What size tires fit a 2004 Jeep Liberty?

What size tires fit a 2004 Jeep Liberty?

Jeep Liberty 2004 2.4i

Tire Rim
215/75R16 7Jx16 ET31.75 OE
225/75R16 104S 7Jx16 ET41.3 OE
235/70SR16 7JJx16 ET41.3 OE
235/65HR17 7JJx17 ET41.3

What does KJ mean on Jeep?

Jeep Liberty
KJ = Jeep Liberty (2002-2007)

How do you retrain a tire sensor on a 2004 Jeep Liberty?

2002-2004 Grand Cherokee, 2004 Liberty

  1. Retrieve Re-learn Magnet, Special Tool 8821.
  2. Press MENU Button on EVIC until “RETRAIN TIRE SENSORS – NO” is displayed.
  3. Press STEP button to select “YES”.

What is the lug pattern on a 2004 Jeep Liberty?

The 2004 Jeep Liberty bolt pattern iS5 X114. 3 mm.

How do you reset the tire pressure sensor on a Jeep Liberty?

Depress the TPMS reset button located below the steering wheel until it blinks three times. Turn the ignition off and remove the key. Start the engine and let it run for 20 minutes while the system records the new pressure of each tire.

What kind of noise does a Jeep Liberty make?

About two months after the last replacement, we began hearing a relatively high-pitched whistle coming from the right side of the windshield or passenger door area. It is very hard to localize and sounds a lot like a one-note harmonica. It only happens above about 65 mph and is worse on hot days than cool ones.

What kind of engine does Jeep Liberty have?

’02 Liberty with 90K running 5W-30 fully synthetic. Starter catches fine and starts right up, but any outside temp below about 40F and it sounds like a jet engine winding up or a wild cat with its tail in a fan under the hood. Only does this on cold starts and it goes away after about a block.

What to do when your Jeep Liberty whistles?

– apply masking tape over the windshield joint and you progressively remove it until the noise comes back. Once an area is defined pour alcohol (from outside) along the joint. This should momentarily fill the crack and help locate the problem by stopping the whistle. Wax is later applied around that region. Alcohol also cleaned the surfaces.