What is the transmission code on a Jeep Grand Cherokee?
In the case of the P0700, it is a general code. This means that it should be accompanied by some other code that should tell you the specific problem. It is a OBDII code and not just a Jeep specific code. It is possible to get the P0700 code without any other code registering with your Jeep Grand Cherokee.
How can I reset the fault code on my Jeep Cherokee?
The Jeep Cherokee’s engine includes a computer that monitors several sensors. If a sensor reports a problem, the computer will display the check engine light on the dashboard. This tells the driver there is a problem that needs to be assessed. Once the problem is corrected, you can reset the fault codes yourself.
What to do if your Jeep Grand Cherokee transmission is not working?
Turn the ignition key until the digital odometer displays, repeat three times in succession and then back to “On” (On/Off, On/Off, On/Off, On). At the fourth “On” the odometer will be replaced with codes. If your car has a transmission electrical problem you can see P0700 or P0702 code.
Is there a way to erase error codes from a Grand Cherokee?
Scroll to the “erase codes” option displayed on the on-screen menu. Some scanners also feature an erase button option. If so, press erase. If you had to scroll to the option, press the “enter” or “send” button. Some scanners may ask if you’re sure you want to erase the codes. If so, select “yes.”
In the case of the P0700, it is a general code. This means that it should be accompanied by some other code that should tell you the specific problem. It is a OBDII code and not just a Jeep specific code. It is possible to get the P0700 code without any other code registering with your Jeep Grand Cherokee.
Can a Jeep Grand Cherokee error code be reset?
To effectively reset the error code, the problem must first be diagnosed and corrected, if applicable, to keep the MIL from re-tripping. Simply clearing engine error codes on a Jeep Grand Cherokee will not fix the underlying problem. There are two procedures to clear error codes.
What does p0700 mean on a Jeep Grand Cherokee?
It is possible to get the P0700 code without any other code registering with your Jeep Grand Cherokee. If you get no other code it means that the transmission control circuit is malfunctioning. It is typically accompanied by other codes that’ll help shed light on the situation. When P0700 registers by itself can be tricky.
What does DTC stand for on a Jeep Grand Cherokee?
Error codes or diagnostic trouble codes (DTCs) occur on vehicles when a sensor or component fails its intended function or fails to communicate to the computer. The computer then trips the malfunction indicator light (MIL) and displays a check engine symbol on the instrument panel.
What was the problem with the Jeep Grand Cherokee transmission?
Replace rear axle due to electrical wire holder breaking and allowing the cable to drag on the axle boot. Caused a grease leak and ruined the joint. The new 8 speed transmission is awesome but had an issue with hard/jerky downshifts. Dealer did a software update per TSB# 21-017-14 and it shifts perfectly now.
What are the specs for a 2004 Jeep Grand Cherokee?
(a) Must have either Trailer Tow Group or Trailer Tow Group IV. (b) Curb weight is for a base model with standard equipment. (c) Payload is the maximum allowable weight of driver, passenger (150 lbs. per person) and cargo rounded to the nearest ten pounds.
Why does my Jeep Grand Cherokee not shift gears?
For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually. The most common cause of transmission problems is the easiest to fix: check the fluid level in the transmission and restore it to the proper levels.
Is the 2004 Jeep Grand Cherokee a good car?
Read the full in-depth review of the Used 2004 Grand Cherokee at Edmunds. Edmunds’ expert review of the Used 2004 Jeep Grand Cherokee provides the latest look at trim-level features and specs, performance, safety, and comfort.
Is there a problem with my Jeep Grand Cherokee?
Very often, this will solve the problem. But Jeep Grand Cherokees seem especially prone to more serious transmission problems, and some owners are quite vexed at their inability to determine the causes.
What are the trim levels of the 2004 Jeep Grand Cherokee?
2004 Jeep Grand Cherokee models The Grand Cherokee now comes in six trim levels: Laredo, Limited, Freedom Edition, Special Edition, Overland and Columbia Edition.
When was the 2004 Jeep Grand Cherokee Laredo purchased?
Purchased on 02/28/04 and owned in CT until 04/14/21. Driven an estimated 9,408 miles/year. Last serviced at 74,502 miles 09/16/10 • Vehicle serviced. No accident or damage reported to CARFAX.
What kind of engine does a Jeep Grand Cherokee have?
We have a 2010 Jeep Grand Cherokee Limited 4X4 with the 5.7 liter V8 HEMI MDS VVT engine, and the Quadra-Trac II Active Full-Time 4WD transmission. This automatic transmission vehicle was extremely easy to shift into neutral for flat towing behind our motorhome.
Are there any problems with the Jeep Grand Cherokee?
Check out our Jeep Grand Cherokee overview to see the most problematic years, worst problems and most recently reported complaints with the Grand Cherokee.
Where is the FDCM on a Jeep Grand Cherokee?
1. Unplug your battery. 2. Unplug the fdcm (someone also just removed the FDCM fuse) 4. Drive around down your street and back 6. plug fdcm back in (or replace fuse) 8. Test it out! The FDCM is under the rear seat, drivers side. Two 18mm bolts hold the seat down. Update to my previous post.
Is the Jeep Grand Cherokee rated by Edmunds?
Read the full in-depth review of the Used 2006 Grand Cherokee at Edmunds. Edmunds’ expert review of the Used 2006 Jeep Grand Cherokee provides the latest look at trim-level features and specs, performance, safety, and comfort.
What are the trim levels of the Jeep Grand Cherokee?
Overall, the 2006 Jeep Grand Cherokee offers more luxury and comfort than ever before, while maintaining the rugged character that made the Jeep marque what it is today. The Jeep Grand Cherokee midsize SUV is available in three trim levels: Laredo, Limited and Overland.
When did the Jeep Grand Cherokee come out?
Jeep practically invented the sport-utility vehicle way back in the dark days of WWII, when the army needed a tough, maneuverable and lightweight vehicle capable of traversing the nastiest roads and trails on the planet. Sixty years later, Jeep is still going strong (thanks to resources from parent company DaimlerChrysler).
Even though the raucous 5.7-liter V8 provides gobs of low-end thrust, the 3.7-liter V6 and 4.7-liter V8 are smooth and provide more than enough power for most applications. Inside the Jeep Grand Cherokee, the seats are firm and supportive, and the leather looks quite contemporary.
It is possible to get the P0700 code without any other code registering with your Jeep Grand Cherokee. If you get no other code it means that the transmission control circuit is malfunctioning. It is typically accompanied by other codes that’ll help shed light on the situation. When P0700 registers by itself can be tricky.
What is the VIN number for a 1999 Jeep Grand Cherokee?
Refer to the VIN charts below for 1999 – 2004 WJ Grand Cherokees. Note: All Columbia, Freedom, Rocky Mountain and Special Edition’s use the same “Series” number as Laredo. Note: All Columbia, Freedom, Rocky Mountain and Special Edition’s use the same “Series” number as Laredo.
What to do if your Grand Cherokee computer forgets hard codes?
Disconnect the negative battery cable and leave it disconnected overnight. Reconnect the negative battery cable in the morning and all but any hard codes will be cleared. By disconnecting the battery, you are essentially giving the computer a form of amnesia, whereby the computer forgets any stored codes.
What happens when you disconnect the battery on a Grand Cherokee?
By disconnecting the battery, you are essentially giving the computer a form of amnesia, whereby the computer forgets any stored codes. However, if you have not corrected the problem that caused the code in the first place, the code will return soon and the “check engine” light will come back on.
What kind of transmission does a jeep have?
Copy and paste it, adding a note of your own, into your blog, a Web page, forums, a blog comment, your Facebook account, or anywhere that someone would find this page valuable. © Copyright 2007-2020 4-the-love-of-jeeps.com All Rights Reserved Not affiliated in any way with Chrysler/Fiat, or the Jeep division past or present.
What kind of transmission does a Jeep Grand Cherokee have?
With its standard five-speed automatic transmission and V6 engine, your Jeep Grand Cherokee is the perfect mid-size SUV for towing and hauling. Keep that engine running smoothly by regularly checking transmission fluid and visiting AutoZone for Jeep Grand Cherokee automatic transmission parts. Use the form above to tell us what you drive.
What are the signs of a faulty transmission in a jeep?
Signs of a faulty transmission include leaking transmission fluid or charred or burnt fluid that has turned black and has a smoky, burnt smell. These signs mean that it’s time for Grand Cherokee automatic transmission repair or replacement.
When did the first Jeep transmission come out?
Assuming your Jeep hasn’t had a different transmission swapped into it, here are the original factory transmissions produced since 1945 (manuals) and 1963 (automatics). There you have it! A chronological history of transmissions for Jeeps (for you history buffs out there).