How do I calibrate the compass on my Jeep Grand Cherokee?
- Turn ON the ignition switch.
- Press the UP or DOWN button until the Setup (Customer-Programmable Features) menu is reached, then press the SELECT button.
- Press the DOWN button until “Calibrate Compass” is displayed in the EVIC.
- Press and release the SELECT button to start the calibration.
How do I Reset my Jeep Grand Cherokee?
Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed. “2011 Jeep Grand Cherokee Owner’s Manual”; Chrysler Group LLC; 2010
How does the Immobilizer work on a Jeep Grand Cherokee?
by David Clair. Some models of the Jeep Grand Cherokee are equipped with an immobilizer anti-theft system that disables the engine. The system is activated when something other than an authorized key is used to try to start the engine. Most models are also equipped with an alarm system as part of the security system.
What to do if your Jeep Grand Cherokee wont start?
There are certain emissions-related codes that may require a Chrysler/Jeep dealership to inspect and clear. Disconnect the scan tool from the DTC port when done. If you do not have a quality scan tool, refer to Step 3. Disconnect the negative battery cable and leave it disconnected overnight.
How do you turn off the alarm on a jeep?
Press the power door-lock switch on the keyless entry fob. Close the driver’s side door. Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed.
When to reset the Immobilizer on a Jeep Grand Cherokee?
The system is activated when something other than an authorized key is used to try to start the engine. Most models are also equipped with an alarm system as part of the security system. If something triggers the immobilizer or the alarm system, you need to reset and rearm the system.
How do you reset the remote on a Jeep Cherokee?
The programming sequence will also allow you to reset the remote systems, and you can have them ready to use in minutes using just the ignition key. Enter your Jeep and press the Lock button on your keyless remote five times in 10 seconds. Insert your key into the car’s ignition, turn it to the “Run” position and wait for the car’s chimes to stop.
Can you reset the panic alarm on a Jeep Cherokee?
The Jeep’s remotes allow you to control your panic alarm, your door locks and your trunk release, and can be programmed completely from your driver’s seat. The programming sequence will also allow you to reset the remote systems, and you can have them ready to use in minutes using just the ignition key.
How to remove skim key from Jeep Grand Cherokee?
JEEP SKIM KEY PROBLEM… SOLVED!!!! ECM REPROGRAMMED Jeep Grand Cherokee. Remove SKIM from ECM If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.