Why are cooler lines important in a transmission?
The transmission cooling line system is vital to any automatic transmission. It circulates the hot fluid away to the radiator via cooler lines and returns the cooled fluid back to the transmission. A loss of fluid leading to an overheated transmission can be devastating as the system loses its ability to cool.
What are the fittings for a transmission cooler?
These fittings are a push fit type that allow for a standard hose clamp to keep the transmission line in place. When it comes to installing an aftermarket trans cooler, barb fittings can be used on the radiator transmission fluid outlet for rubber hose to run to the cooler.
How much does it cost to replace transmission cooler lines?
Transmission Line Replacement Cost If you have the skills to tackle this job yourself, it may be best to take your vehicle to a mechanic to replace the lines for you. Replacing an automatic transmission can cost thousands of dollars while a cooler line replacement will cost up to about $500 at most.
Where can I install an aftermarket Trans cooler?
When it comes to installing an aftermarket trans cooler, barb fittings can be used on the radiator transmission fluid outlet for rubber hose to run to the cooler. These fittings are very cost effective and are typically only a few dollars at most and comes in packs with multiple fittings.
What should I use to flush my transmission cooler?
When flushing a transmission cooler, always use ultra-low pressure fluid or air pressure. The cooler is easily damaged by high pressure shop air or high pressure fluid flushing procedures. To flush a cooler, use a low air pressure (no more than 5-8 PSI) to first purge all old fluid from the lines and cooler.
What are the symptoms of a transmission cooler failure?
1. Transmission Line Leak One of the most obvious transmission cooler failure or blown transmission line symptoms is a leak. When a line leaks, there will be transmission fluid on the ground near where the leak is coming from.
The transmission cooling line system is vital to any automatic transmission. It circulates the hot fluid away to the radiator via cooler lines and returns the cooled fluid back to the transmission. A loss of fluid leading to an overheated transmission can be devastating as the system loses its ability to cool.
1. Transmission Line Leak One of the most obvious transmission cooler failure or blown transmission line symptoms is a leak. When a line leaks, there will be transmission fluid on the ground near where the leak is coming from.
These fittings are a push fit type that allow for a standard hose clamp to keep the transmission line in place. When it comes to installing an aftermarket trans cooler, barb fittings can be used on the radiator transmission fluid outlet for rubber hose to run to the cooler.
What should you do if your transmission cooler lines are leaking?
Transmission cooler lines leaking at the radiator puts car owners in a distressing situation. So, as soon as the transmission cooler lines at the radiator of your car are starting to leak, you should immediately take necessary steps to prevent a further issue from arising.
How can you tell if your transmission cooler is bad?
Depending on the transmission cooling system routing, it is not too uncommon to have the transmission cooler lines leaking at the radiator if the lines are starting to rust. When in good condition, transmission fluid is a very bright red, so it is very easy to notice on most surfaces.
When does a transmission need to be cool?
Like mentioned before, the internal components of a transmission require the right about of fluid to stay lubricated, but this helps keeps things cool as well. Once your transmission temperatures start to exceed 225, you will start to greatly reduce its lifespan.
What are the lines on a transmission cooler?
Barb to Barb – Used to connect two rubber lines together. These fittings are common for when you install a transmission cooler and keep the existing rubber lines on the vehicle. This type of fitting is found on both the transmission and radiator where there is a pre bent transmission line.
Depending on the transmission cooling system routing, it is not too uncommon to have the transmission cooler lines leaking at the radiator if the lines are starting to rust. When in good condition, transmission fluid is a very bright red, so it is very easy to notice on most surfaces.
Like mentioned before, the internal components of a transmission require the right about of fluid to stay lubricated, but this helps keeps things cool as well. Once your transmission temperatures start to exceed 225, you will start to greatly reduce its lifespan.
When it comes to installing an aftermarket trans cooler, barb fittings can be used on the radiator transmission fluid outlet for rubber hose to run to the cooler. These fittings are very cost effective and are typically only a few dollars at most and comes in packs with multiple fittings.