How do you shift a Jeep into neutral?
Shift the transmission into NEUTRAL. 7. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case NEUTRAL (N) button (located by the selector switch) for four seconds, until the light behind the N symbol starts to blink, indicating shift in progress.
How do you manually put an automatic car in neutral?
Depress the clutch if you have a manual transmission, and move the gearshift to the center position on the gearbox. This is the neutral position. Release the clutch. Always engage the parking brake before putting your car in neutral.
How do you put a Jeep Wrangler into neutral?
Here’s how to do that: Shift the automatic transmission into NEUTRAL (N) or depress the clutch pedal on a manual transmission. Shift the transfer case lever into desired position (2-Hi, 4-Hi or 4-Lo) Shift the automatic transmission into DRIVE (D) or release the clutch on a manual transmission.
How to tow a Jeep Wrangler Unlimited behind an RV?
How To Tow A Jeep Wrangler Unlimited Behind An RV. First, the transfer case must be shifted into NEUTRAL. Here’s how to do that: Key must be in the “accessory” position: Depress and hold the brake pedal. Set Parking Brake. Shift an automatic transmission into NEUTRAL (N) or depress clutch pedal on manual transmission.
What’s the best way to shift a Jeep Wrangler?
Shift the automatic transmission into NEUTRAL (N) or depress the clutch pedal on a manual transmission. Shift the automatic transmission into DRIVE (D) or release the clutch on a manual transmission. Note: It may be easier to shift the transfer case into position if you start the engine on the Jeep first.
How to get a flat on a Jeep Wrangler?
Shift the automatic transmission into DRIVE (D) or the manual transmission into gear. Release the brake pedal and ensure that there is no vehicle movement. IMPORTANT: Shut the engine off and place the ignition key into the unlocked OFF position.* Shift the automatic transmission into PARK (P). Apply the parking brake.