When does the idle control system code p0507 occur?
The P0507 trouble code is being triggered when the idle control system RPM is Higher than expected. All modern engines do have a desired idle rpm, usually between 600-1000 rpm.
Where do I find the p0507 code on my car?
Acedotally this code seems to be more commonly found on Chevrolet, VW, Nissan, Audi, Hyundai, Honda, Mazda and Jeep vehicles. This P0507 code is one that’s sometimes triggered on vehicles that have electronic throttle control.
What do you need to know about DTC p0507?
When diagnosing DTC P0507, you’ll want to focus on the air intake system, particularly the throttle body, IAC, and intake manifold. Pay attention to concurrent DTCs, which could also point you to a solution.
What is the idle control system RPM code?
The P0507 code is a common code for vehicles equipped with an electronic throttle body. Newer vehicles do normally use an electronic throttle body.
The P0507 trouble code is being triggered when the idle control system RPM is Higher than expected. All modern engines do have a desired idle rpm, usually between 600-1000 rpm.
What does the OBD2 code p0507 mean?
It is the generic OBD2 DTC or diagnostic trouble code that refers to the error in your car’s indolent control system. P0507 is associated with both P0505 & P0506. The P0507 means the indolent control system’s RPM is higher than usual. The ECU comes with a particular RPM range that the idle control system can reach.
What does the p0507 code on the ECM mean?
What Does P0507 Mean? The P0507 code is triggered when the Engine Control Module ( ECM) detects that the engine is idling higher than the specified idle rpm range. The standard engine idle is usually between 600-800rpm based on the model of the vehicle.
Why is my Honda Accord p0507 idle so high?
If you have determined that you don’t have a vacuum leak, the IAC is a great second place to troubleshoot P0507. A throttle body opens and closes millions of times in the life of a vehicle. All of the air that passes through it can slowly cause it to collect grime. This grime can change the idle characteristics of the vehicle.
What causes p0507 code on Jeep Grand Cherokee?
The Idle Air Control Valve is often not the cause of the code. Here are some of the most common causes of P0507 in the Jeep Grand Cherokee, as well as waist to troubleshoot them. Keep in mind that there are differences in model years. It would be a good idea to start by looking for a vacuum leak and move forward from there.
If you have determined that you don’t have a vacuum leak, the IAC is a great second place to troubleshoot P0507. A throttle body opens and closes millions of times in the life of a vehicle. All of the air that passes through it can slowly cause it to collect grime. This grime can change the idle characteristics of the vehicle.
What does the OBD code p0509 mean?
This OBD-II code belongs to a series of fault codes (P0505 to P0509) that pertain to a fault in the idle control system, and it means that the engine computer has detected that the engine idle speed has exceeded the manufacturer’s pre-programmed specifications for a certain amount of time.
When is the p0507 idle air control system higher than expected?
In this case, the P0507 DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM.
The Idle Air Control Valve is often not the cause of the code. Here are some of the most common causes of P0507 in the Jeep Grand Cherokee, as well as waist to troubleshoot them. Keep in mind that there are differences in model years. It would be a good idea to start by looking for a vacuum leak and move forward from there.
When to set the p0507 diagnostic trouble code?
In this case, the P0507 DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM. In the case of GM vehicles (and possibly others) if the idle speed is over 200 rpm higher than expected, this code will be set.
Why is the idle RPM higher than expected?
P0507 HONDA | Idle Control System RPM Higher Than Expected | The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake
It is the generic OBD2 DTC or diagnostic trouble code that refers to the error in your car’s indolent control system. P0507 is associated with both P0505 & P0506. The P0507 means the indolent control system’s RPM is higher than usual. The ECU comes with a particular RPM range that the idle control system can reach.
What Does P0507 Mean? The P0507 code is triggered when the Engine Control Module ( ECM) detects that the engine is idling higher than the specified idle rpm range. The standard engine idle is usually between 600-800rpm based on the model of the vehicle.
What causes the idle control system rpm higher?
The P0507 code means the idle control system has excessively high RPM. The ECU has a specific rpm range the idle is allowed and when it is higher than expected the ECU sets the P0507 code. Once this code is triggered it puts the vehicle into a failsafe mode and the Check Engine Light is illuminated on the dashboard. What causes the P0507 code?
What does the Thi p0507 code set mean?
Thi P0507 code sets when the Powertrain Control Module (PCM) detects an engine speed outside of the Idle Air Control (IAC) valve range of control. Possible symptoms. P0507 Chevrolet Description. The Idle Air Control (IAC) valve is a Powertrain Control Module (PCM) controlled stepper motor located on the throttle body.
What does the Diagnostic Code p0507 mean?
What does P0507 mean? This diagnostic trouble code (DTC) is a generic powertrain code, which means that it applies to OBD-II equipped vehicles. Although generic, the specific repair steps may vary depending on make/model. Acedotally this code seems to be more commonly found on Chevrolet, VW, Nissan, Audi, Hyundai, Honda, Mazda and Jeep vehicles.
What does DTC stand for on Nissan p0507?
They rely on sensors and electronics to control the throttle. In this case, the P0507 Nissan DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM.
What does the p0507 code on my indolent mean?
The P0507 means the indolent control system’s RPM is higher than usual. The ECU comes with a particular RPM range that the idle control system can reach. Therefore, the ECU sets this error code when the RPM is higher than it should be. When this code has been triggered, it will put your car into the failsafe mode.
What does p0507 mean in Honda engine control module?
P0507 HONDA Meaning The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed.
What is the diagnostic code for idle control system rpm higher?
P0507 is a diagnostic trouble code (DTC) for “Idle Control System RPM Higher Than Expected”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
The P0507 code means the idle control system has excessively high RPM. The ECU has a specific rpm range the idle is allowed and when it is higher than expected the ECU sets the P0507 code. Once this code is triggered it puts the vehicle into a failsafe mode and the Check Engine Light is illuminated on the dashboard. What causes the P0507 code?