What should my Jeep be idling at?
Most cars should idle around 650. The allowable RPM range for emissions testing at idle here is 450-1100, so you are basically at the absolute bottom of that range. Bump it up a bit, mine really likes to idle at about 600.
Why does my Jeep Grand Cherokee start stall idle?
Is this the IAC or possibly the fuel filter.. Its driving me crazy. I have a 1997 Grand Cherokee 5.2L V8. It has a problem running. You can be driving down the road and let your foot off the game and the jeep will just shut right off. If you say pull into a parking spot and let your foot off the gas it will shut off.
Why does my 1989 Jeep Grand Cherokee not start?
I had a good mechanic put a 4.0 Jasper in my 1989 Cherokee. He said it wouldn’t start and he thought the problem was the ECU. He installed an ECU and the Jeep ran fine for about 4000 miles. Then it would start one day but not the next. When it doesn’t start, there is no spark.
What kind of engine does a Jeep Grand Cherokee have?
From Perth in Australia, we have a 2003 JEEP Grand Cherokee Limited V8 with third of a tank of petrol and the engine cuts out going out of the turn of LH & RH corners.
What kind of problem does a Jeep Grand Cherokee have?
I have a 1997 Grand Cherokee 5.2L V8. It has a problem running. You can be driving down the road and let your foot off the game and the jeep will just shut right off. If you say pull into a parking spot and let your foot off the gas it will shut off.
Why does my Jeep Grand Cherokee not start?
Mine is 1994 Grand Cherokee, it does not have the Ballist resistor. It might just be an Xj thing. Awesome info, although I have not looked, nor have had to look, for this at least I know that it can be a potential issue. Mine is 1994 Grand Cherokee, it does not have the Ballist resistor. It might just be an Xj thing.
From Perth in Australia, we have a 2003 JEEP Grand Cherokee Limited V8 with third of a tank of petrol and the engine cuts out going out of the turn of LH & RH corners.
Why does my Jeep Cherokee start then die?
The fuel pressure would shoot to ~31 psi and then as the engine ran for its 20-30 seconds the fuel pressure slowly dropped to 0psi First thought was fuel pump. At this point since I’ve owned my jeep never have done a fuel pump (bought the jeep in 06-07).
What should the pressure be while running a jeep?
:thumbsup:. We pulled the jeep in and tried to start back up, the engine would run for about 20-30 seconds then slowly sputter and die again. We were stumped. We tested full pressure at the rail, Jeep states that while engine running should maintain 31 psi while running (For a 92 XJ).