Can you remove the injector seal on a Jeep Grand Cherokee?
I believe the injector seal is leaking on cylinder number 4 on my 2002 2.7 crd jeep grand cherokee. You can’r remove the injector without lowering the engine. The workshop manual says support engine and remove engine mount bolts and then lower engine.
Are there 2.7 CRD injectors in the Jeep Grand Cherokee?
Jeep Grand Cherokee 2.7 CRD Injectors, the easy way! I recently bought a Jeep Grand Cherokee with the Mercedes 2.7 CRD engine… I quite like it so will probably keep it for a while.
How to remove fuel injector from cylinder head?
YEP REMOVE TOP ENGINE COVER AND DISCONNECT INJECTORS ELECTRICAL CONNECTOR,REMOVE FUEL RETURN LINE FROM INJECTOR, REMOVE FUEL INJECTOR HIGH PRESSURE LINE, REMOVE FUEL INJECTOR RETAINER AND RETAINING BOLT,THEN REMOVE FUEL INJECTOR FROM THE CYLINDER HEAD.
Why are my injectors leaking on my Jeep Grand Cherokee?
One of the things they suffer with is “the black death” where the injector seals start to leak and then completely gum up the top of the engine with a tar like substance. With prevention often being better than cure, I decided to change the seals before they leaked too bad, there were slight signs of failure.
I believe the injector seal is leaking on cylinder number 4 on my 2002 2.7 crd jeep grand cherokee. You can’r remove the injector without lowering the engine. The workshop manual says support engine and remove engine mount bolts and then lower engine.
Jeep Grand Cherokee 2.7 CRD Injectors, the easy way! I recently bought a Jeep Grand Cherokee with the Mercedes 2.7 CRD engine… I quite like it so will probably keep it for a while.
How big is the injector seal ring on a Mercedes?
The extended threaded shank length, 85.83mm long, 6.0mm dia., 8.8 grade, factory hold down bolt, hold down pawl and injector seal ring are identical part numbers for both the 5 cyl. and 6 cyl. engines.
YEP REMOVE TOP ENGINE COVER AND DISCONNECT INJECTORS ELECTRICAL CONNECTOR,REMOVE FUEL RETURN LINE FROM INJECTOR, REMOVE FUEL INJECTOR HIGH PRESSURE LINE, REMOVE FUEL INJECTOR RETAINER AND RETAINING BOLT,THEN REMOVE FUEL INJECTOR FROM THE CYLINDER HEAD.