How is the kickdown cable attached to the transmission?
From underneath, feed the kickdown cable down to the point where you can reconnect the cable to the linkage on the transmission. It may be necessary to pull the cable out of the housing enough to give yourself a little slack in order to get the kickdown cable end attached. Step 12: Bolt the kickdown cable housing back into the transmission.
When do you need to replace the kick down Cable?
If you feel that your car’s transmission is shifting roughly, too fast, or too slow, you may need to replace the kickdown cable. 1. The transmission shifts hard 2. The car shifts early and fast 3. The transmission shifts slow and late Having an engine and transmission that work harmoniously is critical for efficient driving.
What are the symptoms of a bad kickdown cable?
Symptoms of a Bad or Failing Kickdown Cable 1 The transmission shifts hard. 2 The car shifts early and fast. 3 The transmission shifts slow and late.
Why is my kick down cable so slow?
On the opposite side of the spectrum, a slow or late shifting transmission will also be an indication that a problem with the kickdown cable exists. In this scenario, the kickdown cable is typically stretched and will cause a delay in the shifting process.
How does the transmission kick down cable work?
How the Transmission Kickdown Cable Works. One of the many essential parts of a carbureted or fuel injected vehicle is a transmission kick down cable. The transmission kick down cable works to shift the transmission to a higher gear automatically when the engine is revved or otherwise accelerated.
If you feel that your car’s transmission is shifting roughly, too fast, or too slow, you may need to replace the kickdown cable. 1. The transmission shifts hard 2. The car shifts early and fast 3. The transmission shifts slow and late Having an engine and transmission that work harmoniously is critical for efficient driving.
Symptoms of a Bad or Failing Kickdown Cable 1 The transmission shifts hard. 2 The car shifts early and fast. 3 The transmission shifts slow and late.
On the opposite side of the spectrum, a slow or late shifting transmission will also be an indication that a problem with the kickdown cable exists. In this scenario, the kickdown cable is typically stretched and will cause a delay in the shifting process.
How to set up a frontier wireless router?
Your Frontier wireless router is configured out-of-the-box with its Wi-Fi turned on. Look for your network (or SSID) name and password on a sticker on the back, bottom or side of your router. To personalize your wireless network settings, please select your router brand and model number from the […]
What does the kick down Cable do on an automatic transmission?
Select your preferred location and we’ll note which parts are ready to be picked up TODAY. On certain automatic transmissions with a vacuum modulator (including Powerglide, TH-350, C-4, and C-6), the kickdown cable tells your transmission to shift into a lower gear when you start climbing a hill or passing at highway speed.
What do I need to install kickdown cable?
Install 10-24 Machine Screw & Locknut provided. (see Figure 2B) Bolt on inside of O.E. throttle lever. V-Notch in Throttle Adapter Bracket will interlock into throttle lever & O.E. Cable Stud & Nut is all that is needed to install. Screw & Nut not required.
How to install kickdown cable on a carburetor?
Step 1. Bolt Modified Throttle Lever Adapter to carburetor with original Accelerator Cable Stud & Nut (see Figure 2A) Step 2. Rotate to align Heartshape hole with hole in throttle lever. Install 10-24 Machine Screw & Locknut provided. (see Figure 2B) Bolt on inside of O.E. throttle lever.
How to reinstall throttle cable with kickdown cable?
Push stud back into O.E. throttle bracket hole and reinstall vehicles original throttle cable, reusing O.E. cable clamp and nut. (see Figure 5C) Step 1. With BPE part # 3395]