Is there a problem with the etc light on my Jeep?
Well, I think I may have finally fixed the electronic throttle control light problem on my Jeep. This has been a problem for the past several months. The ETC light would come on several times a week. The dealer replaced the throttle body and throttle position sensor, the powertrain control module, and the gas pedal assembly and sensor.
Is there a problem with my Jeep Wrangler engine?
Blown engines are serious issues that affect a lot of Jeep owners and should be not be taken lightly. If you hear something odd coming from your car engine, you ought to take it over to your dealer or mechanic. One more Jeep issue to point out involves the throttle position sensor.
What to do if your Jeep Wrangler has steering problems?
Replacing the shocks, sway bar, and tires can solve the steering problem you may be experiencing with your own Jeep Wrangler. Bring your Jeep to a professional to seek additional assistance to determine the cause of your issue. Another common Jeep Wrangler problem deals with the electrical system of the vehicle.
Is there a problem with the throttle control on my Jeep?
The Jeep continues to run perfectly, this is just an annoyance. Well, I think I may have finally fixed the electronic throttle control light problem on my Jeep. This has been a problem for the past several months. The ETC light would come on several times a week.
Are there any electrical problems with my Jeep Wrangler?
Jeep Wrangler owners have reported 852 problems related to electrical system (under the electrical system category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jeep Wrangler based on all problems reported for the Wrangler.
Replacing the shocks, sway bar, and tires can solve the steering problem you may be experiencing with your own Jeep Wrangler. Bring your Jeep to a professional to seek additional assistance to determine the cause of your issue. Another common Jeep Wrangler problem deals with the electrical system of the vehicle.
Are there any problems with the 2017 Jeep Wrangler?
See all problems of the 2017 Jeep Wrangler . Our 2021 Jeep started smoking in the engine and within 10 minutes burst into flames. The entire front end was damaged beyond repair / burned and fire stations had to put out the fire. My daughter, dogs and I were able to make it out of the car but very scary.
When does a Jeep Wrangler go into electric mode?
Since the electric mode distance is limited, the car has a hybrid and gas-only mode that runs on gas for when the battery needs a charge after 30 miles.
Why does my Jeep not start when I Turn on the ignition?
If your vehicle does not have a check engine light this may not be a problem. It is possible that this is just the sound that the vehicle makes normally. If you’ve owns the vehicle for quite some time and… Engine heat can degrade components such as ignition coils and the crankshaft position sensor. The components will then fail once they are hot.
Why is the Check Engine light off on my Jeep Patriot?
Check Engine light is off. I connected a OBDII scanner and there are not DTCs. My patriot is at a “limp mode”, It is no the throttle pedal because with the scanner I can see how the parameter change when I depress it. and because it is limp mode, the throtle actuator control and throttle position parameters do not change.
Why are all the lights flickering in my Jeep?
Long story short, the battery was going bad. It was causing some REALLY weird things to happen: dash lights flickering, seat heaters wouldn’t work for 2 to 3 minutes after a start, then the things I described above started happening. Changed the battery 6 months ago, everything disappeared!!!
Well, I think I may have finally fixed the electronic throttle control light problem on my Jeep. This has been a problem for the past several months. The ETC light would come on several times a week. The dealer replaced the throttle body and throttle position sensor, the powertrain control module, and the gas pedal assembly and sensor.
What should I do if my Jeep won’t start?
The normal sequence would be: start and run for 10 seconds, then quit, if someone tries to use an unauthorized key. It will allow you to do this three times before it shuts down completely. Anti-theft! If you have a second key, try try it and see if the problem goes away. If so, you will need to get the first key reprogrammed.
Why does my etc light keep coming on?
This has been a problem for the past several months. The ETC light would come on several times a week. The dealer replaced the throttle body and throttle position sensor, the powertrain control module, and the gas pedal assembly and sensor. NONE of these repairs fixed the problem.
The Jeep continues to run perfectly, this is just an annoyance. Well, I think I may have finally fixed the electronic throttle control light problem on my Jeep. This has been a problem for the past several months. The ETC light would come on several times a week.
Can a gas pedal sensor be replaced on a jeep?
He grinned and said that when my Jeep was in for the 10 days, he did replace the gas pedal assembly including the pedal sensor. He said that he would talk to Chrysler engineering tomorrow so they can come up with a new game plan. The Jeep continues to run perfectly, this is just an annoyance.
What’s the problem with the throttle on a jeep?
I went back and they said that the throttle position sensor faulty and the entire throttle body needed to be replaced. So, they ordered one and installed it. They then told me that when they tested it, the computer said that it was only at 75% throttle when they were in fact giving it full throttle.
What causes an electronic throttle control light to come on?
The most common causes of an electronic throttle control light are a faulty throttle control sensor or a faulty throttle accelerator pedal position sensor. But while those are the most common causes of an electronic throttle light, they aren’t the only things that could be going on.
What kind of channel is hemi throttle body cleaning?
This channel is dedicated to mostly automotive related interests. I show different types of automotive creativity with motorcycles, cars, trucks and even bicycles.
Where is the electronic throttle control light on?
The Electronic Throttle Control light is flashing in the dash of my 2003 Ram 2500 with the 5.7 Hemi. The Malfunction Indicator Light is also on. The truck still runs fine, no missing or hesitation.
How to reset the electronic throttle control system?
To reset the electronic throttle control system, perform the following: Wait for all the warning lights to go out. The check engine light may remain on. Slowly depress the accelerator pedal all the way to the floor. Slowly release the accelerator pedal until it is all the way back up at the rest position. Turn the ignition key to “OFF” position.
What causes a jeep to have a no start condition?
The usual suspects, that can cause this type of problem, are a bad fuel pump, bad crank sensor, bad ignition coil (if your Jeep is distributor equipped), etc. Does Not Crank Condition: Means that the engine is not cranking when you turn the key to crank the engine.
This has been a problem for the past several months. The ETC light would come on several times a week. The dealer replaced the throttle body and throttle position sensor, the powertrain control module, and the gas pedal assembly and sensor. NONE of these repairs fixed the problem.
When does a Jeep Wrangler Unlimited not start?
2 months after I leased a new 2018 JK unlimited with 800+ miles I stopped to get gas and it wouldn’t start, but in 15 minutes or so it magically started. A couple of months later it happened again.
Why are the lights on my Jeep Liberty not going off?
A Jeep Liberty’s Interior Lights Won’t Go Off. If the interior lights on your Jeep Liberty stay on, there could be three possible issues: the fuse is stuck, one of your doors is open, or the light switch is set to the “ON” position. All three of these issues have very simple solutions that should not take more than ten minutes to solve.
What does a red warning light on a jeep mean?
Most warning lights are pretty much straight forward but what does the red lightning bolt symbol in a Jeep mean? The red lightning bolt indicates that there is a problem with your Jeep’s Electronic Throttle Control (ETC). This is a system that replaced the mechanical throttle mechanism with a sensor based one.
How do you turn off the lights on a Liberty?
Open and close all of the Liberty’s doors. Make sure every door is closed all the way. If the lights are still on, you may need to check to the light switch. Press the light switch on the headlamp control panel. It should be fully depressed for the lights to be off.
A Jeep Liberty’s Interior Lights Won’t Go Off. If the interior lights on your Jeep Liberty stay on, there could be three possible issues: the fuse is stuck, one of your doors is open, or the light switch is set to the “ON” position. All three of these issues have very simple solutions that should not take more than ten minutes to solve.
Check Engine light is off. I connected a OBDII scanner and there are not DTCs. My patriot is at a “limp mode”, It is no the throttle pedal because with the scanner I can see how the parameter change when I depress it. and because it is limp mode, the throtle actuator control and throttle position parameters do not change.
Most warning lights are pretty much straight forward but what does the red lightning bolt symbol in a Jeep mean? The red lightning bolt indicates that there is a problem with your Jeep’s Electronic Throttle Control (ETC). This is a system that replaced the mechanical throttle mechanism with a sensor based one.
When to see the electronic throttle control light?
The only other time you should see the electronic throttle control light is when you turn on your vehicle. At this point, your vehicle is completing a system check, and when everything checks out, the light should turn off.
What causes check engine light to come on?
A strong battery can be hampered by poor connections, which will sometimes finally pass current. A failing starter solenoid (burned contacts) will… If you are getting a check engine light coming on and flashing of the light when problem is happening.
What to do if your Jeep Wrangler won’t start?
Here is a trick to get the Jeep going again if the engine won’t crank or start and the small red light (#17 Sentry Key / Security alarm light is on above the temperature gauge). Another symptom is the Remote Key Entry system will not operate. Look up TSB 08-007-08 or TSB 08-007-08 REV. A on Google.
The most common causes of an electronic throttle control light are a faulty throttle control sensor or a faulty throttle accelerator pedal position sensor. But while those are the most common causes of an electronic throttle light, they aren’t the only things that could be going on.
What’s the problem with my Jeep Liberty engine?
Check engine light came on (misfire on cylinder 4) – spark plugs replaced. Light came on again (misfire on cylinder 4) – switched coil from 4 to 2. Light came on again (misfire on cylinder 4) – found out today that every valve on the right side of the engine is burnt.
Is the ESP light on a Jeep Liberty?
Just tiring to accelerate on the highway and ESP light started flashing and loss of gas peddle and it seemed like the jeep was breaking. This was going on and off for about 5 miles. I did notice that when you turn on the ESP you do get back little control. Well its back to the dealer Monday. electrick: The ESP is on all 2006 Liberty’s.
Are there any problems with the Jeep Liberty?
The Liberty was fairly popular in its day, but it was not without its problems as well. If you’re interested in picking up a used Liberty for yourself, it’s good to be familiar with the problems that the various model years were faced with.
What was the rating of the Jeep Liberty in 2006?
Based on the Insurance Institute for Highway Safety crash testing, the 2006 Jeep Liberty was also poorly rated, in particular is it related to rear crash test results. The Jeep Liberty fared a little bit better in 2007 than it did in 2006 in terms of problems reported by drivers.
Why does the Check Engine light come on on my Jeep Compass?
After it happens, the throttle light and check engine light will come on. Rough idle, spotty acceleration, remote start cuts out, engine light, ebs light, throttle control light all come on, higher rpm this issue sounds like multiple others that people have had, but there’s no recall for my VIN?.
What does the throttle control warning light on a Jeep Compass mean?
The contact owns a 2007 Jeep Compass fwd. The contact stated that the electronic throttle control warning light would illuminate intermittently. The vehicle would not respond to acceleration attempts and would stall sporadically, without warning. The failure recurred on three occasions. The dealer was unable to diagnose the failure.
What causes a flashing check engine light on a Jeep Compass?
While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Compass’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped . If you have VVT, it may be having issues.
What does a flashing check engine light mean?
A flashing check engine light is your Jeep Compass’s way of saying “I have a serious problem, don’t ignore me”. Most of the time, that serious problem is a misfire. This flashing light should not be ignored. When your engine is misfiring, it is dumping raw fuel into the exhaust.
Why is the throttle control warning light on on my Jeep Patriot?
My Jeep Patriot 2014 suddenly lost power and started jerking while driving not allowing me to accelerate. Three lights came on the throttle control warning light, engine and traction control light. Replaced throttle body my self and I want my dang recall or a lawsuit filed because this could cause a major accident and lifes are involved.
Why does the warning light come on on my 2013 Jeep Wrangler?
That warning light started coming on the first summer I owned my 2013 JKU. It spent almost two weeks in the dealer shop and they finally said they do not know why it comes on. They replaced the throttle body as you cannot just replaced the throttle control sensor.
When does the Lighting Bolt light come on in a Jeep Wrangler?
When I start my jeep in the morning the lighting bolt light and the check engine light come on, and the engine does like a half crank. It turn off after a few seconds is this a good thing or a bad thing. My jeep is a month old 600 hundred miles. He’s no good to me dead.
What does the throttle control light mean on a Jeep Wrangler?
While driving at roughly 70 mph on highway throttle felt a little weird then the rpms dropped to zero as the electronic throttle control light on the dash came on. Immediately headed for the shoulder as I lost power steering and power braking although the electronic steering/braking system was alerted during my swerve towards the shoulder.
Why does the ESP Bas light come on on my Jeep Wrangler?
Steering Angle Sensor The steering angle sensor is one of, if not the most, common causes of the ESP BAS light to come on. As mentioned above, make sure to turn the steering wheel twice to the right, twice to the left, and finally back to the center. This resets the steering angle sensor in your Wrangler.
What is the throttle control warning light on 2016 Jeep Wrangler?
See all problems of the 2016 Jeep Wrangler . The contact owns a 2011 Jeep Wrangler. The contact stated that the electronic throttle control warning light illuminated on the instrument panel as the vehicle stalled. The vehicle was restarted but would not accelerate beyond 40 mph.
What causes the brake warning light on a Jeep Wrangler?
Jeep Wrangler Brake Warning Light Causes 1 Brake Fluid Leak. Since you’ve already checked the emergency brake handle, now it’s time to check the master cylinder and see if the brake fluid is low or not. 2 Pressure Differential Switch. Your brake system is divided into two circuits. 3 Check the Brake Lights.
What causes the Check Engine light to come on?
Problem seems to cycle – driving along, suddenly the check engine light comes on along with the electronic throttle control warning light, as the temp gauge drops to zero – which triggers the Check Gauges warning light to come on. Drive more, stop a few times, ETC light goes off, temp gauge starts working again.
Here is a trick to get the Jeep going again if the engine won’t crank or start and the small red light (#17 Sentry Key / Security alarm light is on above the temperature gauge). Another symptom is the Remote Key Entry system will not operate. Look up TSB 08-007-08 or TSB 08-007-08 REV. A on Google.
Problem seems to cycle – driving along, suddenly the check engine light comes on along with the electronic throttle control warning light, as the temp gauge drops to zero – which triggers the Check Gauges warning light to come on. Drive more, stop a few times, ETC light goes off, temp gauge starts working again.
What should you do if your engine light goes out?
The issue is a major one and you should stop the engine immediately to prevent serious damage. For instance, it might cause the catalytic converter to overheat and even cause a fire. N.B. It is totally normal for the light to illuminate for a few seconds when you start the engine. But it should go out when the engine is running.
When does the throttle control light come on?
The electronic throttle control light jeep wrangler or other modern vehicles will come on when there is an issue with your throttle control. If the light comes on and off, there is nothing to worry about. The light usually resembles a lightning bolt with a reserved parenthesis on either side.
How can I reset the throttle control system?
To reset the throttle control system what you need to do is Switch on the ignition key, don’t start the engine. Then, wait for a minimum of 3 seconds. Now, press the accelerator pedal and do press and release five times amidst 5 seconds. Press the pedal again, and this time hold on pressing for around 20 seconds.
The electronic throttle control light jeep wrangler or other modern vehicles will come on when there is an issue with your throttle control. If the light comes on and off, there is nothing to worry about. The light usually resembles a lightning bolt with a reserved parenthesis on either side.