What is transfer case oil?
Transfer case fluid is either synthetic or traditional gear oil, but like many vehicles, certain vehicles need certain types of transfer case fluids. It removes heat and lubricates the internal parts in the transfer case, keeping its gears cool and turning smoothly.
How to check the oil on a differential and transfer case?
Just remove the fill plug and stick your finger on it to make sure the oil level is near the top of the hole. Use gear oil in the differential and automatic transmission fluid in the transfer case. Loading…
How often do you need to replace transfer case fluid?
Transfer case fluid needs to be replaced at least after every 30,000 miles. You will need to schedule your vehicle maintenance and any time the transfer case is inspected, you will have to check the transfer case fluid. Common symptoms that you need to replace the transfer case fluid Car unable to change gears
What does lubricant fluid do in a transfer case?
In vehicles which are all-wheel drive, the transfer case is the one which helps to shift the power from one axle to the next depending on the condition of the traction. In the transfer case, lubricant fluid helps to be able to keep its gear cool and turning smoothly.
Just remove the fill plug and stick your finger on it to make sure the oil level is near the top of the hole. Use gear oil in the differential and automatic transmission fluid in the transfer case. Loading…
When to replace transfer case oil and fluid?
If your vehicle is a Ford F150, the Ford manufacturer recommends replacing the transfer case fluid after 60,000 miles. The difference is due to the fact of the way the transfer case is mounted on the two-vehicle types.
How to check and refill a transfer case?
Allow any excess fluid to drain back out of the fill hole. Apply a coat of sealant to the threads of the fill plug and install it in the transfer case fill hole, then torque it to 13 foot-pounds. Wipe any spilled fluid from the transfer case with your shop rag.
How to check a transfer case in a Chevy?
Wipe any spilled fluid from the transfer case with your shop rag. If applicable, install the transfer case shield and torque the fasteners to 15 foot-pounds. Lower the truck to the ground. Test run the truck and check the transfer case for leaks.