How can I tell if my camshaft sensor is working?
Check the wiring harness for possible damage (broken or shorted wires). The wiring harness should be routed away from the high-tension cable to prevent interference. This procedure will determine if the Camshaft Position Sensor is able to send signal to the ECU.
What causes DTC p0340 camshaft position sensor circuit malfunction?
Another instance DTC P0340 is generated is when there is a problem in the CMPS electronic circuit itself. The CMPS electronic circuit consists of the Camshaft Position Sensor, wiring harness, and the ECU. The problem could be a defective CMPS, open or shorted wire, or defective ECU.
What happens when the camshaft timing pin leaves the sensor head?
When the Camshaft Timing pin comes close to the sensor head, the voltage at the signal wire drops to zero. It rises back to 12 volts when the pin leaves the sensor head. The Camshaft Position Sensor sends this signal to the PCM via the signal wire in the wiring harness (See Fig. 3).
When does the camshaft position sensor rise back to 12 volts?
It rises back to 12 volts when the pin leaves the sensor head. The Camshaft Position Sensor sends this signal to the PCM via the signal wire in the wiring harness (See Fig. 3).
What are the symptoms of a cam sensor problem?
Now, of course, it’s not gonna’ run right. Here are a couple of symptoms that your vehicle is probably experiencing: – P0340 Camshaft Position (CMP) Sensor Circuit. – P0341 Camshaft Position (CMP) Sensor Performance. Your GM mini-van, pick up, or SUV gas mileage is going thru’ the roof (in a negative manner-o’-speaking that is).
Can a faulty camshaft sensor cause a knocking sound?
Question: Can a faulty camshaft sensor cause a knocking sound? Answer: No, a faulty camshaft sensor can’t cause a knocking sound unless it affects ignition timing. Question: Can a faulty camshaft sensor cause a P0300 code? Answer: A number of faulty components may trigger a P0300 code, including: a bad camshaft position sensor
What do you need to know about camshaft position sensor?
The camshaft position sensor (CMP) is just one of the many electrical parts found in a vehicle. We’ll go over what this component is, the symptoms of a bad camshaft position sensor, and what you can expect its replacement cost to be when it’s faulty.
How much does a bad camshaft sensor cost?
In this case, because of an inaccurate reading from a bad camshaft position sensor, more fuel than necessary is injected into the engine which causes your fuel economy to drop. To replace a camshaft position sensor, you can expect to pay anywhere from $120 to $300. Parts alone will run about $50 to $200.