Are there any turn signals on a Jeep Wrangler?
No turn signals, hazards or brake lights…so I figured I blew the multifunction switch. Today I replaced the multifunction switch, removed all LED bulbs and replaced with the standard bulbs and reinstalled the OEM flasher relay into the new multifunction switch. Still no turn signals, hazards or brake lights.
Are there blinkers on a 2002 Jeep Wrangler?
I have a 2002 TJ Sport, all stock and no PO modifications. Yesterday I swapped out the front marker, side marker, tail and reverse light bulbs with LED’s from superbrightleds.com (using the stock housings) and installed their LED turn signal relay.
What does the green light mean on a Jeep Wrangler?
The green with red tracer is your brake/turn signal (check with test light to see if it flashes), and the purple with black (i believe) is your reverse. See what you get at those wires. If there is power there and the signal is flashing, it is likely a ground issue.
Where are the fuses on a Jeep Wrangler?
Get a meter & check fuse 27 in the PDC & fuses 2 & 13 in the fuse block behind the glove box. Ok I’ll try that too. Thanks for your help! I appreciate it man My rear turn signals don’t work front ones flash fast and rear hazards don’t work but front does. No corrosion in bulbs they light up with headlights.
No turn signals, hazards or brake lights…so I figured I blew the multifunction switch. Today I replaced the multifunction switch, removed all LED bulbs and replaced with the standard bulbs and reinstalled the OEM flasher relay into the new multifunction switch. Still no turn signals, hazards or brake lights.
I have a 2002 TJ Sport, all stock and no PO modifications. Yesterday I swapped out the front marker, side marker, tail and reverse light bulbs with LED’s from superbrightleds.com (using the stock housings) and installed their LED turn signal relay.
The green with red tracer is your brake/turn signal (check with test light to see if it flashes), and the purple with black (i believe) is your reverse. See what you get at those wires. If there is power there and the signal is flashing, it is likely a ground issue.
Are there brake lights on a Jeep Wrangler?
Today I replaced the multifunction switch, removed all LED bulbs and replaced with the standard bulbs and reinstalled the OEM flasher relay into the new multifunction switch. Still no turn signals, hazards or brake lights. The standard bulbs and OEM relay all worked just fine before switching to the LED bulbs.
Get a meter & check fuse 27 in the PDC & fuses 2 & 13 in the fuse block behind the glove box. Ok I’ll try that too. Thanks for your help! I appreciate it man My rear turn signals don’t work front ones flash fast and rear hazards don’t work but front does. No corrosion in bulbs they light up with headlights.
Today I replaced the multifunction switch, removed all LED bulbs and replaced with the standard bulbs and reinstalled the OEM flasher relay into the new multifunction switch. Still no turn signals, hazards or brake lights. The standard bulbs and OEM relay all worked just fine before switching to the LED bulbs.
Why do my hazard lights work, but not my turn signals?
Turn signals only work when the ignition is on; hazard lights work whether the ignition is on or not. The two systems have separate power supplies, so they have separate fuses. You may have a blown fuse. Different vehicles use different circuits, and it is not possible to accurately diagnose the fault with the small amount of information provided.
Is the emergency flasher and turn signal relay the same?
In many cars, the relays are the same type therefore they can be interchanged and you can put your turn signal relay where your emergency flasher relay is and your emergency flasher relay where your turn signal relay is and see if your emergency flashers stop and your turn signals start working.