What does the P2004 diagnostic trouble code mean?
All our repairs are backed by our 12-month / 12,000-mile warranty. The P2004 diagnostic trouble code indicates that the intake manifold runner control (IMRC) is stuck in the open position on Bank 1.
When to use the P2004 trouble code on an intake manifold?
Repairing or replacing IMRC solenoid connector that is corroded. Replacing IMRC butterfly valve plates (in order to do this, the intake manifold assembly will need to be replaced) The PCM may store the P2004 trouble code if the IMRC butterfly valve plates become detached from the IMRC actuator.
What causes a P2004 engine to not run?
For the most part, the biggest danger of this error code is poor performance and fuel efficiency. If your cylinder head has all the cylinder valves connected, then your engine may not run at all. The problem with one cylinder may be causing all the cylinder not to fire.
What does the P2004 Ford engine light mean?
Engine Light ON (or Service Engine Soon Warning Light) P2004 FORD Meaning The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers.
What does the code P2004 mean on a car?
What does code P2004 mean? Code P2004 stands for Intake Manifold Runner Control Stuck Open Bank 1. The intake manifold directs air into the engine via a series of runners. To improve engine performance, many late-model vehicles use what’s referred to as an intake manifold runner control (IMRC) system.
For the most part, the biggest danger of this error code is poor performance and fuel efficiency. If your cylinder head has all the cylinder valves connected, then your engine may not run at all. The problem with one cylinder may be causing all the cylinder not to fire.
How much does it cost to fix a P2004 Ford code?
The cost of diagnosing the P2004 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P2004 FORD code detected?
What was the code for the P2004 intake manifold runner?
2009 Doge Journey SE, 2.4L V4 with 87000 miles Code 1 � p2004 “Intake Manifold Runner Control Stuck Open Bank 1” – I replaced the intake manifold runner control valve. It was relatively easy. 3 bolts and 1 connector.
What does the code P2004 on an intake manifold mean?
If you are like most people, you may not know what the intake manifold is, or what it means for it to be stuck open. What does the code P2004 mean? The intake manifold is the part of the engine that supplies the cylinder head with the mixture of fuel and air.
What does variable tumble shutter valve on Mazda P2004 mean?
P2004 MAZDA Meaning The Powertrain Control Module (PCM) monitors mass the variable tumble shutter valve using the variable tumble position sensor.
P2004 MAZDA Meaning The Powertrain Control Module (PCM) monitors mass the variable tumble shutter valve using the variable tumble position sensor.
What should I look for in a P2004 engine?
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals. The cost of diagnosing the P2004 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type.
What does code p2005 mean on engine vacuum?
Note: It’s also a good idea to check the vacuum hoses on system that’s controlled by engine vacuum. P2005: Code P2005 indicates the PCM determined the bank 2 IMRC actuator is stuck in the open position. P2006: Code P2006 indicates the PCM determined the bank 1 IMRC actuator is stuck in the closed position.
All our repairs are backed by our 12-month / 12,000-mile warranty. The P2004 diagnostic trouble code indicates that the intake manifold runner control (IMRC) is stuck in the open position on Bank 1.
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals. The cost of diagnosing the P2004 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type.
Note: It’s also a good idea to check the vacuum hoses on system that’s controlled by engine vacuum. P2005: Code P2005 indicates the PCM determined the bank 2 IMRC actuator is stuck in the open position. P2006: Code P2006 indicates the PCM determined the bank 1 IMRC actuator is stuck in the closed position.