What kind of engine problem does a 2009 Jeep Wrangler have?
The contact owns a 2009 Jeep Wrangler. The contact stated while driving 45 mph, smoke was coming from underneath the hood. The contact pulled the vehicle over and the engine ignited into flames. The vehicle was destroyed. There were no injuries.
What causes Jeep Wrangler Unlimited to stall while driving?
The details: Issues started at ca. 75k miles suddenly experiencing temporary lack of power which also feels like transmission (automatic) is not shifting. It got worse when engine stalled.
How much oil does a 2009 Jeep Wrangler burn?
From new this engine burns over 1 quart to 3 quarts of oil per 1000 miles traveled, if you do an oil change at 5000 miles as is recommended there is no oil left in the motor, mopar says this is normal oil consumption. The contact owns a 2009 Jeep Wrangler.
How to check the injector signal on a Jeep Wrangler?
3) Swapped injectors #1 and #2. Drove Jeep with same result as above. 4) Used a NOID Light to check injector signal. All good. 5) Performed a dry compression tests on all cylinders, #1 was 125, about 10 below the next lowest, #3 …
The contact owns a 2009 Jeep Wrangler. The contact stated while driving 45 mph, smoke was coming from underneath the hood. The contact pulled the vehicle over and the engine ignited into flames. The vehicle was destroyed. There were no injuries.
The details: Issues started at ca. 75k miles suddenly experiencing temporary lack of power which also feels like transmission (automatic) is not shifting. It got worse when engine stalled.
What to do about 3.8 liter engine in Jeep Wrangler?
The solution, in this case, is to apply some anti-rust solution to the main parts of the engine. One of the most common comparisons Jeep Wrangler users make is between the 3.6-liter engine and the 3.8-liter engine. In this case, there are many conflicting opinions about the specific characteristics of each.
What does cylinder 3 on a Jeep Wrangler mean?
Driving with a misfire can damage the vehicles catalytic converter. The engine is also not firing all of the fuel, so raw fuel is also passing through cylinder 3 into the exhaust. Mileage may suffer as well when your Wrangler has P0303. P0303 is a cylinder specific misfire code, which means that Cylinder 3 is misfiring and causing the code.