What to do if there is no low beam light?
here is that Headlights Circuit . If there is no voltage at those fuses, try temporarily jumping the pink/white wire from the low beam relay to ground and see if it works now. If so, hook the wire back up and this time ground the yellow wire from the bcm to the dimmer switch to ground and check again if the low beams now work.
Why are my low beam headlights not working?
Rating does not close the post and you’re more than welcome to follow up. I changed the relay low beam lights still do not work! Check if you have voltage at both of the low beam fuses with the headlights on low beam. that would be #12 and #16 in the underhood fuse block.
Why are the low beams out but the High Beams work?
Came back used it first night everything fine. Next day went to turn on headlights and both were out, but high beams worked. Low beams aren’t working but high beams work. Any ideas? I would bet the problem lies in the relay, which should be located under the hood.
Why are the low beams in my Subaru not working?
If the low beams in your Subaru aren’t working, it might seem like a good idea to use the high beams–but that can be dangerous, as well. If the high beams work, but the low beams don’t, there are a number of possible causes. Below, we list four of the most common ones. 4. Burned-Out Bulbs
Is it possible to fix a bad low beam headlight?
Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.
Do you need to replace both high and low beams?
Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.
What to do when your low beam light goes out?
Disconnect the battery. Be sure you remember which side of the car has a blown out low beam bulb before disconnecting the battery. To disconnect it, use a hand or socket wrench of the appropriate size to loosen the nut holding the ground cable onto the negative terminal of the battery.
Can a high beam light bulb be blown out on the same side?
If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.