Why is the bolt not coming out of my tensioner?
If it will not break loose because the tensioner wants to move, keep the tensioner from moving by holding it in place with a pry bar; then you will be able to loosen the bolt in the pulley. Though this particular bolt doesn’t usually seem to have problems, sometimes it can rust or have some other issue, causing the bolt to not come out easily.
How do you remove a bolt from a tensioner pulley?
The tensioner pulley has a smooth surface that the top of the belt — the side with no grooves — rides on. Put a socket on the bolt and turn the bolt counterclockwise to break it loose.
How does a spring loaded tensioner pulley work?
The tensioner pulley is on the end of a spring-loaded tensioner. The accessory drive belt rides on the pulley while the spring-loaded portion of the assembly puts tension on the accessory drive belt to keep it tight enough so that it doesn’t slip on the rest of the pulleys.
Why is my pulley bolt not coming out?
Though this particular bolt doesn’t usually seem to have problems, sometimes it can rust or have some other issue, causing the bolt to not come out easily. If this is the case, spray it with lubricant and allow it to set for a few minutes to give the lubricant time to work down the threads of the bolt.
What happens if you over tighten shock bolts?
Don’t over-tighten your shock bolts! If you tighten the shock bolts to even a fraction of that, your shocks will become locked into a bind, and won’t be able to pivot on the bolts. The way these shocks are designed to work is with a snug, but un-tightened bolt tension.
What happens when a bolt loosens on a lock?
However, this also makes them vulnerable to self-loosening and loss of preload. Depending on the application, bolt loosening can have profound consequences. One loose bolt can bring a whole production plant to a standstill and cost a company thousands, while in other applications loose bolts can pose a significant safety hazard.