What are the specs of a 1997 Jeep Wrangler?
Detailed features and specs for the Used 1997 Jeep Wrangler including fuel economy, transmission, warranty, engine type, cylinders, drivetrain and more. Read reviews, browse our car inventory, and more.
Is there more gas in a 1997 Jeep Wrangler?
Yes they use a little more gas but it is also the fact that they have a smaller sized gas tank. This Jeep will get up to speed and has plenty of pep. I have many confuse with my jeep with way newer models.
Is the Jeep Wrangler reliable at high mileage?
Jeeps engines are widely considered to be bullet-proof and reliable. High mileage Wranglers should not be your main concern but rather how the Jeep was maintained. Year models between 2000 and 2001 which used the 0331 cylinder head were prone to cylinder head cracking and oil leaks.
How many miles can a Jeep Wrangler run?
The service documents will reveal a lot about the history of the vehicle and what repairs have been done over the years. If well maintained these 4.0 engines can easily run into 300K miles with little hassle. “My ’91 YJ has 168,000 on the 4.0 and runs like a top.
Specs datasheet with technical data and performance data plus an analysis of the direct market competition of Jeep Wrangler Sport 4.0L (man.
How big is the engine on a Jeep Wrangler?
1 1997-2002 – 4 cylinder 2.5L 2 151 cubic inches 3 120hp @ 5,400 RPM 4 140 ft/lbs @ 3,400 RPM 5 OHV 6 2 valves/cylinder 7 compression ratio: 9.20:1 (97-00) / 9.10:1 (01-02) 8 1997-2002 – 6 cylinder 4.0L 9 242 cubic inches 10 181hp @ 4,600 RPM
What does NP stand for in Jeep Wrangler?
NP stands for “New Process” which is the brand, if you will. Dana 30 high pinion – reverse cut – 27 spline, 1.16″ diameter shafts, 7.13″ ring gear – used 87-95. All are vacuum disconnect, Some 95’s have 5-297x u-joints due to the start of new model change over, all others have 5-260x u-joints.
What are the specs on a Jeep YJ?
I6 Standard – 3.07:1, 3.54:1 or 3.73:1 – must verify with the tag on the axle or by pulling the differential cover and reading the numbers stamped in the ring gear or by counting revolutions of wheel versus driveshaft.
How to calculate the gear ratio of a jeep?
When you change your tire size you need to make sure you have the right gearing to get optimal fuel economy and power. A good way to calculate this is to multiply .12 by your Jeeps tire diameter (Example: .12 X 38″ = 4.56). Here at JeepHut we have a made an easy to read chart to help you decide what is on the best gearing for your Jeep.
NP stands for “New Process” which is the brand, if you will. Dana 30 high pinion – reverse cut – 27 spline, 1.16″ diameter shafts, 7.13″ ring gear – used 87-95. All are vacuum disconnect, Some 95’s have 5-297x u-joints due to the start of new model change over, all others have 5-260x u-joints.
What kind of transmission does a Jeep Wrangler have?
There have been quit a few questions about “what transmission is in my TJ”. So….. I set down and copied and pasted and did a little color editing, from the TJ FSM’s (full service manual) Here they are……. Knows a couple things… That’s very cool and useful information, thanks! I have bookmarked your post for a future all-in-one reference.
What does 10 spline mean on Jeep Wrangler transmission?
Click to expand… The 10 spline input refers to the input shaft of the transmission that mates to the engine. Here is my NV3550 input shaft while doing a clutch replacement. And the 23 spline output refers to the rear shaft that mates to the transfer case.
What kind of engine does a Jeep Wrangler have?
Unfortunately, the AMC 4.0L inline six was replaced by the 3.8 OHV V6, which originated in Chrysler minivans. We think we’re not alone in saying that a minivan engine doesn’t belong in a Wrangler. The Inline six survived until 2006, and it will go down in history as one of, if not the most legendary workhorse engine Chrysler has ever made.
What kind of engine does a jeep straight six have?
But the final, and most important reason that these jeeps are so coveted, is the 4.0L in-line “straight six” AMC engine. Chrysler’s 4.0L Straight Six Engine The 4.0L AMC inline six is known as one of Chrysler’s best engines. Dating back to 1986, its torquey 190 hp engine would commonly chug along for upwards of 300,000 miles.
When did the Jeep Grand Cherokee inline six come out?
Dating back to 1986, its torquey 190 hp engine would commonly chug along for upwards of 300,000 miles. Over the course of nearly 20 years this engine was refined and tweaked before being phased out in 2006. The inline six has powered Cherokees, Grand Cherokees, Wagoneers, Wranglers, and even Comanches.
What kind of car is a 1997 Jeep Wrangler?
It has carried a 42 mile route and completed it in 18 inches of snow/ice. A good keep. We bought it new. I own a 2001 Sahara Wrangler that I bought new.
What is the 0 to 60 time on a Wrangler sport?
In a 1997 test of a Wrangler Sport with the 4.0L inline-6, Open Road magazine netted a 9.5-second 0 to 60 time. For 2002 and later Wranglers, tuning enhancements boost the 4.0L to 190 hp at 4,600 rpm and 235 lb-ft of torque at 3,200 rpm. 1997-2002 transmission choices are a 5-speed manual or 3-speed automatic.
How many miles does a 1998 Jeep Wrangler have?
All trouble free. It now has 240,000 miles.The most reliable vehicle ever. I have only replaced tires, spark plugs and wires, brakes once (my mechanic looked at these in June 2020 and said they are fine). Just replaced the original clutch in June 2020.
What was the last year a Jeep Wrangler was made?
Yet, beginning with the 1997 model, the Wrangler is also a vehicle you could drive every day. It’s the last Wrangler available with the legendary AMC inline-6, and it’s smaller and 400 lb lighter than the 2007-and-later Wranglers, which are not as nimble off road.