Where is the OBD port on a 2004 Jeep Grand Cherokee?
OBD connector location for Jeep Grand Cherokee WJ (1998 – 2005)
- The OBD socket is located under the steering wheel on the left.
- The OBD2 plug is above the hood lever.
- Here is the OBD2 diagnostic port.
What does the Check Engine light on a Jeep Grand Cherokee mean?
Once a Jeep Grand Cherokee’s check engine light illuminates, it means the On-Board Diagnostic system has repeatedly detected an engine malfunction.
When does a Jeep Grand Cherokee leak OBDII code?
When there is a large leak in the Jeep Grand Cherokee’s EVAP system, it will throw the P0455 OBDII Code. P0455 code will typically not be accompanied by any noticeable symptoms other than the smell of gas and the service engine soon light. You may notice the slightest dip in fuel economy as well.
Where to find check engine light codes on Jeep?
These are listed in numerical order for easy searching. When retrieving Jeep check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located near the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
Where is the diagnostic outlet on a Jeep Grand Cherokee?
Open the driver’s side door and plug your OBD-II scanner’s cable into the Grand Cherokee’s diagnostic outlet. This Data Link Connection will be located on the driver’s sidde of the Jeep, beneath the steering wheel, somewhere between the left kick a panel and the gas pedal.
Once a Jeep Grand Cherokee’s check engine light illuminates, it means the On-Board Diagnostic system has repeatedly detected an engine malfunction.
When there is a large leak in the Jeep Grand Cherokee’s EVAP system, it will throw the P0455 OBDII Code. P0455 code will typically not be accompanied by any noticeable symptoms other than the smell of gas and the service engine soon light. You may notice the slightest dip in fuel economy as well.
These are listed in numerical order for easy searching. When retrieving Jeep check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located near the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
What’s the Flash code on a Jeep Grand Cherokee?
The codes themselves are two digits. The first number will flash. There will then be a pause before the second number flashes. For instance, code 41 will be represented by four flashes, a pause, and then one pause. Look up the Chrysler’s flash codes online (See References).