What is the average gear ratio?
A gearing ratio between 25% and 50% is typically considered optimal or normal for well-established companies.
What’s the gear ratio on a Honda Wrangler?
Some of the possible ratios include 3.07, 3.55, 3.73, and 4.10. Wranglers that are equipped with the Rubicon package typically come with the 4.10 gear set in their Dana 44 axles. The chart below shows the relationship between gear ratios and tire size.
What’s the best gear ratio for a 35?
My charts are not the gospel on gear ratio’s, but will give you a decent idea. From experience and friends it seems that 4.56 is a good manual final axle ratio, and 5.38 (07-11) or 5.13 (12-up) for the Automatics on 35’s, 37’s and up require a ratio bump in the same direction.
What happens when you change gears on a wrangler?
Your Wrangler’s gear ratio has an affect on how much torque and horsepower is available to you across the RPM band. Changing your gears shifts the power band forward or backwards, and can compensate for modifications like larger tires. What Does a New Set of Gears Do?
What are the gears on a 2014 Jeep Wrangler?
On my 2014 JK Sport B in Canada the 3.73 gears were a $95 option I took. Max Tow not available on 2 drs. If your window sticker does not show the 3.73 gears as an option you have 3.21 gears. On my 2014 JK Sport B in Canada the 3.73 gears were a $95 option I took.
What’s the gear ratio on a Jeep Wrangler?
Description: Synchronized in all forward gears and Reverse, multi-rail shift system with top-mounted shift lever Low Range Ratio: 2.72:1 Axle Ratios: 3.45, 3.73, 4.10 Axle Ratios: 3.45, 3.73, 4.10 Capricorn, Torero, gts and 1 other person like this.
How big is the rear axle on a Jeep Wrangler?
The YJ Dana 30 hold a reverse cut ring and pinion, but the TJs do not. Both TJs and YJs, however, use a 5×4.5 inch bolt pattern. Dana 35: This was an axle size used on most Jeep rear axles. They had a ring gear diameter of 7 and 9/16 inches. They came with either a 3.21 or 4.10 gear ratio.
When do you need shorter gears on Wrangler?
If you are planning on doing a lot of off-roading or are only upgrading to a larger set of tires, you should probably install shorter gears. When larger tires are installed, you have several things working against you: the diameter of the tire, rotational mass, rolling resistance, and the added weight of the tires.
What kind of axle does a Wrangler Rubicon have?
Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio. The width of the axle shafts is 1.31 inches.