Why do the dome lights come on on my Jeep Liberty?
The dome lights on my 2002 Jeep Liberty come on intermittently (with absolutely no activation). They may flash numerous times, stay on for a couple of minutes, etc. Eventually they will go off. There is no obvious reason for anything activating the lights…………they have a mind of their own.
Why are the headlights coming on randomly in my Jeep?
Anyone figure out what is causing headlights coming on randomly? It is like a key fob is sending a signal to lock the jeep because the turn signal light flash and the headlights stay on. Dome lights are on too.
Are there any electrical problems with the Jeep Liberty?
210-horsepower 3.7L V6 4-speed automatic 4WD, part-time w/low range TPMS sensor failed, dash warning light on. Replaced sensor. Blower control resistor failed. Replaced. Rear wiper doesn’t always immediately stop when lever is turned to “off” position. Dealership could not replicate problem, or fix it.
Why is my brake light not working on my Jeep Liberty?
TIPM was replaced 7 months ago but exhibit no symptoms during diagnostic. Brake switch failed so that brake lights stayed on and cruise control would not work. The signal will continue to flash in the last direction the signal light lever was moved to, turn or lane change mode.
Why are the lights on my Jeep not turning off?
Here is the solution – YouTube Interior lights in jeep won’t turn off. Driving me nuts. Here is the solution If playback doesn’t begin shortly, try restarting your device.
How do you turn off the lights on a Liberty?
Open and close all of the Liberty’s doors. Make sure every door is closed all the way. If the lights are still on, you may need to check to the light switch. Press the light switch on the headlamp control panel. It should be fully depressed for the lights to be off.
Where is the interior lighting fuse on a Jeep Liberty?
Open the hood and remove the cover from the underhood fuse block. Locate the fuse in slot 7. This is the interior lighting fuse. Remove the fuse from the fuse block and replace it with a new 10A fuse. Reattach the fuse box’s cover and close the hood. “2004 Jeep Liberty Owner’s Manual”; Chrysler Group LLC; 2003
The dome lights on my 2002 Jeep Liberty come on intermittently (with absolutely no activation). They may flash numerous times, stay on for a couple of minutes, etc. Eventually they will go off. There is no obvious reason for anything activating the lights…………they have a mind of their own.
Short simple answer to why Interior lights won’t turn off on my Jeep or Chrysler. No need to pull bulbs, Fuses, or disconnect the battery. Sam at ACD Auto Centre has the answer. Category Autos & Vehicles Show moreShow less Loading… AutoplayWhen autoplay is enabled, a suggested video will automatically play next. Up next
How many relays are in a Jeep Liberty?
Engine Compartment Fuse Box Diagram № A Protected Component 1 40 Blower Motor Relay 2 30 Radiator Fan (High Speed) Relay, Radiato 2 40 Radiator Fan (High Speed) Relay, Radiato 3 50 Park Lamp Relay, Daytime Running Lamp, H
Why does my car dome light keep coming on?
There is no obvious reason for anything activating the lights…………they have a mind of their own. The dealership thought the radio was the problem (because the factory radio would simply go off for no apparent reason, and then come back on by itself). After replacing the radio, the dome light problem still persists.
What does the part time light on my Jeep mean?
The light could mean a couple of things: It is possible you’ve engaged Part-Time 4WD and the light is just letting you know (it should be off if on dry pavement). Another possibility is you have a stuck transfer case indicator switch/sensor giving you a false indication light.
There is no obvious reason for anything activating the lights…………they have a mind of their own. The dealership thought the radio was the problem (because the factory radio would simply go off for no apparent reason, and then come back on by itself). After replacing the radio, the dome light problem still persists.
Why is my light jeep in 2HI mode?
It appears to be in 2Hi because I can’t move the lever any further down or forward. There’s no switch, it’s a lever on the center console. It appears to be in 2Hi because I can’t move the lever any further down or forward. Click to expand…