How do you replace a HID light bulb?
Unplug the wire that runs from the ballast to the light socket. Remove the socket and undo retaining clips that hold the HID bulb in place. Insert the new HID bulb and secure it in place. Replace the socket in the light assembly.
How can I tell if my HID light bulb is bad?
The HID ballasts or LED drivers are the two metal boxes that came with your kit. To perform this test, please swap your HID ballast or LED driver to opposing sides and note what happens to your kit. Swap the HID or LED bulbs to opposing sides. If the problem is reversed, you might have a bad bulb. This step will check if you have a bad bulb.
What kind of power does a HID bulb need?
The arc is ionized gas that produces a plasma discharge that generates high intensity light. The ballast’s job is to regulate power to the HID bulb to maintain the arc. It must provide a constant 35 watts at 70 to 110 volts.
When does the hid headlight bulb shut off?
• HID headlight bulb shuts off after being on for a while. Shut off is sporadic and unpredictable but happens more and more often over the next 100 hours of operation. Swap the problem bulb to the opposite side.
Unplug the wire that runs from the ballast to the light socket. Remove the socket and undo retaining clips that hold the HID bulb in place. Insert the new HID bulb and secure it in place. Replace the socket in the light assembly.
How do you install HID light in car?
Open your vehicle’s hood. Open the back cap on the headlight assembly and take out the stock bulb. Do not touch the bulb’s glass with your finger. You can wear gloves as protection. Insert the xenon light into the headlight housing. You have to be gentle when removing the plastic cap and remember not to touch the bulb.
How do you test a HID light bulb?
Insert the xenon bulb into the headlight. Connect the HID bulb with the ballast and connect the HID ballast back to the stock socket. Test the HID light to see if it lights up. If not, flip the adapter 180 degrees. Test the HID light to see if it lights up.
How do you test a hid conversion kit?
Test the HID light to see if it lights up. If not, flip the adapter 180 degrees. Test the HID light to see if it lights up. If not, flip the adapter 180 degrees. With this HID Conversion Kit, your headlights’ output will be much brighter and you’ll get a clean, crisp look.
What to do if HID light does not come on?
Turn on your HID headlights. If both lights are lit, wait for one bulb to turn off. If one doesn’t light when you turn on the headlights, proceed with this test: Have a helper watch the HID bulb closely as you turn on the headlight switch. They’re looking for any sign of flicker.
Is it OK to install aftermarket HID headlights?
For the last several years, there’s been this trend — among people who are approximately as dim as their headlights apparently are — of installing aftermarket high-intensity or “xenon” headlights in vehicles that weren’t designed for them. I’m here today to tell you to stop doing this.
What are the signs of a bad hid headlight bulb?
Signs of a bad HID headlight bulb. • HID headlight bulb flickering is the EARLIEST sign of bulb failure. • HID headlight bulb shuts off after being on for a while. Shut off is sporadic and unpredictable but happens more and more often over the next 100 hours of operation.
What are the components of a hid headlight system?
HID headlights components. An HID headlight system consists of an HID bulb, ballast, an integraligniter in D1 style bulbs or an external igniter for D2 style bulbs.