What does c121c mean?
The c121c code simply means that you have already communicated with the ABS module and it has determined that something from the powertrain will inhibit the proper activity of the Traction control system. Traction control includes the control of electronic throttle to lower rpm when necessary.
What does p0344 mean on a Jeep Wrangler?
P0344 is an OBDII diagnostic code. It is a generic code, which means that it has the same meaning for the Jeep Wrangler as it would any other vehicle. If your Wrangler has this code, it means that the PCM (powertrain control module) has detected that the camshaft position circuit is sending an intermittent signal.
Why is my DTC p0344 CMP sensor not working?
Depending on year, make, and model, DTC P0344 or P0349 may have number of causes. Here are some of the most common. Faulty Sensor – If the sensor coil is open or shorted, then it will generate no signal. Poor Installation – A good CMP signal is highly dependent on placement.
What is the c121c code on a Dodge?
The C121C code has either the ABS controller module, or the powertrain controller module as failure sources. There is a specific Dodge diagnostic process requiring a code reader capable of reading powertrain Diagnostic Trouble Codes (DTCs).
What causes a p0344 to set on a Mustang GT?
Ford Trucks / Mustang GT – An alternator phase problem, such as a blown diode or open coil, may cause so much electrical interference that the CMP signal gets distorted, causing a P0344 / P0349 DTC to set, among others, in spite of there being no actual problem with the CMP sensor or wiring.
P0344 is an OBDII diagnostic code. It is a generic code, which means that it has the same meaning for the Jeep Wrangler as it would any other vehicle. If your Wrangler has this code, it means that the PCM (powertrain control module) has detected that the camshaft position circuit is sending an intermittent signal.
Is there a p0344 camshaft position sensor a circuit?
[b]2003 Dodge Ram 1500 5.7Hemi P0340 & P0344 codes [/b] I’m getting 2 codes for my truck P0340, P0344 On every thing I have read its telling me its a Cam Shaft Position Sensor problem (P0340) It also came up as (intermitton) also it came up on freeze frame it said (fuel system 1 open loop)I am r…
The C121C code has either the ABS controller module, or the powertrain controller module as failure sources. There is a specific Dodge diagnostic process requiring a code reader capable of reading powertrain Diagnostic Trouble Codes (DTCs).
What does the camshaft position sensor on a Jeep Wrangler mean?
It is a generic code, which means that it has the same meaning for the Jeep Wrangler as it would any other vehicle. If your Wrangler has this code, it means that the PCM (powertrain control module) has detected that the camshaft position circuit is sending an intermittent signal.