What happens if you put a lift kit in your Jeep?

What happens if you put a lift kit in your Jeep?

Lift kits lead to bigger tires. Bigger tires lead to new steering parts, better brakes, gearing upgrades, a stronger tire carrier, refinancing your house, etc. Your wife/girlfriend will complain that your Jeep is hard to get into and is scary to drive 33-inch tires will start to look tiny.

Which is the best spring lift for a jeep?

But you can still get hung up.” The JK 2-Door/JKU 4-Door 2.5” Coil Spring Lift Kit w/ 9550 VSS Shocks, however, has its advantages and benefits. The Performance Spacer Lift Kit adds a spacer block, while the 2.5” Coil Spring Lift Kit adds active coils that provide increased suspension and spring travel.

Is it a light decision to lift a jeep?

Just like choosing wheels and tires, the decision to lift a Jeep is not a light decision. The wrong lift can dramatically affect the way a Jeep handles. Because everyone is different, first consider this one important question:

How big of a lift kit do you need for a JKU?

Although we recommend the same 35” tire with either a 2.5” or 3” lift kit, the additional 0.5” adds more ground clearance. Swenson approaches a large obstacle in his coworker’s 2010 JKU with a 2.5″ lift kit and 35” tires. The approach angle clears as he drives the front tires up the wall of the obstacle.

How big does a Jeep body lift need to be?

Body lifts typically range from 1 to 3 inches and can usually be purchased for just a few hundred dollars without new shocks. Body lifts work by providing taller spacers and bolts that are installed between the frame and body of the vehicle. Sounds pretty straightforward right? Not so fast.

Is it possible to lift a Jeep Wrangler?

In our honest opinion, this is certainly NOT the most favorable approach to lifting your Jeep Wrangler or any vehicle for that matter. A body lift is mainly cosmetic and will not actually add any additional ground clearance from the kit itself. It provides zero increase in wheel travel.

Can you replace a body mount on a Jeep Wrangler?

The good news is that you can easily replace your Wrangler’s body mounts. You can also install a body lift, to gain some extra clearance for larger tires, without the need to install a suspension lift.

But you can still get hung up.” The JK 2-Door/JKU 4-Door 2.5” Coil Spring Lift Kit w/ 9550 VSS Shocks, however, has its advantages and benefits. The Performance Spacer Lift Kit adds a spacer block, while the 2.5” Coil Spring Lift Kit adds active coils that provide increased suspension and spring travel.

How to turn Jeep Wrangler sport into a Rubicon?

In this guide, we’ll outline which mods will turn your Jeep Sport into a Rubicon. Our recommended mods can be installed by any enthusiast without much difficulty. Most products shown are available for both the Wrangler JK and Wrangler JL. Upgrading the suspension for off-roading will make the biggest difference to your Sport.

What kind of axle does a Jeep Wrangler sport have?

From the factory, the Sport will have a Dana 30 on the front and Dana 35 on the rear, unless you opt for the rear axle differential. Being able to lock the axles allows the vehicle to put the maximum amount of traction down to the ground. You can go even bigger with one of Mopar’s off-road axle assemblies.

What kind of transfer case do I need for Jeep Wrangler?

A FOX front-end stabilizer will give you even more off-road optimization if you’ve got bigger tires and a lift. A 4:1 transfer case is a good addition to go along with these axles, giving you low gearing for crawling. The standard Command-Trac NV241 part-time transfer case used by the other trims is not as capable off-road.

Do you need a lift kit for a Jeep Wrangler?

What is a Lift Kit? A lift kit replaces your Jeep’s springs and shocks, increasing your ride height. Wranglers are notorious off-roaders, but they can’t clear every obstacle you’ll come across. A lift kit will allow your rig to traverse rougher terrain, and as a general rule of thumb, the taller the lift, the more you can tackle.

How long does it take to lift a Jeep Wrangler?

Everywhere I could find it states that the body lift takes moderate mechanical ability and roughly 6-7 hours to complete. My guess is that it would probably take a pro an hour or less. 2. Suspension Lift Suspension lifts are more expensive than body lifts; however, there are many increased benefits when it comes to the desired outcome.

How tall does a jeep suspension lift need to be?

Suspension lifts range from 2-6 inches. The main downside of taller suspension lifts is anything over a 2.5-inch lift will require a slip yoke eliminator (on YJs and TJs) and a CV driveshaft to prevent driveline vibrations and other issues.

Why do I need a leveling kit for my Jeep Wrangler?

A leveling kit is exactly as it sounds; it levels the natural rake the factory gives Wranglers. Rather than having the front sit lower than the rear, the leveling kit will ensure everything sits, well, level. A common upgrade for Jeepers looking to balance things out after adding a heavier steel bumper and winch.