When was the first Jeep Quadra Trac system made?
The Borg-Warner 1305 and 1339 gear case were the original systems to carry the Quadra-Trac name. The first version used the Borg-Warner BW1339 transfer case and was produced from 1973 to 1979 and was used in the following applications.
When did the Jeep Grand Cherokee transfer case come out?
The NP219 transfer case and was produced from 1980-1982 (Jeep Wagoneer) and the NP249 was used from 1993-1995 (Grand Cherokee). The New Process system was chain driven with a viscous limited slip coupling that connected the front to the rear drive shafts. The system offered 4wd hi full-time, part-time, and 4wd low part-time.
Can a Jeep CJ-7 be a Quadra Trac?
Spotting a Quadra-trac equipped CJ-7 is pretty easy. No lockout hubs – a Quadra-trac Jeep will not have lockout hubs unless a conversion was installed. Rear axle offset – the rear axle in a Quadra-trac equipped Jeep will be offset to the passenger side.
Can a Dana 18 be installed in a Quadra Trac?
Novak makes a Dana 18 conversion kit which allows a Dana 18 to be installed in place of the Quadra-trac. This maintains the offset output and provides the Jeep a solid transfer case. Into the future.. There were many varieties of the Quadra-trac after 1980, none are covered in detail in this article.
Is the Jeep Grand Cherokee a Quadra Trac?
The NV249 introduced a low range lock that provided a hard gear connection to front and rear. The NV249 could be found in the Jeep Grand Cherokee and Jeep Cherokee. The Quadra-Trac systems were never found in any of the Jeep Wrangler models from YJ to JK or in a CJ-5.
The NP219 transfer case and was produced from 1980-1982 (Jeep Wagoneer) and the NP249 was used from 1993-1995 (Grand Cherokee). The New Process system was chain driven with a viscous limited slip coupling that connected the front to the rear drive shafts. The system offered 4wd hi full-time, part-time, and 4wd low part-time.
Novak makes a Dana 18 conversion kit which allows a Dana 18 to be installed in place of the Quadra-trac. This maintains the offset output and provides the Jeep a solid transfer case. Into the future.. There were many varieties of the Quadra-trac after 1980, none are covered in detail in this article.
How does the Quadra Trac 2 4×4 system work?
When additional traction is needed, the Quadra-Trac II ® 4×4 system kicks in to transfer torque to the axel in need. It works in part with the brake lock differential and four-wheel brake traction control systems. Features include: Four low mode locks front and rear driveshafts for low-speed power, rock crawling, and towing