What to do if your cooker hood has no fuse?
If there is a FCU and the fuse is ok, then you should call a qualified electrician to test the circuit breaker and circuit cabling.
Why did the hood of my cooker go off?
The cooker hood went off in the characteristic way of a fuse blowing. However, there doesn’t seem to be any fuse connected to it.
Where do you check to see if a fuse is OK?
In which case, you need to start checking back along the cabling. Look first for a FCU – might be hidden in or above a kitchen cupboard. If you find one, test the fuse. If there is a FCU and the fuse is ok, then you should call a qualified electrician to test the circuit breaker and circuit cabling.
Why is my gas gauge not working at high fuel level?
Some systems are wired so that high fuel level contacts the low-resistance section, gradually increasing resistance as fuel level drops. The system thus outputs higher voltage at high fuel level, gradually dropping voltage as fuel level drops.
What to do if your fuel pump won’t start?
Use a circuit tester to check all the electrical connections to the fuel pump. Turn the key to ON. If you see a current, then it is not the pump. If there is no current, check the fuse.
What happens to the gas gauge when the circuit is shorted?
If the internal circuit is faulty, the gas gauge may only function in one section, such as between HALF and FULL or between EMPTY and HALF. If the internal circuits are shorted, they may peg to FULL or EMPTY. If the circuit is open, the gas gauge will likely sit at EMPTY and never move.
What causes interior lights to not come on when opening driver door?
Interior lights may not come on when driver door is opened. Cause:*Driver door module (master switch assembly) is not communicating. Fix:*First, disconnect the battery for 10 minutes, then reconnect and retest for normal operation. This may ‘unlock’ the driver door module. If unsuccessful, inspect the wiring going from the driver door to the body.