What does p0351 stand for in electrical category?
P0351 – Ignition coil A, primary/secondary -circuit malfunction Trouble Code Fault Location Probable Cause P0351 Ignition coil A, primary/secondary -circ Wiring, ignition coil, ECM
What causes a p0351 code on a cop?
Potential causes of a P0351 code include: Short to voltage or ground on COP driver circuit Loose connection at coil or broken connector locks Is the engine misfiring presently? If not, the problem is likely intermittent. Try wiggle testing the wiring at the #1 coil and along the wiring harness to the PCM.
Can a p035x code be an ignition misfire?
In addition to an illuminated check engine light, the most common symptom is an ignition misfire. Often, P035x codes will also be accompanied by a misfire code (P0300-P0308). How do you troubleshoot code P0351 ?
What are the symptoms of a p0351 DTC?
Symptoms of a P0351 DTC may include: MIL (Malfunction indicator lamp) illumination Engine misfire may be present or intermittent Potential causes of a P0351 code include: Short to voltage or ground on COP driver circuit Loose connection at coil or broken connector locks
What causes a p0351 code on an ignition coil?
Potential causes of a P0351 code include: Short to voltage or ground on COP driver circuit. Open on COP driver circuit. Loose connection at coil or broken connector locks. Bad Coil (COP) Faulty Powertrain Control Module.
When does the PCM set the ignition coil code?
Since the secondary winding contains many more turns of wire, output voltage is increased to thousands of volts. This is enough to fire the spark plugs. The PCM sets an ignition coil control circuit code P0351-P0358 when it detects a problem with the ignition coil circuit.
What does the p0351 code on the ignition coil mean?
What the P0351 code means. The P0351 DTC is seen when the ignition coil A primary or secondary circuit has a malfunction. The engine control module is looking for specific signals from the ignition coil A and when these signals are not seen the ECU sets the Check Engine Light.
When to look for the p0351 DTC code?
The P0351 DTC is seen when the ignition coil A primary or secondary circuit has a malfunction. The engine control module is looking for specific signals from the ignition coil A and when these signals are not seen the ECU sets the Check Engine Light.
What is the diagnostic code for ignition coil a?
P0351 code definition. P0351 is a general OBD2 diagnostic trouble code (DTC) that points to a fault with the ignition coil A.
How to check primary circuit resistance on ignition coil?
Attach one lead of your multimeter to each terminal on the coil and set the meter to read ohms. This tests the coil primary circuit; typical readings should be 0.4 to 2 ohms. Consult the manufacturer’s repair information for the exact specifications. Next, check the secondary circuit resistance.