How to replace the front door panel on a Jeep Liberty?
Pull the OEM speaker out of the inner door panel and disconnect the power plug by pressing the release tab. The OEM front and rear door speakers of a 2008 to 2012 Jeep Liberty can be replaced with either 5 1/4″ (5.25″), 6 1/2″ (6.5″) or 6 3/4″ (6.75″) aftermarket speakers. A mounting bracket may be needed depending on the new speakers you choose.
How do you remove power window on Jeep Liberty?
To remove the power window motor, you’ll need a Torx T30 screwdriver. The first step is to pry off the door handle trim piece using a flathead screwdriver. Insert the blade of the screwdriver at the front of the trim piece and gently peel it off towards the rear. Behind the trim piece on this 2012 Liberty there is a 10mm bolt.
How big are the speakers on a Jeep Liberty?
The OEM front and rear door speakers of a 2008 to 2012 Jeep Liberty can be replaced with either 5 1/4″ (5.25″), 6 1/2″ (6.5″) or 6 3/4″ (6.75″) aftermarket speakers. A mounting bracket may be needed depending on the new speakers you choose.
What kind of tool do you need to remove a door panel?
The tools needed to remove the door panel include a flathead screwdriver, a Phillips head screwdriver, and a 10mm socket with a 1/4″ drive ratchet. To remove the speaker, you’ll need a Torx T20 star bit screwdriver. To remove the power window motor, you’ll need a Torx T30 screwdriver.
How do you remove the door trim on a Jeep Liberty?
The first step is to pry off the door handle trim piece using a flathead screwdriver. Insert the blade of the screwdriver at the front of the trim piece and gently peel it off towards the rear. Behind the trim piece on this 2012 Liberty there is a 10mm bolt.
The OEM front and rear door speakers of a 2008 to 2012 Jeep Liberty can be replaced with either 5 1/4″ (5.25″), 6 1/2″ (6.5″) or 6 3/4″ (6.75″) aftermarket speakers. A mounting bracket may be needed depending on the new speakers you choose.
The tools needed to remove the door panel include a flathead screwdriver, a Phillips head screwdriver, and a 10mm socket with a 1/4″ drive ratchet. To remove the speaker, you’ll need a Torx T20 star bit screwdriver. To remove the power window motor, you’ll need a Torx T30 screwdriver.
Pull the OEM speaker out of the inner door panel and disconnect the power plug by pressing the release tab. The OEM front and rear door speakers of a 2008 to 2012 Jeep Liberty can be replaced with either 5 1/4″ (5.25″), 6 1/2″ (6.5″) or 6 3/4″ (6.75″) aftermarket speakers. A mounting bracket may be needed depending on the new speakers you choose.
To remove the power window motor, you’ll need a Torx T30 screwdriver. The first step is to pry off the door handle trim piece using a flathead screwdriver. Insert the blade of the screwdriver at the front of the trim piece and gently peel it off towards the rear. Behind the trim piece on this 2012 Liberty there is a 10mm bolt.
Are there any manuals for the Jeep Liberty?
In the table below you can see 0 Liberty Workshop Manuals,0 Liberty Owners Manuals and 10 Miscellaneous Jeep Liberty downloads. Our most popular manual is the 1997-2005–Jeep–Liberty 4WD–6 Cylinders K 3.7L MFI SOHC–32871402 . This (like all of our manuals) is available to download for free in PDF format.
How to change an axle on a Jeep Liberty?
Try to be easy on the axle seal and pull the axle straight out and not at an angle. -Once the old one is out you can toss the new one right in its place. -Put the ball joints, sway bar link, and strut bolt back together.
Can you replace the PCM on a 2007 Jeep Liberty?
When you’re searching for a replacement PCM, it’s important to keep in mind that PCMs are programmed for a specific make and model of vehicle. If you drive a 2007 Jeep Liberty with a 3.7-liter V6, you can’t use just any PCM. You can’t use just any Jeep PCM replacement.
Try to be easy on the axle seal and pull the axle straight out and not at an angle. -Once the old one is out you can toss the new one right in its place. -Put the ball joints, sway bar link, and strut bolt back together.
What happens when you remove the clevis fork on a Jeep Liberty?
Essentially once the clevis fork is removed all that does is take pressure off the lower control arm. Putting it back together doesn’t change any of the geometry – if it does the adjustment cams would have to be loose. Remember, the front of a Liberty doesn’t contain struts – they are simply coilover shocks.
How to change an axle on a jeep kJ?
Try to be easy on the axle seal and pull the axle straight out and not at an angle. -Once the old one is out you can toss the new one right in its place. -Put the ball joints, sway bar link, and strut bolt back together. -Return the old axle for your core money, and return the socket for that money back.
How do you remove the door handle on a Jeep Cherokee?
On some older vehicles the cranks are held on with a small allen head screw. If you have a door lock knob you might need to take that off, they usually are threaded and unscrew. On the 95 Cherokee in particular you’ll need to pull the door handle area out and to the right just a little bit.
What’s the best way to remove a door panel?
Use the door panel removal tool or a flat blade screwdriver to remove the “Christmas tree” fasteners from the back of the door panel. Grab the door panel firmly and lift up and away from the vehicle.
Are there rust repair panels on a Jeep Liberty?
Our Jeep Liberty repair panels include rocker panels, lower door skins and more. We also have Jeep Liberty carpeting and floor mats. you own a Jeep Liberty model between the years of 2002 and 2007, Raybuck Auto Body Parts offers rust repair panels for your specific vehicle.
What kind of body panels do I need for my Jeep Liberty?
Raybuck has a selection of Jeep body repair panels and body parts for your 2002-2007 Jeep Liberty. Our Jeep Liberty repair panels include rocker panels, lower door skins and more.
What’s the problem with the Jeep Liberty rear window?
For 2002-2006 Jeep Liberty Rear Window. The power windows in the Jeep Liberty are notorious for breaking in this manner. The problem is the design of the mechanism used to move the window. The Liberty uses a plastic window bracket that rides inside of a metal track in the door.
Where is the window regulator on a Jeep Liberty?
Part number SP13001 is for the right rear door and part number SP13002 is for the left rear door. This kit was designed to repair the power window regulator. Manual windows were available in the Liberty, but this kit will not work on a manual window regulator. Which door is right and which is left?
Is there a repair kit for a Jeep Liberty?
This repair kit fits the 2002-2005 Jeep Liberty,and it will also work on a 2006 Liberty as long as it was built prior to March 16, 2006. If you have a 2006 Liberty, you will need to know its build date in order to tell if this kit will work for you.
When to remove the door panels on a Jeep Liberty?
This automotive “how-to” guide was specifically written to assist owners of the 2nd generation 2008, 2009, 2010, 2011 & 2012 Jeep Liberty in removing the interior door panels in order to upgrade the OEM speaker, add soundproofing material, or replace the power window motor.
On some older vehicles the cranks are held on with a small allen head screw. If you have a door lock knob you might need to take that off, they usually are threaded and unscrew. On the 95 Cherokee in particular you’ll need to pull the door handle area out and to the right just a little bit.
Use the door panel removal tool or a flat blade screwdriver to remove the “Christmas tree” fasteners from the back of the door panel. Grab the door panel firmly and lift up and away from the vehicle.