What kind of engine does a Pontiac Grand Am have?

A two-barrel carburetor Pontiac Grand 5.0 L V8 and four-carburetor Pontiac Grand version were used for vehicles in California due to the states stringent emission restrictions. In 1979, the two-barrel carburetor, 3.8 L V6 engine became standard in the Pontiac Grand vehicles. What are the engine specs for the third generation?

When did the second generation Pontiac Grand Am Come Out?

Pontiac Grand Ams second generation was produced from 1978 to 1980. The third generation of the Pontiac Grand Am was produced from 1985 to 2005 and was preceded by the Pontiac Phoenix. The successors to the Grand Am sedans were the Pontiac G6 cars released in 2006. What engines were offered with first generation Grand Ams?

What kind of engine do I need to replace my Oldsmobile?

Description: If your Chevy, Pontiac, Buick or Oldsmobile engine needs to be replaced, then order part #89038389. This remanufactured 3.4L V6 has a…

What do I need to replace my GM engine?

Description: If the engine in your Buick, Chevy, Pontiac or GM vehicle needs replacing, order part #19178141. This remanufactured 3.5L V6 214 cu in… More Info Description: Whether you drive a Chevrolet Impala or Monte Carlo, you know you’re getting a performance car that’s also a fun-to-drive passenger… More Info

Description: If your Chevy, Pontiac, Buick or Oldsmobile engine needs to be replaced, then order part #89038389. This remanufactured 3.4L V6 has a…

General Motors used the 3.4L engine on numerous popular vehicles, including the Pontiac Grand Am, Chevrolet Venture, Pontiac Montana, Chevy Malibu, Olds Silhouette, Oldsmobile Alero and the Buick Rendezvous, just to name a few. Unfortunately, the 3400 engine tends to leak from the lower intake manifold to the cylinder head gasket.

How do you replace an intake gasket on a Chevy?

Replace the oil pump drive o-ring, the heater hose tube o-ring and the water pump bypass tube o-ring. Place a small-block Chevy paper distributor gasket on the oil pump drive. Reinstall the oil pump drive into the block. Place the new lower intake manifold gasket into place. Reinstall the push rods and rocker arms.

How do you replace an oil pump on a Chevy?

Place a small-block Chevy paper distributor gasket on the oil pump drive. Reinstall the oil pump drive into the block. Place the new lower intake manifold gasket into place. Reinstall the push rods and rocker arms. Ensure that they are in the correct order.

When did the Pontiac Grand Am 5th generation come out?

In this article, we consider the fifth-generation Pontiac Grand Am, produced from 1999 to 2005. Here you will find fuse box diagrams of Pontiac Grand Am 1999, 2000, 2001, 2002, 2003, 2004 and 2005, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Where are the fuse blocks on a Pontiac Grand Am?

There are two fuse blocks, which are located on the right and left in the dashboard, behind the covers. How to check the fuses? How to replace a blown fuse? Why do car fuses blow?

How to check fuel pressure regulator on a Pontiac Grand Am?

Attach the vacuum hose to the port on the fuel pressure regulator. Plug in the electrical connection for the fuel pump near the fuel tank on 2.4-liter models. On 2.2-liter and V-6 models, replace the cap on the end of the fuel rail. “Haynes Repair Manual: Pontiac Grand Am 1999 thru 2004”; John H. Haynes and Jay Storer; 2005

A 170-hp, 3.4-liter V-6 engine is optional in the SE1. A 175-hp Ram Air V-6 with cold-air induction and a lower-restriction exhaust system goes into the GT and GT1 and teams only with the automatic transmission. Antilock brakes are standard on the SE2 and optional on the SE and SE1.

What’s the idle speed of a Pontiac Grand Am?

The car idles at between 1500 and 2500 RPMs and if you put it in drive and let off the brake, it’ll get up to about 40-45 mph on its own. I followed behind her on the way home and she was riding the brake practically the whole time. At first it happened every so often, put lately its been happening more and more frequently.

Why does my Grand Am engine rev high?

I have a 2003 Pontiac Grand Am 3.4 liter. Sometimes the engine starts revving high uncontrollably. It doesn’t happen all the time, but when it does happen, it does it sometimes when I start the car, or when i’m driving down the road, or when i’m sitting at a stop light.

What kind of styling does a Pontiac Grand Am have?

Five Grand Am versions are available: SE, SE1, SE2, GT and GT1. Aggressive styling has long been a Grand Am hallmark. Both the coupe and sedan feature a low nose and high tail with a pronounced wedge profile. Traditional Pontiac styling cues include ribbed body cladding and a twin-port grille.

What was the Pontiac Grand Am in 1985?

For the 1985 model year, Pontiac re-used the Grand Am name for a new compact car to replace the aging and unpopular Phoenix (based on GM’s X Body) using the new-for-1985 N Body. The Grand Am shared the same front-wheel drive platform as the Buick Somerset (renamed Skylark in 1987) and the Oldsmobile Calais.

What was the compression ratio of the Pontiac Grand Am?

Engines were also detuned to meet the 1975 emission regulations with the compression ratio dropping to a new low of 7.6 to 1 on some engines.

When did the Pontiac Grand Am stop being made?

The Pontiac Grand Am is a mid-size car and later a compact car that was produced by Pontiac. The Grand Am had two separate three-year runs in the 1970s: from 1973 to 1975, and again from 1978 to 1980. It was based on the GM A platform. Production of the Grand Am was canceled in 1980 when it was replaced by the Pontiac 6000.

Engines were also detuned to meet the 1975 emission regulations with the compression ratio dropping to a new low of 7.6 to 1 on some engines.

How much does a Pontiac Grand Am touch cost?

It sounds like it is a $700-$900cdn touch. I have about 71k on my GA and I have already replaced both the left and right wheel bearing retaining hubs. Recently over the last 2 months these lights have been coming on intermittently, generally when driving in wet weather. Any ideas?

What kind of engine does a Pontiac Quad 4 have?

A SOHC variant of the Quad 4 was intended to replace the Pontiac 2.5 L Tech IV OHV “Iron Duke” engine. Debuting in 1992, this Quad OHC was an eight-valve engine and produced 120 hp (89 kW), 40 hp (30 kW) less than the Quad 4 of the same era. Torque was 140 lb·ft (190 N·m).

When did the Quad OHC engine come out?

Torque was 140 lb·ft (190 N·m). Power dropped to 115 hp (86 kW) in 1993 with an attempt by GM to reduce the NVH of the engine. Although power and economy were better than the Tech IV, the Quad OHC was retired after 1994 when the DOHC version became standard.

What kind of engine does a Pontiac Montana have?

General Motors deployed the 3.4 liter engine in many of its U.S. built cars. Cars in the Pontiac line that used the 3.4L engine included the Pontiac Montana, Aztec, and Grand Am. Owners of Pontiacs with these engines reported on websites such as Car Complaints.com that they experienced coolant leaks and overheating problems with these engines.

What kind of engine does a Pontiac 60° have?

The 2.8 L (2,837 cc) 60° V6 was used in these vehicles: The 3.1 L (3,135 cc) 60° V6 was used in these vehicles: The LH0 (“T-code”) was introduced in 1988 on the Pontiac 6000 STE AWD. It featured a more advanced multiport fuel injection. It was produced until 1994 (1996 for the Mexican market) and was exported in some models.

What are the torque specifications for a GM 3.4L V6?

444 50.17 LQ1 – DOHC – Main Caps – 2 Steps: 37FtLbs; +75deg Type: 8 96 10.85 LQ1 – DOHC – Crankshaft Position Sensor Bolts Type: Bolt Cylinder Head To Cylinder Head 44 528 59.66 LQ1 – DOHC – Head Bolts – 2 Steps: 44FtLbs; +90deg Type: Bolt

Why is my 1994 Grand Prix V6 engine missing?

1994 Grand prix 6 cylinder engine. Car stared missing, was told it was EVAP purge solenoid. Replaced it and drove fine for short time and problem started again and again was told it was EVAP purge solenoid. Why is this happening over and over again.

How many bolts are in a GM 3.4L V6?

10.85 LQ1 – DOHC – Crankshaft Position Sensor Bolts Type: Bolt Cylinder Head To Cylinder Head 44 528 59.66 LQ1 – DOHC – Head Bolts – 2 Steps: 44FtLbs; +90deg

The base 2.4-liter four-cylinder produces 150 horsepower and now teams with either a five-speed manual or four-speed automatic transmission. V-6 models come with a 3.4-liter engine that generates 170 horsepower and are paired with automatic transmission.

Can you test a 2000 Pontiac Grand Am?

The 2000 Pontiac Grand Am has not been tested. Like what you see? Find the best deal on a Pontiac Grand Am today. There are for sale near you. Certified child passenger safety technicians conduct hands-on tests of a car’s Latch system and check the vehicle’s ability to accommodate different types of car seats.

When did the Pontiac Grand Am Le come out?

1990–1991 Pontiac Grand Am LE with the “sport performance package” (RPO: W32) The W41 was the highest-output Quad 4.

How to replace a 3.4L intake gasket on a car?

Pry on the fuel rail gently with a flat head screwdriver to remove the fuel rail and injectors from the vehicle. Remove the clamps from the coolant bypass hose. Remove the water pump bypass tubes retaining nut by the oil dipstick tube. Remove the 8 mm bolt retaining the bypass tube on top of the water pump housing.

What causes a Pontiac 3400 engine to leak?

The intake manifold gasket failed on many 3.4 L engines and caused either an internal or external leak. An internal leak will allow the oil and the coolant to mix together. An external leak allows the coolant to leak outside of the engine. The leaks occur around the intake manifold gasket. The failures are linked to DexCool, GM’s long-life coolant.

How to replace intake gaskets on GM 3400?

To replace intake gaskets what is the procedure for installing correct length push rods in the right spot and valve adjustment after taking push rods out of way to get gaskets. I am former gm tech years ago, now heavy truck. Thank you for the generous Tip / Donation. Answer:

How to replace the intake in a GM 3.1L engine?

1) Disconnect the negative cable at battery. 2) Unplug and mark 8 or 9 electrical connectors from their devices at the top firewall side of the engine. 3) Now you can remove the air cleaner duct. 4) Remove the accelerator and cruise control cables from the mounting bracket. Set off to the side.

Can you replace the lower intake manifold gaskets?

The original lower intake manifold gaskets will leak and then the gaskets must be replaced. Here’s how. This is a difficult job, so I took detailed notes and digital pictures to help.

Where is the MAP sensor on a GM 3.1L engine?

This mounts on the right rear end of the upper intake manifold by two bolts. There is a gasket. The valve will just hang there by the rigid pipe that goes to the exhaust. 8) Remove the MAP sensor (one 13mm bolt) .

What’s the warranty on a 2000 Pontiac Grand Am?

Every 2000 Grand Am under warranty is backed with the following services: i 2000 Pontiac Grand Am Owner’s Manual Litho in U.S.A. Part Number 22619480 A First Edition © Copyright General Motors Corporation 1999 All Rights Reserved ii Table of Contents

When did the litho come out for the Pontiac Grand Am?

How much horsepower does a Pontiac Grand Prix have?

The new Grand Prix sought to deliver performance as attention-getting as its styling, with increased installation percentages for manual transmissions and engine options up to the 390 hp (290 kW) 428 HO.

When did the Pontiac Grand Am get its new name?

For the 1985 model year, Pontiac re-used the Grand Am name for a new compact car to replace the aging and unpopular Phoenix (based on GM’s X Body) using the new-for-1985 N Body.

How do you replace an upper intake gasket?

Plug in the harness into the fuel injectors and coolant temperature sensor. Place new upper intake manifold gaskets into place. Put a new gasket on the EGR tube where it meets the upper intake manifold. Reinstall the upper intake manifold. Reinstall the EGR valve. Reinstall the map sensor and bracket.

What kind of gasket to use for air intake?

The original engineering design used a black nylon frame to position silicone gaskets, sealing the air intake passages and coolant passages to the cylinder head. The black nylon cracks and fails over time, allowing the silicone o-rings to shift and leaks to develop.

How do you remove an upper intake manifold?

Remove the 13 mm studs and 10 mm bolts retaining the upper intake manifold. Lift the back end of the intake manifold closest to the power steering pump like a hinge to provide access to the 3/8-inch cooling lines under the throttle bore. Loosen the clamps on the coolant lines and remove the upper intake manifold from the vehicle.

Where did the 2003 Pontiac Grand Am come from?

No accident or damage reported to CARFAX. 1st owner purchased on 07/10/03 and owned in WA until 09/11/06 • 1st owner drove an estimated 0 miles/year • 2nd owner drove an es… No accident or damage reported to CARFAX. 1st owner purchased on 12/28/02 and owned in KS until 02/19/04 •

Why does my Pontiac 3400 engine still run?

Checking the condition of the engine can lead a person to discovering the early signs of gasket failing. If the coolant level is constantly low in the coolant reservoir, it is a sign of an internal leak. Looking at the area between the cylinder banks may reveal whether or not the intake gasket is still sound.

Can you replace the PCM on a Pontiac Grand Am?

Installing a PCM (power-train control module) is not a difficult task and can be done by almost anyone. If you have been told your Pontiac Grand Am has a faulty PCM and want to replace it yourself, it’s a simple process.

How do you remove a 2002 Grand Prix?

Loosen this hidden screw approximately two turns without removing it. Gently pull down and back on the blower resistor pack, rocking gently side to side to slide the pack off of the screw that you loosened. Once it pops free, the blower resistor pack will pull straight down and out for complete removal from your 2002 Grand Prix.

How many Grand Am’s were made in the first year?

A total of 43,136 Grand Ams were built during the first year of production (both two-door and four-door models).

Where can I buy a 2001 Pontiac Grand Am?

Description: Used 2001 Pontiac Grand Am SE1 with Rear Bench Seats, Audio and cruise controls on steering wheel, Fold Flat Rear Seats. Headers Auto Sales always has 100 cars for $3500 or less and 50 cars for $2000 or less. Headers also has a huge selection of quality used vehicles from $5000 to $15000.

Pontiac SE with Silvermist Metallic exterior and Dark Pewter interior features a 4 Cylinder Engine with 150 HP at 5600 RPM*. VEHICLE REVIEWS: newCarTestDrive.com’s review says “Pontiac calls the Grand Am “sports car excitement with room for everyday life.”

What kind of transmission does a Pontiac Grand Am have?

All engines were available with a Turbo-hydramatic 400 automatic transmission as standard equipment. A 4-speed manual transmission was available with the 400/4-bbl engine in 1973 and 1974, but this was not popular.

What kind of tires did the Pontiac Grand Am have?

The Grand Am was one of only three GM cars to have standard radial tires and appropriate suspension tuning in 1973, with the others being the Oldsmobile Cutlass Salon and Chevrolet Monte Carlo S.

When did GM start making the 3.8 liter V6?

GM approached AMC and asked the automaker to resume production of the Dauntless 225 to power the 1974 GM cars. AMC declined because of the expense to retool its factories, but agreed to sell the 225 V-6’s rights back to GM. In 1975, GM enlarged the bore by .050 inches to increase the displacement to 231 cubic inches, or 3.8 liters.

What kind of engine does a Chevy 3.8L have?

The History of the Chevy 3.8L V6. Chevrolet had two types of 3.8-liter V-6 engines: the 3.8-liter Buick V-6 and the short-lived Chevrolet 3.8-liter version. The venerable and immensely popular Buick V-6 survives today as the GM 3800 and serves as the base engine for many Chevy cars.

What kind of engine did Pontiac have in 1980?

Oh, right; this was 1980-1981, the golden era for GM’s undersized and underpowered V8s. An EPA special, one assumes, until one looks at the EPA numbers. The only thing I could find was this from the 1981 brochure for the 116″ wheelbase Pontiacs (B-Body), that had EPA numbers for all three engines. The 3.8 V6 numbers (20/30).

What kind of engine does a 1981 Pontiac Grand Prix have?

In GM Speak “A” means “available.” Kind of like optional. Just to let you know that the 4.3 ltr v-8 from 1981 still lives in my 1981 Pontiac Grand Prix Brougham. It has the top and pillow top crushed velour you were mentioning in your article. I drive it to car shows and around town local.

What kind of engine does a Pontiac 301 have?

Quite true; but I assumed the next step up was the Pontiac 301 V8 (4.9L), which was hardly a fire-breathing monster in its time (135-140 hp), and would be the logical progression from the 110 hp V6. But what’s this? The 265 cubic inch Pontiac V8? Oh, right; this was 1980-1981, the golden era for GM’s undersized and underpowered V8s.

What kind of engine does a Pontiac have?

The 4.3L Pontiac V8 checks in with city/hwy numbers of 18/27. And the 5.0L 4 barrel Olds 307 V8? 17/28. A virtual tie.

How much horsepower does a GM remanufactured engine have?

This attention to detail and quality will save you time and money by keeping your Chevrolet, Cadillac, Buick, Pontiac, or Olds out of the shop and on the road. Engines are factory checked after assembly to ensure proper operation. Remanufactured crate engines are built to OE horsepower and torque specifications. V6 2.8L

Navigation