How can I troubleshoot my Turn signal relay?

How can I troubleshoot my Turn signal relay?

Oftentimes turn signals are one of the easiest systems in your car troubleshoot. If you are having issues with your turn signal relay, you will be able to notice right away. There are a few signs that will alert you about this problem.

Why are my turn signal lights not working?

Changes in the flashing rate of the turn signal lights aren’t common and hard to notice as one of turn signal problems. In case this occurred after replacing the flasher or one of the light bulbs, you must have installed the wrong type of flasher or bulb for your vehicle model.

When do you need to replace a turn signal Flasher?

The good news is that all of these symptoms point to two possible issues, a bad turn signal relay or a dead bulb. If the signal blinks really fast, you have a bulb out on that side. If it doesn’t come on at all or doesn’t blink, you’ll need to replace your turn signal relay.

Which is part of the turn signal relay?

This is all done by a system called the turn signal relay. The majority of turn signal lights are controlled by a flasher. This flasher is also known as a relay that is a part of the electrical system. This system controls when the light will flash on and off.

Why is my turn signal relay Not Flashing?

Search for Combinational Control Module on the forum. This is an electronic module in the engine bay that among other things, controls the indicator signals. It could be a faulty module, or sticking relay on that module, or bad contacts in the connector, or even the switch in the signal stalk.

Where do I find the turn signal relay?

Locate the turn signal relay. This should also be in your owner’s manual. If it’s not, you can consult a service manual for your car. Once you can see your relays, remove the old turn signal flasher relay and replace it with the new one. Don’t worry about installing it incorrectly, it will only go in one way, the right way.

Why are the turn signals on my car not working?

This will cause the turn signals to not work. It might seem weird, but a bad circuit that deals with another system in your car could affect the turn signals electrical system as well. The electrical system needs to work for the turn signals to work. If one is unplugged or cracked then the entire system won’t work.

How to check and replace a turn signal Flasher?

1 Locate your relay cluster. You can find this in your car’s owner’s manual. 2 Locate the turn signal relay. This should also be in your owner’s manual. If it’s not, you can consult a service manual for your car. 3 Once you can see your relays, remove the old turn signal flasher relay and replace it with the new one.