When do I need to reset the airbag light?
The airbag light reset depends on the airbag faults. If there are minor codes such as a wiring fault or communication issue, this can usually be fixed by addressing the fault. An OBD scan tool can also erase any soft codes that are not related to a crash.
What happens if the air bag light is on?
In addition, BMW factory documentation seems to indicated that the airbag system will still work if the airbag light is on, and there are only minor faults observed. I will quote from BMW factory documents: 72 01 93 (2137) – “The [airbag] Watchdog subsystem has the ability to disable the Output Stage in the event of certain faults.”
How long does it take to reset SRS airbag module?
You are now able to re-use your existing airbag module with our reset service! Your module will be restored back to its factory condition and will not require any additional programming. Just Plug & Play! This service is 100% compatible with our seat belt repairs. Your module will be reset and shipped back to you within 24 hours of receiving!
Where is the reset button on an airport base station?
Before resetting your base station, it’s best to make sure that its firmware is up to date, if possible. Locate the reset button on the base station, next to the ports. When instructed to do so, press this button with a pen or straightened paperclip. Make sure that the base station is connected to power.
Do you need to reset the airbag light?
When working on the electrical components in your dash, you may find you will also need to reset the airbag light once it is all put back together. Many people who try to do their own work, like putting in a car radio, will sometimes neglect to plug in all of the airbag components. This will cause the airbag light to blink.
When does the airbag light turn on without a scanner?
Some cars have a “passenger seat Airbag on/off button.” This is the first airbag light you should check when you want to remove the airbag light without a scanner. If the light is functioning well, it should turn on when someone occupies the passenger seat.
How long does it take for airbag light to stop flashing?
Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset.
What to do if your airbag is not working?
Check your airbag clock spring (especially if you have a faulty horn). Some airbag issues need professional hands to resolve. If you think your car is faulty and the above sensors seem to work fine, consult your mechanic/dealer. Otherwise, I wish you all the best as you try this simple DIY.