What happens if the ASD relay goes out?
So, If any of the circuits that the (ASD) relay provides power for go out; as a result of a bad (ASD) relay; then it may affect other circuits, one of them being the starting circuit. A bad (ASD) relay can indirectly, and sometimes directly, cause a starting circuit to not have power; which will result in a no crank condition when you turn the key.
Where does terminal 30 connect to the ASD relay?
The rest of the circuit is not being supplied with power. When the fuel pump and automatic shutdown relay are powered by the powertrain control module (PCM), terminal number 30 connects to terminal 87 in an on position. Voltage is being supplied to the remaining part of the circuit by terminal number 87.
What does the Check Engine light on an ASD relay mean?
Another symptom of a possible problem with the (ASD) relay is an illuminated Check Engine Light. So, If the computer detects that a problem with the (ASD) relay or circuit has occurred; it will illuminate the Check Engine Light to alert the driver of a problem. The Check Engine Light can also be activated for a wide variety of other reasons.
How does the Power Control Module control the ASD relay?
The power control module controls the function of the circuit within the ASD relay, which means that when the power control module switches the circuit On or Off, it simultaneously starts or stops the automatic shutdown relay operation.
What does it mean when the ASD relay shuts down?
ASD relay closes for 2 seconds, but you discover no 12vdc at coil + or injector 12vdc power is dead (during said 2 seconds), or (0v) cranking. – This means the ASD relay is bad. (bad contacts, replace it) ASD relay closes, but I have no spark to any cylinders. – So is bad Ignition coil, or crank /cam sensors or bad ignitor module.
What causes a jeep ASD relay to stop working?
Can be 50 causes, but in macro form is, bad engine bad spark plugs and wires, bad fueling, which can be flooding or lost fuel pressure (stavation) Stalls for bad engine are lost compression hot. Some engine can do that, even stuck open head valves now or only HOT. (and many more issues inside the actual engine)
How does the automatic shut down relay work?
The Automatic Shutdown (ASD) relay controls the power supplied to the fuel injectors, ignition coil, oxygen sensor heater elements, and other parts of the power module. The ASD relay shuts down the fuel ignition and the fuel pressure immediately after the ignition key is turned off; this is done to prevent problems like fire, dieseling, etc.
The rest of the circuit is not being supplied with power. When the fuel pump and automatic shutdown relay are powered by the powertrain control module (PCM), terminal number 30 connects to terminal 87 in an on position. Voltage is being supplied to the remaining part of the circuit by terminal number 87.