Which is the best rear axle for a Jeep Wrangler?
The Dana 30 will only be found as a Jeep front axle while the Dana 35 will only be found as a rear axle on Wranglers. Dana 35 axles have earned a very poor reputation in the off-roading world, however, it is a great axle for stock Wranglers.
What kind of axle does a Wrangler Rubicon have?
Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio. The width of the axle shafts is 1.31 inches.
Why do Jeeps have different axles and differentials?
Stronger axles, different gear ratios, and even a tougher differential will help you tackle more difficult trails. Wranglers are known to have a terrain capable and rugged drivetrain. The solid axle design paired with an incredible 4WD system, provides Jeeps with a high degree of versatility and durability.
How are axles measured on a Wrangler model 44?
The non-Rubicon model 44s are the same length. Axle shafts with a u-joint in the center are measured from the center of the u-joint. Measuring front the center to the end of the shaft will get you the inner and outer axle lengths. C-clip axle shafts and semi-float axle shafts are measured slightly differently than the full-float shafts.
What kind of axles does a Jeep Wrangler use?
The Three Wrangler Dana Axles. The Dana portion is the nameplate of Dana Inc., who is the manufacturer of the Jeep axles. There have been a few different axles used in Wranglers over the years with the Dana 44 being the most popular.
Is there a 2007 Jeep Wrangler X Unlimited?
I arrived at my local Jeep Dealer three days ago simply expecting to take a look, as I had done with both the Toyota (FJ) and Hummer (H3) dealers. To my surprise and delight there is now a 2007 Jeep Wrangler X Unlimited parked in my driveway. The four doors, longer wheel base and wider stance are all real attention grabbers.
Which is the best review of a 2007 Jeep Wrangler?
Edmunds’ expert review of the Used 2007 Jeep Wrangler provides the latest look at trim-level features and specs, performance, safety, and comfort. At Edmunds we drive every car we review, performing road tests and competitor comparisons to help you find your perfect car. Read the full in-depth review of the Used 2007 Wrangler at Edmunds.
Why do Jeep JK axles snap and snap?
Because they absorb a tremendous amount of shock loading and torque, it is not at all uncommon for a Wrangler’s axle shaft to bend or even snap on a tough trail. It is for this reason that Jeep Wrangler owners who enjoy more extreme forms of off-roading should upgrade their JK’s axles and hubs.
Is the rear axle seal leaking on my Jeep?
I have Appt with Jeep monday!!!Getting Driveline service plus seal done for $447 But its leaking slow…..so i’m taking it tomorrow just 300 miles to Colorado!! Am I missing something or where are you getting that it’s leaking on the wheel?
Is the rear axle seal leaking in Colorado?
I don’t know how far Colorado is from where you are now, but with the axle seal leaking bad enough that you have it on the tires, it might be better to just take your other Jeep.
I have Appt with Jeep monday!!!Getting Driveline service plus seal done for $447 But its leaking slow…..so i’m taking it tomorrow just 300 miles to Colorado!! Am I missing something or where are you getting that it’s leaking on the wheel?
How big is the rear axle on a Jeep Wrangler?
The YJ Dana 30 hold a reverse cut ring and pinion, but the TJs do not. Both TJs and YJs, however, use a 5×4.5 inch bolt pattern. Dana 35: This was an axle size used on most Jeep rear axles. They had a ring gear diameter of 7 and 9/16 inches. They came with either a 3.21 or 4.10 gear ratio.
I don’t know how far Colorado is from where you are now, but with the axle seal leaking bad enough that you have it on the tires, it might be better to just take your other Jeep.
Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio. The width of the axle shafts is 1.31 inches.
Are there rear differentials for the Jeep Wrangler YJ?
We are proud to offer this remanufactured Dana 35 Rear Differential for the 1987-1995 Jeep Wrangler YJ SUV with Two-Wheel Drive or Four-Wheel Drive. This rear diff is configured with a 3.07, 3.73, or 4.10 gear ratios, and a limited slip… Tracking down remanufactured Jeep differentials for sale to get your Jeep back up and running?
How do I tell what rear end I have?
Measure the diameter of the ring gear. This measurement equals the size of your rear end. Count how many bolts are on the inspection cover. If you have 10 bolts, then your Ford has a 7.5-inch or an 8.8-inch rear end. If you have 12 bolts, then the rear end is a 9 inches.
What is Dana 35 axle?
Spicer Dana 35 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft. Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
What size is a Dana 44 axle?
Dana 44 axle tube diameter ranges from 2.5″ to 3″, while the Dana 60 axle tube diameter is 3.125″. So, while the Dana 60 has a stronger housing than the Dana 44, it’s not by a massive amount, especially for the larger Dana 44s.
The Dana 30 will only be found as a Jeep front axle while the Dana 35 will only be found as a rear axle on Wranglers. Dana 35 axles have earned a very poor reputation in the off-roading world, however, it is a great axle for stock Wranglers.
When to change the axle on a jeep?
However, many jeep owners still believe swapping a new, beefier axle is more cost effective and better. As a general rule of thumb, most owners agree that once a jeep has been modified to run 32″ or 33″ tires, it is time to start thinking about upgrading the rear dana 35.
What are the dimensions of a jeep axle?
Axle housing diameter = 2.625″ Ring gear diameter = 7.562″ Note: Carrier break means the carrier needs to be changed as well when gearing up or down past this point. The Dana 44 was one of the most common axles found under Jeep vehicles throughout the years.
What’s the difference between the Dana axles and axles?
The Dana 30 is once again at the front, but all Rubicon JKs will have Dana 44s in the front and rear. JL Wranglers have a Dana 30 up front and a Dana 35 in the rear. The exception as always is the Rubicon (44s front and back). What’s the Difference Between the Dana Axles?
The Dana 30 is once again at the front, but all Rubicon JKs will have Dana 44s in the front and rear. JL Wranglers have a Dana 30 up front and a Dana 35 in the rear. The exception as always is the Rubicon (44s front and back). What’s the Difference Between the Dana Axles?
What kind of axle does a Jeep Wrangler have?
TJ Wrangler:1997-2006 Rear 3.73 ratio Dana 44 optional on Sport and Sahara models, also standard on X model Rocky Mountain Edition. 2003-2006 Rubicons also come with 44’s front and rear, and the rear Dana 44 has been an option for TJ’s for quite some time.
How are axle lengths measured on a wrangler?
Measuring front the center to the end of the shaft will get you the inner and outer axle lengths. C-clip axle shafts and semi-float axle shafts are measured slightly differently than the full-float shafts. C-clip and semi-floats are measured from the end of the splines to the front of the mounting flange.
The non-Rubicon model 44s are the same length. Axle shafts with a u-joint in the center are measured from the center of the u-joint. Measuring front the center to the end of the shaft will get you the inner and outer axle lengths. C-clip axle shafts and semi-float axle shafts are measured slightly differently than the full-float shafts.
What kind of axle assemblies do jeeps use?
Keep the tubes spinning and transfer that power with G2 and Rock Jock assemblies. Stronger than factory axles, they’re ready to bolt down so you can continue jeeping in no time. Put these bulletproof axles under your rig and watch them take a beating as you off-camber or two-wheel. True and trustworthy, there is no competition.
Why does my Jeep Wrangler make a knocking sound?
Sometimes a knocking or ping sound can be caused by something as simple as using the wrong gas. The octane rating corresponds to the amount of compression that it can take before igniting. Octane rating matters. Your engine was designed to use the type of fuel recommended by Jeep. Spark Plugs
How many doors does a 2010 Jeep Wrangler have?
The 2010 Jeep Wrangler is a compact SUV that can hold four or five, depending on the layout. There are two body styles — the Wrangler, which is a two-door model, and the Wrangler Unlimited, which has four doors. You also can choose between a hardtop and a soft-top model. The two-door Wrangler is available in three trims, Sport, Sahara and
What’s the difference between a 2010 Jeep Wrangler?
For off-roading Wrangler enthusiasts, the 2010 model’s extra five inches in width over the previous generation may take some getting used to. Back in town, the more livable Wrangler still isn’t as buttoned down as SUVs like the Nissan Xterra or Toyota FJ Cruiser. What’s New?
Is the windshield still removable on a 2010 Jeep Wrangler?
In proper Jeep fashion, the 2010 Wrangler’s doors (full-framed or half) are still removable, its windshield is still foldable and the hinges and latches are still exposed. The familiar signature seven-slot grille and round headlamps present a face as distinctive and recognizable as any on the road.
What kind of Yoke does a Jeep Wrangler use?
Rear Prop Shaft Slip Yoke; Uses a Spicer 1310 Series (3.219″ O.D.) Universal Joint. Jeep Wrangler (YJ) (1987-1995) with Model 35 Rear Axle. Jeep Wrangler (TJ) (1997-2006) with Model 35 Rear Axle. Jeep Grand Cherokee (ZJ) (1993-1998) with Model 35 Rear Axle. 1987-1995 Jeep Wrangler YJ w/ Dana 35 Rear Axle; w/ 3.219″ Wide U-Bolt.
How big is the drive shaft on a YJ Wrangler?
Wide U-Joint; Dana 35 U-Bolt Yoke Kit; 26 Splines. Collapsed Measurement: 16.75-inches Extended Measurement: 20.25-inches After lifting your Jeep YJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft. Includes better quality CV joints.
Can a broken drive shaft on a Jeep Wrangler YJ be repaired?
Don’t let a damaged or broken drive shaft on your Jeep Wrangler YJ get you down. We offer the largest selection of OEM and aftermarket Jeep Wrangler YJ drive shaft parts around. Fix that front drive shaft or change the pinion nut and seal.
What kind of drivetrain does a Wrangler have?
A Wrangler’s drivetrain is its bread and butter. That said, there is always room for improvement, or to hone it to your off-road needs. Stronger axles, different gear ratios, and even a tougher differential will help you tackle more difficult trails. Wranglers are known to have a terrain capable and rugged drivetrain.
What is the rear bolt pattern on a Jeep Wrangler?
Dana 44 Rear Bolt In TJ Jeep Wrangler Axle AssemblySemi-Float with Dual Bolt Pattern: 5×4.5 and 5×5.5Base Axle Includes: New Dana 44 Casting Bracketed with TJ Heavy Duty Brackets (100% USA Made) Semi-Float Set 10 Housing Ends (USA Made) (Roller Tapered Bearings) Welded on to Accept Stock TJ Disc or Drum Brakes
Measuring front the center to the end of the shaft will get you the inner and outer axle lengths. C-clip axle shafts and semi-float axle shafts are measured slightly differently than the full-float shafts. C-clip and semi-floats are measured from the end of the splines to the front of the mounting flange.
How does a Jeep Wrangler TJ axle work?
The axle rods or shafts of your Jeep Wrangler TJ transfer rotational energy to the wheels and tires. When you take your vehicles on rigorous off-road trails, it puts additional stress and strain on these crucial components. It is not at all uncommon for Jeep Wrangler TJ axles and hubs to sustain premature wear.
What kind of axle does a jeep LJ have?
ALL LJ models come standard with a D44 rear ALL. Picture of D44 rear for TJ/LJ models… TJ models can have either a D35 or D44 rear axle. D35 rear picture…
Do you need to replace rear neck down shafts in Jeep Wrangler?
Alloys and ARBs sounds better. Although, the stock shafts in the rear are more than is needed for 40s. They will stay stock. The front neck down shafts are getting replaced.
What kind of Axel rods do I need for my Jeep Wrangler?
When this happens, it is often a good idea to upgrade to premium axel rods, instead of simply replacing them with stock shafts. The rods we sell are specifically designed for aggressive off-roading activities. They are heat-treated, which makes them up to 35 percent stronger than ordinary axel shafts.