How do you change the motor on a Dodge Ram?
Use a ratchet with T45 Torx bit to remove the three (or four depending on your Ram model year) bolts securing the motor to the transfer case. Unplug the wire harness connector. Place a drain pan underneath the motor, and pull off the motor from the transfer case. A small amount of fluid will come out. Figure 2. Location of the transfer case motor.
Where is the transfer case motor on a Dodge Ram?
Follow the rear drive shaft to where it meets the transfer case, and to the left of the drive shaft you will see an electric motor with a wire harness connector attached to it. Use a ratchet with T45 Torx bit to remove the three (or four depending on your Ram model year) bolts securing the motor to the transfer case.
Where is the electric shift motor on a Dodge Ram?
The electric shift motor is mounted on the side of the transfer case and you can hear it when it is operating from outside the vehicle. The shifting into neutral was a common problem with 04-05 Rams and Jeeps with electric shift transfer cases.
What happens if the transfer case motor wears out?
In your 4WD truck there is a small but significant motor that allows the transfer case to operate, and this electric motor is controlled via the electronic 4WD module inside of the cabin. If the motor gets jammed, wears out, or gets damaged on the terrain, the transfer case will fail to switch from 2WD to any of the 4WD traction modes.
Can you replace the transfer case shift motor?
Luckily, the transfer case shift motor is fairly easy to access and replacing it is within the reach of the do-it-yourselfer. You may have to remove the front driveshaft in order to access the shift motor. In order to remove the shift motor and install the new one, you’ll need to get the transfer case shifted into its neutral position.
What is the transfer case motor in a 4 wheel drive car?
The transfer case shift motor is a part of some vehicle’s four-wheel drive (4WD) system and is responsible for switching between the vehicle’s different two and four-wheel drive options. Four-wheel drive (also known as 4WD or 4-wheel drive) systems allow the engine to drive all four wheels…
What causes a transfer case motor to fail?
The transfer case shift motor can fail for a number of reasons. Due to its location underneath the body of the vehicle, it can suffer corrosion from road salt or dirt (especially if you take the vehicle off road frequently). The motor can also get damaged from road debris, as well as simply wear out and over time.
Why is my transfer case not working on my 4×4?
If your 4×4 vehicle’s transfer case motor is not functioning, then you may not be able to shift into or out of 4WD, which could be a big problem. Therefore, getting it replaced quickly is vital. If you are having problems with your 4WD not engaging because of a defective shift motor, then you have come to the right place!