What is the DTC code for OBD-II?
This generic powertrain diagnostic trouble code (DTC) typically applies to all OBD-II equipped vehicles that use a drive-by-wire throttle control system including but not limited to vehicles from Dodge, Jeep, Chrysler, Volvo, Fiat, Mitsubishi, etc.
What does the p2173 OBD-II trouble code mean?
The P2173 OBD-II trouble code is one of number of possible codes that indicates that the Powertrain Control Module (PCM) has detected a malfunction in the operation of the Throttle Actuator Control System.
What does p2173 mean in throttle actuator control system?
This and related codes ( P2172, P2173, P2174, and P2175) all indicate detected air flow problems. Code P2173 is set by the PCM when high air flow is detected in the throttle actuator control system. This code can be related to a Throttle Actuator Control System malfunction, but it is possible that another issue is setting this code.
How long is a non critical DTC code?
Non-critical codes include those that light up the Malfunction Indicator Lamp (MIL), also known as the Check Engine Light. Type two codes also store a freeze-frame that has failed consecutively after two driving cycles. A DTC code is five characters long.
This generic powertrain diagnostic trouble code (DTC) typically applies to all OBD-II equipped vehicles that use a drive-by-wire throttle control system including but not limited to vehicles from Ford, Dodge Ram, Kia, Jeep, Chrysler, Mazda, Chevy, etc.
What does the p2110 OBD-II trouble code mean?
What the P2110 code means P2110 is an OBD-II generic code for the engine control module (ECM) detecting a major failure in the throttle actuator control (TAC) system causing the ECM to go into failure mode and limiting the engine to a specified RPM limit. What causes the P2110 code?
What is the p2110 throttle actuator control system?
2007 Chevy Aveo5 Started today after one day sitting fast idle very rough. Checked codes idiot light was on codes P2106,P2110,P2135,P2101. cleaned intake with gum-out just engine running sucking it in. Reset computer codes. Restarted light off ran a little smoother still rough and about 1200 rpm nor…
What does the p2118 code on the ECM mean?
What the P2118 code means. When the engine control module (ECM) detects out-of-range voltage or poor performance from the throttle actuator control motor, the P2118 code is set along with a Check Engine Light on the dashboard. When the P2118 code is set, it also triggers a failsafe mode to prevent damage to the vehicle.
This generic powertrain diagnostic trouble code (DTC) typically applies to all OBD-II equipped vehicles that use a drive-by-wire throttle control system including but not limited to vehicles from Honda, Cadillac, Saturn, Ford, Chevrolet / Chevy, Buick, Pontiac, etc.
When is the idle position is not learned?
Code P2176 is set by the PCM in the situation where the idle position is not learned within the throttle actuator control system. The Throttle Actuator Control System is duty cycle controlled by the PCM and the function of the system is limited when other fault codes are detected.
What does the p2176 OBD-II trouble code mean?
The P2176 OBD-II trouble code is one of number of possible codes that indicates that the Powertrain Control Module (PCM) has detected a malfunction and is limiting the operation of the Throttle Actuator Control System
How to get DTC in area of diagnostics?
6 – To get the DTC within an area of diagnostics, push and hold the odometer reset button in for 5 seconds and release. If there are any DTC’s the code will be displayed or the word “none” will appear if there are no DTC’s. Push the odometer reset button again to view additional codes if they exist.
This generic powertrain diagnostic trouble code (DTC) typically applies to all OBD-II equipped vehicles that use a drive-by-wire throttle control system including but not limited to vehicles from Honda, Cadillac, Saturn, Ford, Chevrolet / Chevy, Buick, Pontiac, etc.
Code P2176 is set by the PCM in the situation where the idle position is not learned within the throttle actuator control system. The Throttle Actuator Control System is duty cycle controlled by the PCM and the function of the system is limited when other fault codes are detected.
The P2176 OBD-II trouble code is one of number of possible codes that indicates that the Powertrain Control Module (PCM) has detected a malfunction and is limiting the operation of the Throttle Actuator Control System
What happens if there are no DTC’s on the odometer?
If there are any DTC’s the code will be displayed or the word “none” will appear if there are no DTC’s. Push the odometer reset button againto view additional codes if they exist. Record the codes. If DTC’s are not to be cleared, Press and release the odometer reset button.