How do you put a Jeep Liberty in neutral?
– Starting And Operating – Jeep Liberty Owner’s Manual….
- Bring the vehicle to a complete stop and shift the transmission to PARK.
- Turn OFF the ignition.
- Turn the ignition switch to the ON/RUN position, but do not start the engine.
- Press and hold the brake pedal.
- Shift the transmission into NEUTRAL.
What does the part time light mean on a Jeep Liberty?
“Part time” would mean it comes on automatically when wheel spin is detected, and shuts off when not needed. The light could mean a couple of things: It is possible you’ve engaged Part-Time 4WD and the light is just letting you know (it should be off if on dry pavement).
How to shift into neutral on a Jeep Liberty?
Bring the vehicle to a complete stop and shift the transmission to PARK. 2. Turn OFF the ignition. 3. Turn the ignition switch to the ON/RUN position, but do not start the engine. 4. Press and hold the brake pedal. 5. Shift the transmission into NEUTRAL.
Can a Jeep Liberty be switched to 4 wheel drive?
The Jeep Liberty is equipped a 4-speed, four-wheel drive system called “Command –Trac.” The system provides two-wheel drive, neutral, four-wheel drive high range and four-wheel drive low range positions. Shifting the Jeep into four-wheel drive may become necessary on slippery or icy roads, and switching between the
How do you change gears on a Jeep Liberty?
Shift the transmission back into gear and slowly accelerate. Do not drive your Jeep over 25 miles per hour in low range, or you will damage the transfer case. Shifting back up through the gears is the reverse of the procedure in the preceding steps. “Jeep Liberty Owners Manual”; The Chrysler Group; 2004
When to shift a jeep to four wheel drive?
Shifting the Jeep into four-wheel drive may become necessary on slippery or icy roads, and switching between the high and low range may become necessary if the road conditions deteriorate as you travel on them. The four-wheel drive is also very helpful if you travel off highway.