When does the automatic shutdown relay kick off?
When the vehicle’s engine is immediately up and running; the automatic shutdown relay kicks-off too, supplying a switched power of 12+ volts to the ignition coil and fuel injector s; this helps to allow the smooth operation of the engine system.
How do I reset the fuel pump shut off switch?
Push the button on the inertial switch; it should be clearly marked as the fuel pump reset, and may be in a contrasting color to the case. You may need to turn the ignition key to the on or accessory position to energize the module and reset the switch. Proceed to the next step if your inertia switch doesn’t use an external button.
How can I reset the fuel cut off?
This is similar to an electrical circuit breaker in your home which can be easily reset by pushing the button or pulling the leverage down. All modern fuel injection cars are equipped with an inertial fuel cut off switch that shuts off the power supply for the fuel pump if the vehicle is in a collision.
How long does it take to reset adaptive shifting?
This procedure will reset the adaptive shifting points in your Mercedes-Benz automatic Transmission Control Unit (TCU). These simple do it yourself instructions take less than 5 minutes.
How does the automatic shut down relay work?
The Automatic Shutdown (ASD) relay controls the power supplied to the fuel injectors, ignition coil, oxygen sensor heater elements, and other parts of the power module. The ASD relay shuts down the fuel ignition and the fuel pressure immediately after the ignition key is turned off; this is done to prevent problems like fire, dieseling, etc.
How do I restart my computer after auto shutdown?
a) Open Control Panel and navigate to System and Security. b) Under System and Security, click on System link. c) In the system information, on the left side click on the “ Advanced System Settings ” link. d) In the advanced system settings window, click on the startup and recovery options.
Push the button on the inertial switch; it should be clearly marked as the fuel pump reset, and may be in a contrasting color to the case. You may need to turn the ignition key to the on or accessory position to energize the module and reset the switch. Proceed to the next step if your inertia switch doesn’t use an external button.
How to reset the auto power window function?
1 Turn the key to the accessory or on position. This will allow you to get started, making sure power goes to your windows. 2 Make sure the windows are completely closed. Close the windows so you can reset the automatic function. 3 Roll the window completely down. 4 Roll the window completely up. 5 Test the auto power window function.