How to remove glass from front door window?
9 Carefully peel back the waterproof sheet from the door. 10 Remove the door weatherstrip and rubber end block. 11 Lower the window and, working through the aperture, disconnect the linkage arms from the bottom rail. 12 Lift the glass upwards from the door.
What’s the best way to remove a door panel?
k. Pull the bottom of the door panel out. Using a small plastic pry bar, gently pull the bottom of the door panel away from the bottom of the door by tugging on the plastic retainer clips behind the panel. k. Plastic pry bar k (2). Pop off the door panel from the bottom. l. Lift and angle the door panel away from the door glass lip. l.
How to remove quarter window from Ford door?
24 Remove the upper and lower screws which secure the divisional channel and quarter window in position. Remove the door quarter window. 25 Detach the window channel from the regulator ball and socket joints then raise and remove the window from the interior side of the door. 26 Refitting of the door glass is the reversal of the removal procedure.
How do you remove window glass in a Ford manual?
Detach the channel from the door and remove the door glass as described previously in this Section for models with manual windows. 50 Grip the motor mounting plate in one hand and the regulator in the other. Raise the regulator and at the same time pull the motor towards the hinge end of the door.
Can a window switch be removed from a door?
This is a good idea for small children or animals who may accidentally fall out of a moving vehicle. The window switch on the driver door is usually combined with the door locks. This is called the switch panel or cluster panel. Some switch panels have removeable window switches and other switch panels are one piece.
What’s the cut out switch on the front passenger door?
For the front passenger and rear passenger doors, there is only a window switch and not a switch panel. The cut out switch is the power supply switch to the passenger doors.
How do you remove a window regulator from a window?
STEP 1: Gain access to the window regulator assembly by removing the interior trim panel. STEP 1a: Gently pry around plastic mirror trim piece and remove. STEP 1b: Gently pry around handle bezel and remove bezel. STEP 1c: Gently pry around switch and remove switch. STEP 1d: Disconnect electrical connections to switch.
What to do if your front door window is shattered?
If your old window is shattered inside the door, you’ll have to remove all the big pieces by hand. Wear very thick gloves when doing this and dispose of it properly. Once all the big pieces are out of the way you’ll need to use your shop vac to vacuum up all the small pieces.