How do you program a key fob for a 2010 Jeep Patriot?
2010 Jeep Patriot
- Insert First Programmed Key. INSERT a working remote head key into the Ignition and TURN it to the ON/RUN position.
- Remove First Programmed Key.
- Insert Second Programmed Key.
- Remove Second Programmed Key.
- Program Remote.
- Program Additional Remote.
- Exit Programming Mode.
- Test Remotes.
How do I remote start my Jeep Patriot?
Remote start your Jeep Patriot with your OEM factory key by pressing the lock button 3x. Your vehicle will run for 20 minutes and when you are ready to leave, just enter the vehicle, buckle up and drive away.
How do you reset the key fob on a Jeep Patriot?
Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, Turn the ignition switch to the LOCK position and remove the first key.
Does a 2010 Jeep Patriot have remote start?
Factory Remote Start for 2010-2016 Compass MK and 2010-2016 Patriot MK. Don’t wait to arrive back at your Jeep to get your vehicle started. Do it from as far as 300 feet away with the Mopar Remote Start available at JustforJeeps.com. The remote start works for the Patriot & Compass models.
Why is the remote start on my Jeep Patriot not working?
The remote start function not operating could be attributed to several things, such as low fuel or door being ajar. Is the remote start system a stock item that came with the Jeep or is it aftermarket? Hello All! Not sure if this is where this question belongs .. so please forgive!
Is there a problem with my Jeep Patriot?
Well, another year, another major problem with the Pat. Two weeks ago, I went out to start it and it wouldn’t start. No crank or anything. Battery is nearly new, all lights lit up brightly, radio worked fine.
What to do if your Jeep won’t start?
With the key in the “start” position, if the starter motor is getting power but the starter doesn’t work, then the starter is condemned and replaced. Note that starters can and do sometimes develop intermittent faults due to bad spots on the armature.
What kind of starter does a Jeep Patriot have?
Im a 2hr drive away from my vehicle and wont get a chance to be back to look at it until tomoro or the next day. Cycle your key 3 times see if it throws a code though. Mine showed p1279 starter circuit 2 open. I spliced into a wire directly at the tipm. Cant remember the colour right now exactly. But it was in the small brown connector.
The remote start function not operating could be attributed to several things, such as low fuel or door being ajar. Is the remote start system a stock item that came with the Jeep or is it aftermarket? Hello All! Not sure if this is where this question belongs .. so please forgive!
Why does my Remote not work on my car?
We have found 10 things that will cause your remote start system to not work. Hit the lock button once, then hold the remote start button (Usually shaped like an arrow ) for at least 2 seconds or until the turn signal lamps flash. Keep holding and the vehicle should start.
What to do if your remote starter is not working?
Disengage and re-engage ‘P’ before you retry the starting procedure. If you have used the remote starter twice in quick succession, it will not work. Simply insert the key in the ignition and turn it ‘on’ and ‘off’. Exit the vehicle with the fob and retry step #1. If your coolant temperature is near C or your oil is low, you need to be topped up!
How do you start a car with a remote start?
Hit the lock button once, then hold the remote start button (Usually shaped like an arrow ) for at least 2 seconds or until the turn signal lamps flash. Keep holding and the vehicle should start. As a safety precaution, the remote start system will only work if the car is in ‘Park’.