Why is there no power to several fuses?
Last edited by Machster69 on Aug 13 2012, 6:29pm, edited 1 time in total. Check the feed wire to the fuse box. It could be corroded inside the insulation. Seems like about half of the fuses dont work- wonder if it has two seperate feeds going thru the firewall?
What to do if your fuse panel is not working?
If those fuses are okay, check the smaller spade-type fuses in the inside fuse box the same way, and try to determine which fuses are dead and which ones do have twelve volts. Do that with the ignition switch in the “run” position. Based on your findings, I will look at the diagram for your engine and see what the dead fuses have in common.
Where are the fuses on a silveradosierra?
No power from about half of the fuses located on the side of the drivers-side dash. No blown fuses. I pulled the main fuse panel under the hood (thinking that it feeds the smaller panel on the dash), checked for power- all are good. Cleaned and reattached the main battery ground with no effect.
Where are the fuses on a 1998 Chevy 1500?
1998 Chevy 1500 5.7L 4×4. No power from about half of the fuses located on the side of the drivers-side dash. No blown fuses. I pulled the main fuse panel under the hood (thinking that it feeds the smaller panel on the dash), checked for power- all are good.
Last edited by Machster69 on Aug 13 2012, 6:29pm, edited 1 time in total. Check the feed wire to the fuse box. It could be corroded inside the insulation. Seems like about half of the fuses dont work- wonder if it has two seperate feeds going thru the firewall?
If those fuses are okay, check the smaller spade-type fuses in the inside fuse box the same way, and try to determine which fuses are dead and which ones do have twelve volts. Do that with the ignition switch in the “run” position. Based on your findings, I will look at the diagram for your engine and see what the dead fuses have in common.
No power from about half of the fuses located on the side of the drivers-side dash. No blown fuses. I pulled the main fuse panel under the hood (thinking that it feeds the smaller panel on the dash), checked for power- all are good. Cleaned and reattached the main battery ground with no effect.
Can a fuse be turned off with zero volts?
If you find twelve volts on both test points, that fuse is good. If you find zero volts on both sides, that circuit is turned off. You are looking for any fuse that has twelve volts on one test point and zero volts on the other one.