Do You need Code clearing for ABS system?
Be observant when first driving the vehicle after repairing the ABS system. Listen for abnormal noises or performance issues that could indicate a problem which will need further inspection. No code clearing is required in most cases for American built vehicles.
What are the codes for an ABS warning light?
If after testing the sensor or if you have scanned the ABS computer and get a trouble code C0035, C0040, C0041, C0045, C0046, C0050, C0051, C1221, C1222, C1223, C1224, C1225, C1226, C1227, C1228 , C1232, C1233, C1234 or C1235 the sensor is either unplugged or it has shorted out and needs replacement.
How does an ABS system reduce the risk of an accident?
Research has proven that a vehicle with an ABS system can decrease the risk of a vehicle accident by 18 percent by controlling the rotational speed of each wheel. Located near the wheel, a wheel speed sensor is used to control the rotational speed of the wheel.
Where are the short pins on the OBD?
Short pins 4 and 9 on the OBD connector located under the dash on the driver side. I used a paper clip, but any stiff (solid) light gauge wire will do. Click on the photo below right to expand and you can see the pin numbers marked in the plastic.
What does service ABS / TCS, suspension message mean?
GM Service ABS / TCS / Power Steering and/or Suspension Message DTC U0077 U0121 U0126 U0131 U0139 U0151 U0401 U0415 U0428 (Circuit 5986). – Service ABS and/or Traction Control Lights or message on. – Service Power Steering System warning on if equipped with electric power steering.
If after testing the sensor or if you have scanned the ABS computer and get a trouble code C0035, C0040, C0041, C0045, C0046, C0050, C0051, C1221, C1222, C1223, C1224, C1225, C1226, C1227, C1228 , C1232, C1233, C1234 or C1235 the sensor is either unplugged or it has shorted out and needs replacement.
Be observant when first driving the vehicle after repairing the ABS system. Listen for abnormal noises or performance issues that could indicate a problem which will need further inspection. No code clearing is required in most cases for American built vehicles.
What does service power steering system warning mean?
– Service Power Steering System warning on if equipped with electric power steering. – Service Suspension System, if equipped with RPO Z95. – Backup reverse camera is inoperative. – Backup camera grid or guidance lines missing or inoperative. – Vehicle Settings icon grayed out in the driver information center.
Why does my abs light keep coming on after I Turn Off the key?
If the ABS system stays on after the key is turned off which is indicated by a humming noise or you have scanned the system and one of the valve control coils has burned out the unit needs to be replaced. The wheel speed sensor works in conjunction with the sensor to monitor the speed of rotation of the wheel.
What happens if a fuse blows on an ABS system?
The abs system is like any other electrical system and is protected by a fuse that can blow if an electrical surge occurs or if the fuse ages. If the fuse is blown and you replace it and it blows again there is a short circuit in the system which is usually the ABS computer or pump motor.