Where to find torque specs for struts?
2. Shouldn’t we re-torque the top 3 nuts to 59 ft lbs after the car is lowered to the ground? Since the nuts will carry the weight of the car, after it is lowered, the torque might be less than 59? 3. Similarly for the end links, we should just torque it to something like 15 ft lbs. Then at the end, drive it up a ramp and torque it to 29, correct?
How to install a lower strut on a car?
TWO LOWER BOLTS STYLE: • (Fig. 4) Remove and save lower mounting nuts (G) and bolts (H). Separate lower strut mount from steering knuckle. • (Fig. 1) Remove and save the bearing plate upper mounting nuts (A). (P-Pack included with new nuts.) • Remove the strut assembly from vehicle (Fig. 5, 6 & 7).
What are the torque guidelines for Unistrut fittings?
Based on years of field experience, we have developed some basic bolt torque guidelines for Unistrut applications. For non-through bolt connections (e.g., channel nut connections), consult the table below: Although adhering to the guidelines outlined above should yield a secure connection, some disclaimers are in order.
How do you install spindle to strut assembly?
Push or tap spindle assembly onto strut and remove screwdriver from pinch joint opening. Install spindle-to-strut assembly pinch bolt into spindle and through strut (Fig. 3). Torque bolt (E) to the value shown in the original equipment service manual. • Obtain replacement bolts if threads are bent or damaged. TWO LOWER BOLTS STYLE:
2. Shouldn’t we re-torque the top 3 nuts to 59 ft lbs after the car is lowered to the ground? Since the nuts will carry the weight of the car, after it is lowered, the torque might be less than 59? 3. Similarly for the end links, we should just torque it to something like 15 ft lbs. Then at the end, drive it up a ramp and torque it to 29, correct?
TWO LOWER BOLTS STYLE: • (Fig. 4) Remove and save lower mounting nuts (G) and bolts (H). Separate lower strut mount from steering knuckle. • (Fig. 1) Remove and save the bearing plate upper mounting nuts (A). (P-Pack included with new nuts.) • Remove the strut assembly from vehicle (Fig. 5, 6 & 7).
Push or tap spindle assembly onto strut and remove screwdriver from pinch joint opening. Install spindle-to-strut assembly pinch bolt into spindle and through strut (Fig. 3). Torque bolt (E) to the value shown in the original equipment service manual. • Obtain replacement bolts if threads are bent or damaged. TWO LOWER BOLTS STYLE:
When to apply torque to rear suspension parts?
Suspension torque should be applied when suspension parts are loaded See answer for #1. Tightening the top nuts in the rear can be a challenge. If you can get a torque wrench on them you are a better man than I.
How big are the lug nuts on a Toyota Highlander?
Lug nuts for a 2012 Highlander is 76 ft-lbs. My crystal ball is out for repair so I have no idea what year your vehicle is but I’m assuming it’s a 2nd generation Highlander. 08. Thanks for the lug nuts. I am really concerned about the caliper bracket.
Can a torque wrench be used on Toyota brakes?
You won’t find the dealer or mechanic using a torque wrench doing your brakes. The main big bracket is good and tight for sure w/1/2″ ratchet, Done. I would not use a Johnsons/breaker bar on them. Never get them off next time!! I got the above from the toyota parts department… We found the diagram. I installed a powerstop brake kit and rotors.
What’s the tyre pressure on a Toyota Yaris?
Model Year of Manufacture Tyre Size Pressure Front (PSI) Pressure Rear (PSI) Celica (ZZT) 99 – 06 205/50R16 32 32 Yaris 11 – 21 175/65R15 View Tyre Pressure View Tyre Pressure Yaris 11 – 21 185/60R15 33 32 Yaris 11 – 21 195/50R16 34 32