How do you close the sunroof on a Cherokee SRT8?
1. Place the ignition switch in RUN position. 2. Close all of the doors. 3. Press and release the vent switch (sunroof should move to vent position). 4. Once the sunroof has stopped motion at the vent position, press and hold the vent switch for at least 5 seconds to recalibrate the sunroof position.
What do you think of the 2008 Jeep Grand Cherokee?
2008 Jeep Grand Cherokee I love my vehicle. It is the first Jeep that I have ever owned and glad that I took the leap to purchase it. It is a small SUV perfect for a family of four. Open trunk space with seats that can be folded down so that you can transport and move things if needed.
How do you reset the sunroof on a jeep?
With ignition in on position, press and hold the open button on the glass for about 5 seconds. Then release and see if it the glass will express open. If so, do the same for the visor. This also works for the power windows. You probably just need to do a reset on the glass and visor buttons.
Why is my sunroof not closing flush with the roof?
Recently, I noticed that my sunroof was not closing flush with the roof but was otherwise working properly. Not by much, but there was enough room for water to get past the seal. I took the rig to the dealership. They charged me $110 to diagnose.
1. Place the ignition switch in RUN position. 2. Close all of the doors. 3. Press and release the vent switch (sunroof should move to vent position). 4. Once the sunroof has stopped motion at the vent position, press and hold the vent switch for at least 5 seconds to recalibrate the sunroof position.
How do you change the sunroof on a jeep?
The sunroof sliding glass panel will move to the hard stop and then back to the tilt (VENT) position. Release the CLOSE push button of the sunroof switch, then depress and hold the CLOSE push button again within 5 seconds.
How does the sunroof switch open and close?
As the CLOSE push button of the sunroof switch is held, the sunroof sliding glass panel will move to the fully closed position, then to the fully opened position and then fully closed again. Initialization is complete. Release the sunroof switch push button. Click to expand… You helped me so much.
Recently, I noticed that my sunroof was not closing flush with the roof but was otherwise working properly. Not by much, but there was enough room for water to get past the seal. I took the rig to the dealership. They charged me $110 to diagnose.
Why does my sunroof not close all the way?
Sunroof not closing all the way…simply needs a reset. The reset worked like a charm and saved at least the $100 for the dealer to look at it. 1. Place the ignition switch in RUN position.
How much does it cost to fix a sunroof that wont close?
How much it costs to fix a sunroof that will not close depends entirely on the severity of the problem as well as how you decide to tackle it. If you need to replace the sunroof glass then you are looking at a price of between $300-$400, and a process taking a couple of hours.
What do I need to fix my sunroof?
The basic things that you will need to fix the sunroof are a multimeter and a screwdriver. You will have to access the lift arms. For this, you will have to remove the glass from the sunroof. The guide lifting the arms need pushing forward if they are not closing all the way.
Why is my sunroof not working on my Jeep?
I tried to use my sunroof on my ’14 Limited Saturday and noticed that the vent button and auto open and close are not working. Hitting the vent button now does nothing and pushing the close or open only open the sunroof incrementally, I have to keep pushing the buttons repeatedly to get it to close or open. Has this happened to anyone else?
What to do when the sunroof does not close all the way?
Press and release the vent switch (sunroof should move to vent position). 4. Once the sunroof has stopped motion at the vent position, press and hold the vent switch for at least 5 seconds to recalibrate the sunroof position. vent switch for at least 5 seconds to recalibrate the sunroof position. 5.
How does the sunroof switch work on a jeep?
As the CLOSE push button of the sunroof switch is held, the sunroof sliding glass panel will move to the fully closed position, then to the fully opened position and then fully closed again. Initialization is complete. Release the sunroof switch push button. I had this happen a couple times, actually.
I tried to use my sunroof on my ’14 Limited Saturday and noticed that the vent button and auto open and close are not working. Hitting the vent button now does nothing and pushing the close or open only open the sunroof incrementally, I have to keep pushing the buttons repeatedly to get it to close or open. Has this happened to anyone else?
As the CLOSE push button of the sunroof switch is held, the sunroof sliding glass panel will move to the fully closed position, then to the fully opened position and then fully closed again. Initialization is complete. Release the sunroof switch push button. I had this happen a couple times, actually.
Press and release the vent switch (sunroof should move to vent position). 4. Once the sunroof has stopped motion at the vent position, press and hold the vent switch for at least 5 seconds to recalibrate the sunroof position. vent switch for at least 5 seconds to recalibrate the sunroof position. 5.