Why are all the lights on my Jeep Cherokee not working?
The lights work (cel, seatbelt light, air bag, etc) but the actual gauges don’t work. Any ideas of where I should check? All the grounds seem to be connected, and I haven’t made any changes with wiring in regard to the cluster.
Why are the lights on my instrument cluster not working?
2006 infiniti qx56 – rpm not working, some of the dash lights not lit, when I turn headlights on or day light running lights on the entire instrument cluster goes black. when turned off, the dash is lit (except for the ones that don’t lite at all). do I need a new cluster?
Why is the instrument cluster on my Jeep Cherokee not working?
The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698. All of them have to do with the PCM not communicating with the instrument cluster.
Why is my Car Cluster not working on my 1994 Concorde?
I have a 1994 Chrysler Concorde 3.5 and my cluster isn’t working at all. when you crank the car the speedometer jumps just a tiny bit, but if you press the gas pedal the rpm gauge doesn’t move. Also when you drive the car, the speedometer and the rpm gauge doesn’t move. Everything light wise works.
The lights work (cel, seatbelt light, air bag, etc) but the actual gauges don’t work. Any ideas of where I should check? All the grounds seem to be connected, and I haven’t made any changes with wiring in regard to the cluster.
The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698. All of them have to do with the PCM not communicating with the instrument cluster.
What to do about flashing dash cluster on Jeep Wrangler?
Problem fixed, replaced battery with optima yellowTop and replaced the battery terminals to Heavy Duty Battery Terminals and full tighten, drove around 120 Km and problem disappeared. Did you find the recommended reading relevant to this discussion?
Why does my Jeep Wrangler not start randomly?
The Jeep will also not start randomly. I also know the web is full of people with the same issue (even in other Jeep vehicles). The dealership knows nothing, and was blaming my CB and LED headlights.
Why does my Jeep not recognize my key?
Most guys can come to your Jeep and program the keys to the Jeep. If the key light is on in the dash, the Jeep is not recognizing the RFID in the key. I am not sure what would cause the ECU to lose the key programing. My locksmith only charges me $35 for the programing (per key). Karen, is the light flashing or steady?
What to do if your Sentry Key Light is not working?
Call around to your local locksmiths. Most guys can come to your Jeep and program the keys to the Jeep. If the key light is on in the dash, the Jeep is not recognizing the RFID in the key. I am not sure what would cause the ECU to lose the key programing.
Most guys can come to your Jeep and program the keys to the Jeep. If the key light is on in the dash, the Jeep is not recognizing the RFID in the key. I am not sure what would cause the ECU to lose the key programing. My locksmith only charges me $35 for the programing (per key). Karen, is the light flashing or steady?
Call around to your local locksmiths. Most guys can come to your Jeep and program the keys to the Jeep. If the key light is on in the dash, the Jeep is not recognizing the RFID in the key. I am not sure what would cause the ECU to lose the key programing.
How do you program a key to a Jeep Cherokee?
Call around to your local locksmiths. Most guys can come to your Jeep and program the keys to the Jeep. If the key light is on in the dash, the Jeep is not recognizing the RFID in the key. I am not sure what would cause the ECU to lose the key programing. My locksmith only charges me $35 for the programing (per key).
Why is the key light on in the dash?
Most guys can come to your Jeep and program the keys to the Jeep. If the key light is on in the dash, the Jeep is not recognizing the RFID in the key. I am not sure what would cause the ECU to lose the key programing.
Is there a problem with my 2000 Jeep Grand Cherokee?
No one has added a helpful site for this 2000 Grand Cherokee problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: Search CarComplaints.com for these popular complaint phrases…
Why is the Speedo cable on my Jeep Cherokee not working?
No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector? okay well im out of answers. No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector?
Is there a no start Jeep Grand Cherokee?
I have a 2000 Jeep Grand Cherokee with a 4.0L with a no start, no spark condition. I also have a fuel and voltage gauge that is NOT reading correctly, however I did do a gauge check, hold in the trip reset and turn the key on and they all worked.
No one has added a helpful site for this 2000 Grand Cherokee problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: Search CarComplaints.com for these popular complaint phrases…
Why is the CPS on my Jeep Cherokee not working?
According tothe All Data the white w/ double black trace and the purple with brown trace wires are communication wires that go back to the PCM. Again, another reason why I don’t think that the CPS is bad.
What to do if your YouTube headlight is not working?
Headlight is not working. Replace headlight relay If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
What does it mean when there are no dash lights?
Found loose connection between headlight switch and fuse panel for tailights no tailights = no dash lights. Did you find the recommended reading relevant to this discussion? Help us improve your recommendations by telling us what you would like to see.
Why are there no parking lights on my 92 Cherokee?
92 cherokee limited No Parking Lamps,Dash,lights! Well this started after the battery went dead. First the head lamp flashed after installing new battery. reset security with key lock and unlock drivers and passenger door. Head lamps stopped flashing after locking and unlocking passenger door.
What to do if your dashboard light does not work?
A blown fuse can disable the vehicle’s dashboard light. The fuse box may be under the hood, or near the floor, near the brake pedal, or there may be two fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary. Note: also check if the tail lights are working.
Found loose connection between headlight switch and fuse panel for tailights no tailights = no dash lights. Did you find the recommended reading relevant to this discussion? Help us improve your recommendations by telling us what you would like to see.
What to do if your instrument cluster is not working?
Side note: NO work has been done on the XJ since the XJ last ran without issue, and that was a week ago. Maybe try and disconnect the battery to clear the pcm?
Why does my Jeep Wrangler radio not turn on?
On some occasions when I turn on the vehicle the radio won’t turn on at all. I won’t even light up with the other interior lights. But if I leave the vehicle sitting overnight it will return to normal. It will remember to Bluetooth my phone but it will reset all the auto setting. Such as the equalizer and ballance. Loading…
2006 infiniti qx56 – rpm not working, some of the dash lights not lit, when I turn headlights on or day light running lights on the entire instrument cluster goes black. when turned off, the dash is lit (except for the ones that don’t lite at all). do I need a new cluster?
Why are the lights on my dash not working?
Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.
Where are the lights on the dashboard located?
Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch. Tail lights and dash lights are connected through the tail light (and/or brake light) fuse.
What are the warning lights on a jeep?
The following are warning lights and indicators found in vehicles built by Jeep. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are nearly 80 of them so be patient!
Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.
Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch. Tail lights and dash lights are connected through the tail light (and/or brake light) fuse.
How can i dim the lights on my dashboard?
Begin the process by trying the simplest of solutions first. Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch.
According tothe All Data the white w/ double black trace and the purple with brown trace wires are communication wires that go back to the PCM. Again, another reason why I don’t think that the CPS is bad.
Why is the PCM on my Jeep Cherokee not working?
I did notice that I have a wire (white with double black trace) that is cut, but after pulling the entire harness out I don’t see another end of that wire anywhere. According tothe All Data the white w/ double black trace and the purple with brown trace wires are communication wires that go back to the PCM.
No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector? okay well im out of answers. No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector?
Do you clear trouble codes before resetting airbag light?
Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.
Why does my airbag light keep coming on?
The engine and airbag lights are some of the dashboard lights that you need to take a particular interest in. Airbags are designed in such a way that they inflate whenever there is a collision. However, faulty sensors can cause your airbag light to remain continuously on.
Why is the air bag light on on my 1998 Jeep Cherokee?
Air bag light is on, we find a recall that is open and active. Bright vehicle to yaklin for repair and they declined the repair because the part has been discontinued. See all problems of the 1998 Jeep Cherokee .
Why does my air bag light not go off?
See all problems of the 1998 Jeep Cherokee . The air bag light comes on an d will not go off. The light say service air bag. Have taken it to a dealership to check the issue. They thought pinched wire and they repaired it; however after 2 days the light returned.
What happens if your brake lights are not working?
If any of them does not work, other drivers behind you won’t see if you are moving or not. It can cause severe accidents, especially on dark streets or during heavy rain and snow. The cops will also flag you if they see you are during without functioning lights.
Why is my brake light not working on my Jeep Grand Cherokee?
Jeep Grand Cherokee brake light not working – fixed! – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
Why does my car have no running lights?
When you shut off the key with the headlights on there is a relay/timer that leaves the headlights on for 30sec. or so,so you can see to get in the house,open the garage door,whatever.Nothing is broke so don’t fix it.Also,the running light issue could be a bad connection in the front harness behind the grill.Do you have taillights?
Why are the brake lights not working but the tail lights are?
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
Why are the rear lights on my car not working?
The causes for dysfunctional rear lights are: 1 Burnt bulbs 2 Blown out fuse 3 Damaged wiring 4 Electrical issues
What does it mean when your headlights don’t work?
With that in mind, it can be tremendously useful to start off by looking at whether both, or just one, of your headlights have failed, and whether or not the high or low beam mode still works. When headlights stop working, it’s usually an electrical problem or an physical issue with the bulbs themselves.
What to do when both head lights stop working at the same time?
When that happens, the operational lifespan of your headlight capsule will be severely compromised, and the only fix is to replace the headlight assembly. When both headlights stop working at the same time, the bulbs usually aren’t at fault.
Why is the left side of my headlight not working?
LEFT RIGHT HEADLIGHT NOT WORKING FIX – YouTube WHY HEADLIGHT NOT WORKING. LEFT RIGHT HEADLIGHT NOT WORKING FIX If playback doesn’t begin shortly, try restarting your device.
Why are my high beam headlights not working?
In the case of high-intensity discharge (HID) headlights, or Xenon headlights, there’s an additional component. To get the xenon and salts to plasma state, the HID generator bumps the voltage up to 30,000 V, then stabilizes around 90 V when the bulb is in operation. If the generator fails, the bulb won’t light.
What should I do if my headlight bulb fails?
If you have multiple headlight bulb failures, make sure you are especially clean when doing the job. If at all possible, don’t touch the glass portion of the bulb at all. If necessary, handle the bulb with clean latex or nitrile gloves. Finally, if the bulb is dirty, clean it with a fresh alcohol pad before installation.
Why are the lights on my car not working?
On some vehicles, particularly those with HID headlights or solid-state circuit protection (Zener diodes or high beam circuit breakers) installing the wrong bulb might result in intermittent headlight operation or no high beams at all. The wrong bulb might not ignite at the right voltage or draw too much current for the circuit protection’s design.