Can you unplug your intoxalock?
Do not disconnect the device and bring it inside (unless you live in Minnesota and are approved to do so by your monitoring authority). A disconnection will register a power interruption and may be reported as a tampering violation.
How long does it take to install an IID?
You can either drop off your vehicle or wait for it while the interlock is installed. You can expect the installation to take about two hours.
How does the fuel filler work on a Jeep Liberty?
A fuel filler/vent tube assembly using a pressure/ vacuum, 1/4 turn fuel filler cap is used. The fuel filler tube contains a flap door located below the fuel fill cap. A one-way check valve is installed into the tanks fuel fill fitting.
Where is the fuel pump relay on a Jeep Liberty?
STANDARD PROCEDURE – FUEL SYSTEM PRESSURE RELEASE Use following procedure if the fuel injector rail is, or is not equipped with a fuel pressure test port. (1) Remove fuel fill cap. (2) Remove fuel pump relay from Power Distribu- tion Center (PDC). For location of relay, refer to label on underside of PDC cover.
How to test for fuel leak in Jeep Liberty?
DIAGNOSIS AND TESTING – FUEL PRESSURE LEAK DOWN TEST Use this test in conjunction with the Fuel Pump Pressure Test and Fuel Pump Capacity Test.
Where is the fuel tank located on a Jeep Liberty?
OPERATION Fuel is picked up in the fuel tank by the fuel pump module. This module is located on the bottom of the fuel tank. A fuel return system is provided within the fuel pump module using check valves. A separate fuel return line from the engine to the tank is not used. The fuel pressure regulator and the main fuel filter are not combined.
How to add Freon to a 2002 Jeep Liberty?
If there is a problem with your compressor or evaporator, adding freon will not restore cooling. How to add freon to your 2002 Jeep Liberty: hook up the can of refrigerant (likely r-134a) to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs.
Can you change the engine on a Jeep Liberty?
While it’s true that on rare occasions you can swap a 3.7 Jeep liberty engine, it can be dangerous to do so due to emissions standards, engine weight, bracket mounts, and PCM diagnostics. Therefore, it’s advisable to use an original 3.7 Jeep Liberty engine to get the maximum efficiency and productivity for your Jeep Liberty.
What kind of engine does a Jeep Liberty KJ have?
2002-2004 Jeep Liberty KJ w/ 3.7L These are Gatorback brand belts. 2002-2005 Jeep Liberty KJ w/ 2.4L Engine. 2003-2007 Jeep Liberty KJ w/ 2.8L Turbo Diesel engine.
A fuel filler/vent tube assembly using a pressure/ vacuum, 1/4 turn fuel filler cap is used. The fuel filler tube contains a flap door located below the fuel fill cap. A one-way check valve is installed into the tanks fuel fill fitting.