Why is the instrument cluster on my Jeep Cherokee not working?
Checked the fuses, as well as the hot to the cluster from the fuse and back to the battery. Next plan is the grounds and then the connectors. Not liking this instrument panel
What kind of gauges should I use on my 1999 XJ?
Lol I’m thinking may just go with all aftermarket gauges , speedo and tach…..trace out the indicator lights and do it custom….any thoughts on gauges? I have a 1999 XJ – and the instrument cluster occassionaly stops working — with mine, if you push on it towards the bottom (nearest the odo reset) it will reseat and continue working for months.
When did the Jeep Grand Cherokee come out?
The Jeep Grand Cherokee was redesigned for the 1999 model year; the 2000 models have minimal changes. This model is also known as Jeep WJ. Answered! View the answer I have this problem too Is this a good question? you may want to also consider that your battery has a dead cell and that no amount of charging is going to save that .
Checked the fuses, as well as the hot to the cluster from the fuse and back to the battery. Next plan is the grounds and then the connectors. Not liking this instrument panel
Is the gauge cluster connected to the ECU?
Have the local dealer test your ECU, it is data lines (digital 1 & 0) that send the info to the cluster from the ECU. You can’t easily by-pass the gauge cluster because the ECU interfaces with the cluster.
Why are all the lights on my Jeep Cherokee not working?
The lights work (cel, seatbelt light, air bag, etc) but the actual gauges don’t work. Any ideas of where I should check? All the grounds seem to be connected, and I haven’t made any changes with wiring in regard to the cluster.
Lol I’m thinking may just go with all aftermarket gauges , speedo and tach…..trace out the indicator lights and do it custom….any thoughts on gauges? I have a 1999 XJ – and the instrument cluster occassionaly stops working — with mine, if you push on it towards the bottom (nearest the odo reset) it will reseat and continue working for months.
The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698. All of them have to do with the PCM not communicating with the instrument cluster.
Why does my XJ instrument cluster stop working?
I have a 1999 XJ – and the instrument cluster occassionaly stops working — with mine, if you push on it towards the bottom (nearest the odo reset) it will reseat and continue working for months. This is the second instrument cluster – I replaced the original due to the same issue you are experiencing with a used cluster from eBay $35
The lights work (cel, seatbelt light, air bag, etc) but the actual gauges don’t work. Any ideas of where I should check? All the grounds seem to be connected, and I haven’t made any changes with wiring in regard to the cluster.
Where are the fuses in a Jeep Cherokee?
Here you will find fuse box diagrams of Jeep Cherokee 1997, 1998, 1999, 2000 and 2001, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay. Cigar lighter (power outlet) fuses in the Jeep Cherokee are the fuses #1 and #2 in the Instrument panel fuse box.
What to do if your instrument cluster is not working?
Side note: NO work has been done on the XJ since the XJ last ran without issue, and that was a week ago. Maybe try and disconnect the battery to clear the pcm?
Why is the CPS on my Jeep Cherokee not working?
According tothe All Data the white w/ double black trace and the purple with brown trace wires are communication wires that go back to the PCM. Again, another reason why I don’t think that the CPS is bad.
The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698. All of them have to do with the PCM not communicating with the instrument cluster.
How to reset the instrument cluster in a car?
Leave it in the 0 or I position. Push and hold the Sel/Reset knob (on the instrument panel by the fuel gauge), or the Sel/reset button on the right hand of the steering wheel below the Multi-Information Display Info button. Turn the headlights ON. Turn the ignition switch to ON (position II). Some of the instrument lights will come on.
I have a 1999 XJ – and the instrument cluster occassionaly stops working — with mine, if you push on it towards the bottom (nearest the odo reset) it will reseat and continue working for months. This is the second instrument cluster – I replaced the original due to the same issue you are experiencing with a used cluster from eBay $35
How to initiate the instrument cluster self-test?
Within five seconds, and still holding in the Sel/Reset button, turn the headlights OFF, then ON, then OFF again. Within 5 seconds, release the Sel/reset button. Push and release the Sel/reset button button 3 times repeatedly. The instrument cluster begins its self-test.
Why are the instrument cluster lights not turning off?
The instrument cluster lights wont turn off after the truck is turned off and doors locked. It will stay on all night draining the batteries. i tried disconnecting the batteries and when i reconnect the batteries the problem persists.
Are there any problems with the Jeep Grand Cherokee?
Jeep Grand Cherokee owners have reported 27 problems related to dashboard failed (under the electrical system category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jeep Grand Cherokee based on all problems reported for the Grand Cherokee.
What happens when the speedometer on a Jeep Grand Cherokee stops working?
One of the most inconvenient things that can happen to your Grand Cherokee is when the speedometer stops working. You don’t really realize how much you look at the thing until it’s just always sitting at 0 MPH while driving down the road.
When did my Jeep Grand Cherokee dashboard fail?
Placed vehicle in part, restarted and drove 1. 5 miles home. 15 July 2015 I called around noon to make an appt at dealership to have problem diagnosed, made appt for Monday 20 july2015 at 7am. A few hours later when I was leaving work I get in the vehicle and it takes 3 attempts before it starts it died almost immediately.
One of the most inconvenient things that can happen to your Grand Cherokee is when the speedometer stops working. You don’t really realize how much you look at the thing until it’s just always sitting at 0 MPH while driving down the road.
What is the ECU on a Jeep Grand Cherokee?
ECU – Your Grand Cherokee’s Engine Control Unit (ECU for short) is the computer that takes all of the information that the vehicle sensors compile and uses it to control the vehicle systems, and sends important vehicular telemetry data to the driver via the instrument cluster.
If the instrument cluster doesn’t work, first determine which gauges don’t operate or if the whole cluster is down. I like to start testing with the printed circuit board self test. Check your manual for the proper procedure, as they may vary somewhat. 1. Put the key in the unlock position, the next position up from lock.
What to do if your Jeep instrument is off?
If all the modules are unplugged and the BUS voltage is still off, separate the connector near the instrument cluster to test the BUS voltage straight out of the printed circuit board. If the voltage returns to normal, there’s a problem with the wiring harness.
What kind of bus does a Jeep Wrangler use?
The same two-wire CCD BUS that Chrysler has been using for years on its cars is now being used on Jeeps and trucks, giving today’s Jeep Wrangler a new level of sophistication. On these vehicles, the BUS bias voltage is produced by the printed circuit board or instrument cluster.
If the instrument cluster doesn’t work, first determine which gauges don’t operate or if the whole cluster is down. I like to start testing with the printed circuit board self test. Check your manual for the proper procedure, as they may vary somewhat. 1. Put the key in the unlock position, the next position up from lock.
If all the modules are unplugged and the BUS voltage is still off, separate the connector near the instrument cluster to test the BUS voltage straight out of the printed circuit board. If the voltage returns to normal, there’s a problem with the wiring harness.
The same two-wire CCD BUS that Chrysler has been using for years on its cars is now being used on Jeeps and trucks, giving today’s Jeep Wrangler a new level of sophistication. On these vehicles, the BUS bias voltage is produced by the printed circuit board or instrument cluster.
Why is the Speedo cable on my Jeep Cherokee not working?
No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector? okay well im out of answers. No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector?
Why are the mileage gauges on my Jeep Cherokee not working?
Every once in a while when driving the airbag light turns on and the gauges do not work. When this happens the mileage does not record. We found out that by hitting the horn lightly two times the gauges will work again. Not a big deal, but annoying. The gauges on the dashboard sometimes don’t work.
What’s the problem with my 1998 Jeep Cherokee?
No one has added a helpful site for this 1998 Cherokee problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: After the dealer fixed the problem for the recall on the airbag module problem, the airbag light stays on and gauges and odometer work intermittently. The gauges are not working 80% of the time.
Why are all the gauges on my GM Truck not working?
Last night I was comin home from the store and realized my speedometer wasn’t working (ins’t the first time) so i hit the dash, then realized NONE of the gauges were working.. Gas gauge, almost empty. Water temp, cold. No oil pressure. The alt wasn’t charging. No tac and no speedometer.
Why does the instrument cluster shut off intermittently while driving?
The batt light goes on and the entire instrument cluster (spedo fuel turbo temp etc ) shuts off .. when it’s off the climate control won’t work and the sun roof won’t work . Sometimes the abs light comes on before it shuts off. Turns on and off intermittently. I’ve checked fuses and cleaned battery connections and ground connections .. please help
Is there a problem with my 2000 Jeep Grand Cherokee?
No one has added a helpful site for this 2000 Grand Cherokee problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: Search CarComplaints.com for these popular complaint phrases…
Can a check engine light be removed from an instrument cluster?
The cluster acts like a mini-BCM, there will be no easy way to drive a check engine light if you remove the cluster, if you need the check engine light for IM test you will be in trouble, not to mention the fact that you will not know when you have an ECU problem.
When to replace the gauge cluster on a Jeep Cherokee?
This video shows the process for replacing a Jeep Cherokee instrument cluster / gauge cluster and correcting the mileage. This process can also be used for upgrading from the idiot light cluster to the full gauges. This procedure applies to all 1997-2001 Jeep Cherokees (XJ). This procedure should also apply to 1997-2001 Jeep TJ Wranglers.
When to do odometer correction for Jeep Cherokee?
This process can also be used for upgrading from the idiot light cluster to the full gauges. This procedure applies to all 1997-2001 Jeep Cherokees (XJ). This procedure should also apply to 1997-2001 Jeep TJ Wranglers. This procedure may work for 2007+ Jeep Wrangler JK. Loading…
Why is my instrument cluster not working on my Jeep XJ?
Went to start the XJ last night to load it onto the trailer to move it to my buddy’s shop and it would start, run for 3-4 seconds and then shut off. The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698.
How to correct the mileage on a Jeep Cherokee?
https://www.youtube.com/user/COrobotc… This video shows the process for replacing a Jeep Cherokee instrument cluster / gauge cluster and correcting the mileage. This process can also be used for upgrading from the idiot light cluster to the full gauges. This procedure applies to all 1997-2001 Jeep Cherokees (XJ).
The cluster acts like a mini-BCM, there will be no easy way to drive a check engine light if you remove the cluster, if you need the check engine light for IM test you will be in trouble, not to mention the fact that you will not know when you have an ECU problem.
Have the local dealer test your ECU, it is data lines (digital 1 & 0) that send the info to the cluster from the ECU. You can’t easily by-pass the gauge cluster because the ECU interfaces with the cluster.
Side note: NO work has been done on the XJ since the XJ last ran without issue, and that was a week ago. Maybe try and disconnect the battery to clear the pcm?
According tothe All Data the white w/ double black trace and the purple with brown trace wires are communication wires that go back to the PCM. Again, another reason why I don’t think that the CPS is bad.
Can a Ford F150 gauge cluster be repaired?
The Ford… This is a complete instrument cluster rebuild of the Ford F150 gauge cluster that will correct the LCD odometer and “red brake light” issues for 2004, 2005, 2006, 2007, and 2008 Ford F150 trucks. Issues we repair on your…
Is there a Ford Explorer instrument cluster repair?
This is a repair service for a 2006, 2007, 2008, 2009 and 2010 Ford Explorer instrument cluster that is experiencing intermittent power to all the gauges, or issues with individual gauges. Common issues found with these…
When do you need an instrument cluster repair?
This is a Ford E-Series (E-150, E-250, E-350, E-450, E-550) instrument cluster repair service for 2004 – 2007 vehicles. The Ford E-Series instrument cluster is also commonly referred to as the instrument panel, dash… This is a Ford E-Series (E-150, E-250, E-350, E-450, E-550) instrument cluster repair service for 2008 year model vehicles.
Is there a problem with the Ford F250 instrument cluster?
This repair service corrects Ford Super Duty F250 and F350 instrument cluster problems on year models 2011, 2012, 2013, 2014, 2015, and 2016. These instrument clusters have a common problem with the: LCD odometer… This is a rebuild service for the instrument cluster on 2002 – 2005 Ford Excursion vehicles.
How to repair GM instrument cluster you speedometer?
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: gEkQxckitdPl441V)
No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector? okay well im out of answers. No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector?
How do you change the gauge cluster on a jeep?
1. Remove the dash. There are four Phillips head screws, all facing up. There are also some clips around the dash, including by the radio, and the heater vent on the right. Go around and pull straight out. If you have a ’95 or newer, you also need to remove the steering column cover to remove the dash bezel. To do that you need a T15 Torx driver.
How much does a XJ gauge cluster cost?
The ’97–’01 XJs also use an electronic setup, however it is a completely different style from the previous years. I got my gauges from a local scrap yard for $50. This is a pretty good price; they usually go for $75-$100. You can buy them new, however they are rather expensive.
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: gEkQxckitdPl441V)
Why is the PCM on my Jeep Cherokee not working?
I did notice that I have a wire (white with double black trace) that is cut, but after pulling the entire harness out I don’t see another end of that wire anywhere. According tothe All Data the white w/ double black trace and the purple with brown trace wires are communication wires that go back to the PCM.
I did notice that I have a wire (white with double black trace) that is cut, but after pulling the entire harness out I don’t see another end of that wire anywhere. According tothe All Data the white w/ double black trace and the purple with brown trace wires are communication wires that go back to the PCM.
Is there an electrical problem with my Grand Cherokee?
I have been experiencing random electrical problems. The symptom is that the all the lights and gauges on the dash cluster go on and off erratically and sometimes stay off for a few minutes. This also includes the A/C system. As the gauges go off so does the A/C fan.
Why does my Grand Cherokee have intermittent failure?
May just have to go the legal route, sad to say. To spend that much money, in earnest, on a repair and to be back at the same place I started is unacceptable. Lately, one of the symptoms is that the intermittent failure is triggered by bumps in the road, bumps from road lane reflectors, etc.
Why do the lights go off on my Jeep Grand Cherokee?
The symptom is that the all the lights and gauges on the dash cluster go on and off erratically and sometimes stay off for a few minutes. This also includes the A/C system. As the gauges go off so does the A/C fan. I have taken the Jeep to the dealer now going on 5 or more times and quite frankly, they are stumped.
How to test fuel pump in Jeep Cherokee?
Use a circuit tester and test the harness side for power as your helper turns the key on and off. Remember that there will be power for only 2 seconds, so have your helper cycle the key on and off as you check the terminals, allowing 5 seconds between cycling for the computer to reset.
Why does my 2002 Jeep Grand Cherokee not start?
SOMETIMES VEHICLE (2002 JEEP GRAND CHEROKEE) WON’T START. YOU GET NOTHING WHEN YOU HIT THE KEY, NO CLICKING, NO NOTHING. YOU MAY GO BACK LATER AND IT WILL START. GAUGES GO CRAZY. WILL COME ON. ODOMETER AND CLOCK WILL FLASH. SOMETIMES SPEEDOMETER WILL GO FROM 60 TO ZERO AND BACK. WILL NOT LOSE POWER THOUGH.
Why does my Jeep gauges go crazy with the key off?
JUST NOTICED THAT WITH KEY OFF IF YOU HIT THE WINDSHIELD WIPERS THAT GAUGES WILL MOVE. JEEP DEALERSHIP CAN’T FIGURE IT OUT AND NEITHER CAN MY MECHANIC. MECHANIC THINKS ITS A ELECTRIC PROBLEM? WHAT ABOUT IGNITION? OBVIOUSLY THERE MUST BE SOME JUICE GETTING TO GAUGES WITH KEY OFF. ALSO, JEEP IS IN WON’T START MODE NOW.
What does no bus mean on a jeep?
The reply stating that the battery was just changed makes me more suspicious that this is the cause. The no bus syndrome on the jeeps. Had one in the shop a no start with the fuel and amp gauge not working. The no bus signal on the odom.
What kind of CCD bus does Jeep use?
The same two-wire CCD BUS that Chrysler has been using for years on its cars is now being used on Jeeps and trucks, giving today’s Jeep Wrangler a new level of sophistication. If the instrument cluster doesn’t work, first determine which gauges don’t operate or if the whole cluster is down.
The same two-wire CCD BUS that Chrysler has been using for years on its cars is now being used on Jeeps and trucks, giving today’s Jeep Wrangler a new level of sophistication. If the instrument cluster doesn’t work, first determine which gauges don’t operate or if the whole cluster is down.
How is the bus bias voltage produced on a jeep?
On these vehicles, the BUS bias voltage is produced by the printed circuit board or instrument cluster. As with all CCD BUS circuits, the wires are twisted together in the wiring harness with 2.5 volts on each wire.
Is the PCI bus on my Jeep Grand Cherokee?
I have a 2000 WJ V8 Grand Cherokee Ltd. It has suffered recently from the dreaded PCI bus issue with the usual gauges all dead, all trouble lights up, power windows not working etc. Have checked all connectors, wiring to doors, battery tested etc.
Why is my PCI bus gauge not working?
It has suffered recently from the dreaded PCI bus issue with the usual gauges all dead, all trouble lights up, power windows not working etc. Have checked all connectors, wiring to doors, battery tested etc.
I have a 2000 WJ V8 Grand Cherokee Ltd. It has suffered recently from the dreaded PCI bus issue with the usual gauges all dead, all trouble lights up, power windows not working etc. Have checked all connectors, wiring to doors, battery tested etc.
Where to test the PCM on a Jeep Wrangler?
3-Test for reference voltage (5v) coming out of the PCM at pin 17 ( orange wire) at the black connector and pin 31 (violet/orange wire) at the white connector. If the power input leads and grounds are good, but nothing is coming out of the two reference leads, then the PCM is smoked. Period.
What are the features of a 1999 XJ Cherokee?
The XJ Cherokee in the article is our 1999 Cherokee Sport 4-door with power windows, power door locks, power mirrors and remote keyless entry (RKE). The passenger side front door module is the “brains”, containing both relays and switches. A quote from Chrysler helps:
Is the O2 sensor on a Jeep Wrangler NTK?
Hopefully the O2 sensors are NTK and not Bosch which is known to cause problems in our Jeeps. I’m having some problem as fireman posted earlier in the thread. Don’t have power to pin 2 orange wire. Have power to all fuses in fuse block.
Are there CD’s in a 98 Jeep Grand Cherokee?
( South Australia) Most manuals show this info but have only got wrangler and cherokee CD’s not Grand cherokee 98 !!!! Also, most diagrams show 2 ground terminals and mine reads as if there is no earth.
What are the indicators on a grandcherokee instrument cluster?
I HAVE left and right indicators, one (fused at kisk panel fuse group OK ) constant 12 volts one 12 volt ign.start run, one dimmer control terminal, and 2 terminals reading 2.5 volts approx , assume these are the “bus” lines. WHAT are the others and does any one know how to check out the new cluster to make sure it is the correct one ????
How many miles does a Jeep Grand Cherokee have?
I own a 06 Jeep Grand Cherokee laredo….does anybody else experience a short in the turn signal stem which causes the instrument lights and clock on the radio to flicker?? My 99 Jeep Grand Cherokee has over 211,000 miles and most people think it’s a 2004 because “IT LOOKS SO GOOD”, but in the last couple of years it has been posessed.
Why does my car’s instrument cluster stop working?
Sensors in the vehicle generate signals that send to the car’s computer. The computer converts them into something that can be read by the instrument cluster. If one doesn’t work, such as the speedometer, how can you tell if it’s a problem with the entire instrument cluster or something else?
How is the instrument cluster display on a Jeep Gladiator?
[Text On Screen] Styles may vary. [Voice Over] Your instrument cluster display provides important information about systems and features. It also lets you customize a whole range of preferences. You’ll find it on the instrument panel. Use the steering wheel controls to browse the menus and submenus. Push the up and down arrow buttons to scroll.
Where do I find the instrument cluster display?
[Voice Over] Your instrument cluster display provides important information about systems and features. It also lets you customize a whole range of preferences. You’ll find it on the instrument panel. Use the steering wheel controls to browse the menus and submenus. Push the up and down arrow buttons to scroll.
How can I tell if my instrument cluster is bad?
If all the modules are unplugged and the BUS voltage is still off, separate the connector near the instrument cluster to test the BUS voltage straight out of the printed circuit board. If the voltage returns to normal, there’s a problem with the wiring harness. If it doesn’t, a bad instrument cluster is the problem.
Where is the instrument cluster on a car?
The instrument cluster, or digital dash, provides the driver with important information necessary for a safe driving experience. It is located on the driver’s dashboard and includes the speedometer, fuel gauge, and odometer. In some cases, though, it stops working. What causes the instrument cluster to stop working?
( South Australia) Most manuals show this info but have only got wrangler and cherokee CD’s not Grand cherokee 98 !!!! Also, most diagrams show 2 ground terminals and mine reads as if there is no earth.
What kind of Lights does a Jeep Grand Cherokee have?
All the lights (Check engine, transmission, abs, auto traction, etc, etc, etc) in my 2006 Jeep Grand Cherokee 4.7 Laredo’s instrument panel suddenly went on and off twice while driving (First time ever)…. And then the auto traction light as well as the ESP/BAS lights stayed on…
Why are all lights in the instrument panel suddenly disappearing?
It was causing some REALLY weird things to happen: dash lights flickering, seat heaters wouldn’t work for 2 to 3 minutes after a start, then the things I described above started happening. Changed the battery 6 months ago, everything disappeared!!! Hope this helps! Thanks, it still has not done it again, so hopefully it was some small glitch…
All the lights (Check engine, transmission, abs, auto traction, etc, etc, etc) in my 2006 Jeep Grand Cherokee 4.7 Laredo’s instrument panel suddenly went on and off twice while driving (First time ever)…. And then the auto traction light as well as the ESP/BAS lights stayed on…
It was causing some REALLY weird things to happen: dash lights flickering, seat heaters wouldn’t work for 2 to 3 minutes after a start, then the things I described above started happening. Changed the battery 6 months ago, everything disappeared!!! Hope this helps! Thanks, it still has not done it again, so hopefully it was some small glitch…
Why did the rev meter die in my Jeep?
Damn, it did it again, this time the rev meter died too, pulled over to the side of the road and restarted the jeep, everything was fine afterwards. Just a note, this has happened twice now, 2-3 minutes after taking off from work, both days very sunny and hot suddenly.
How do you remove a heat lamp from a jeep?
Using a flat screwdriver unclip the clamshell plastic housing and then remove the control board. You will see the three burned out lamps on the face of the board, using a pair of pliers grab them at the plastic base and gently twist, they come off very easy.
Using a flat screwdriver unclip the clamshell plastic housing and then remove the control board. You will see the three burned out lamps on the face of the board, using a pair of pliers grab them at the plastic base and gently twist, they come off very easy.
Why are all of my gauges not registering?
The sending unit wire could be bad or broken, or the circuit from the gauge to the sender is incomplete. Without a ground, the gauge will not register. It is highly unlikely that all the sender units are bad, so we can rule that out. Of course, it is also possible that all the gauges are malfunctioning.
No one has added a helpful site for this 2000 Grand Cherokee problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: Search CarComplaints.com for these popular complaint phrases…
When did the Jeep Grand Cherokee ZJ come out?
In this article, we consider the first-generation Jeep Grand Cherokee (ZJ) after a facelift, produced from 1996 to 1998. Here you will find fuse box diagrams of Jeep Grand Cherokee 1996, 1997 and 1998, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
The instrument cluster, or digital dash, provides the driver with important information necessary for a safe driving experience. It is located on the driver’s dashboard and includes the speedometer, fuel gauge, and odometer. In some cases, though, it stops working. What causes the instrument cluster to stop working?
Why is my BCM not working on my Jeep Cherokee?
Should your voltage regulator work just fine, then chances are the issue is caused by a fault with wiring – one of the two causes leading to a fully non-working instrument panel. This fact is especially true for a 2000 Jeep Cherokee, whose wires tend to rub through on the steering column that causes a short with the BCM.
Where does the Jeep Cherokee XJ come from?
Indonesia: Pademangan, North Jakarta (PT. Indonesian Swedish Manufacturing Company) The Jeep Cherokee (XJ) is a compact sport utility vehicle manufactured and marketed across a single generation by Jeep in the United States from 1983 to 2001 — and globally through 2014.
What are the problems with my Jeep Laredo?
I am having problems with my 2000 jeep grand cherokee laredo. It shakes horribly like the steering wheel wants to go off by itself but most importantly i have had an issue with it heating up for the past 2 years.
Why is the dome light off on my Jeep Laredo?
I have looked outside at night and my dome light is on. Jeep is off has been off for several hours. It is a 1997 Grand Cherokee Laredo. Lights are off doors are all securely shut. What is my problem?
I own a 06 Jeep Grand Cherokee laredo….does anybody else experience a short in the turn signal stem which causes the instrument lights and clock on the radio to flicker?? My 99 Jeep Grand Cherokee has over 211,000 miles and most people think it’s a 2004 because “IT LOOKS SO GOOD”, but in the last couple of years it has been posessed.
I am having problems with my 2000 jeep grand cherokee laredo. It shakes horribly like the steering wheel wants to go off by itself but most importantly i have had an issue with it heating up for the past 2 years.
Why are the gauges on my Jeep YJ not working?
It is not that uncommon for Jeep Wrangler YJ dash gauges to go out and the fix can be fairly easy…. if you can find the problem. I show the steps I went through on how to fix the gauges on my 1994 Jeep wrangler YJ. 2: Cleaning the ground wires on the engine. 3: Removing the instrument cluster to check the connection of the gauges.
ECU – Your Grand Cherokee’s Engine Control Unit (ECU for short) is the computer that takes all of the information that the vehicle sensors compile and uses it to control the vehicle systems, and sends important vehicular telemetry data to the driver via the instrument cluster.
Is there a problem with my Jeep Grand Cherokee dashboard?
The contact owns a 2009 Jeep Grand Cherokee. While driving 25 mph, the electronic dashboard failed without warning. The vehicle was taken to a dealer where it could not be diagnosed. The failure recurred on several occasions. The manufacturer was not made aware of the failure.
What kind of problem does a 2005 Jeep Grand Cherokee have?
Tl-the contact owns a 2005 Jeep Grand Cherokee. The contact stated while driving 70 mph, the dash panel started flashing and the gauges went out and the vehicle stopped. The vehicle started and the contact was able to get home. The contact stated that the ignition switch went out.
Why are my power locks not working on my Jeep?
There is a combination flasher unit under the drivers side dash, but it acts for turn signals as well hazard lights. It is an electronic controlled relay, so maybe the problem is in there. If it was wire related, the problem should be there for the hazard lights as well.
What are the features of a Jeep Grand Cherokee?
The rear of the Jeep® Grand Cherokee features larger taillamps with signature LED lighting, a larger rear spoiler to aid in aerodynamics, resculpted tailgate that offers greater rear visibility and shark-fin style roof-mounted aerial. The lower rear fascia is now model-specific and dual exhaust tips are standard on Limited and Overland models.
What should my Jeep Cherokee be running at?
210 is the normal operating temp for these. If it’s dropping a bit lower you may have a sticky thermostat. It wouldn’t be a bad idea to swap those anyways if they haven’t been done yet. How long has it been since the coolant was flushed. I haven’t flushed it since I bought it last year and before then I have no idea.
When did the Jeep Cherokee XJ come out?
The Jeep Cherokee (XJ) is a compact SUV that was manufactured and marketed by Jeep from 1997 to 2001. Sharing the name of the original full-size SJ model, but without a traditional body-on-frame chassis, the XJ instead featured a light-weight unibody design. Idle problem remains a odd frustrating headache after much work.
I HAVE left and right indicators, one (fused at kisk panel fuse group OK ) constant 12 volts one 12 volt ign.start run, one dimmer control terminal, and 2 terminals reading 2.5 volts approx , assume these are the “bus” lines. WHAT are the others and does any one know how to check out the new cluster to make sure it is the correct one ????
Is there a wiring diagram for a Jeep YJ?
The PDF includes ‘body’ electrical diagrams and Jeep YJ electrical diagrams for specific areas like: air conditioning units, typical jeep charging unit wiring diagrams, typical emission maintenance reminder wiring diagrams, front end lighting wiring diagrams and switches, heaters and ignition wiring diagrams.
Are there any wires under the dash of a Jeep Wrangler?
That really only leaves a few wires under the dash to worry about. Usually there is : 1) power – solid red is a good guess, remember it will only work if the ignition is on (well, that is if your power source is pulled from the ignition or not.
What do you do when your instrument cluster doesn’t work?
Also when you drive the car, the speedometer and the rpm gauge doesn’t move. Everything light wise works. Everything works except the rpm, speedometer, temperature and gas gauge. All fuses and relays are good. I’ve even changed the instrument cluster and the BCM. Still none of the gauges work.
It is not that uncommon for Jeep Wrangler YJ dash gauges to go out and the fix can be fairly easy…. if you can find the problem. I show the steps I went through on how to fix the gauges on my 1994 Jeep wrangler YJ. 2: Cleaning the ground wires on the engine. 3: Removing the instrument cluster to check the connection of the gauges.
Why are the warning lights on my Jeep Cherokee not working?
It is also a probable cause if your Jeep Cherokee warning lights are not working and should be inspected first before concluding that your warning lights need new bulbs. To verify, access the fuse box in the engine compartment under the driver’s side dash, or refer to your owner’s manual for its exact location.
If all the modules are unplugged and the BUS voltage is still off, separate the connector near the instrument cluster to test the BUS voltage straight out of the printed circuit board. If the voltage returns to normal, there’s a problem with the wiring harness. If it doesn’t, a bad instrument cluster is the problem.
The contact owns a 2009 Jeep Grand Cherokee. While driving 25 mph, the electronic dashboard failed without warning. The vehicle was taken to a dealer where it could not be diagnosed. The failure recurred on several occasions. The manufacturer was not made aware of the failure.
Why does my Jeep Wrangler not have a dashboard?
Chrysler’s versions are NOT adjustable (cheaper) and that is why we are having these issues. This issue has been mentioned for most Jeep vehicles, including Grand Cherokee and Wrangler. I assume the terminal/post connection is loosened from offroading, so if you wheel a lot, be sure to keep an eye on it.
What to do if your Jeep Grand Cherokee has electrical problems?
THE AUTO ELECTRICIAN JUST RESET THE POWER TO THE SWITCH FOR THE ELECTRIC WINDOWS. THIS HAS THEN RESET THE COMPUTER AND IT IS ALL WORKING NOW. CHECK ALL YOUR WIRES TO MAKE SURE YOU DONT HAVE A LOOSES CONNECTION. I have a 2006 Jeep Grand Cherokee that I bought from a dealer. It has about 45000 miles on it. Runs great.
What was the problem with my Jeep Grand Cherokee?
The dealer finally delivered the Jeep on Monday, 10/13 in the early pm, fixed, said the computer check was negative, tech. traced problem to two bent prongs on a wiring harness connector, straightened them out, billed me $518.00.
Why is my speed ODM not working on my Dodge Dakota?
I have a 2000 dodge dakota 3.9L. The instrument cluster is not working for it. I had replaced the cluster 4 different times. Contacted the dodge dealership and made sure the cluster was the right part number i have. Which it is. I had replaced the fuse for the cluster and cleaned the connections.
When does a Jeep Grand Cherokee battery drain?
Jeep Grand Cherokee Questions – Battery drains when jeep is not started for a few days and have to rec… – CarGurus If I do not drive my Jeep every day the battery drains and has to be recharged.
When do the lights go off in a Jeep Grand Cherokee?
When driving at night or when lights must be used during day light hours the lights in the cluster panel go out and come back on or dim and the return to their original brightness. When the turn signal “stalk” is puled in or pushed in everything is ok for a few miles. Also, once in a while dashboard lights go off and on and chimes go off and on.
Why is the media screen on my Jeep Cherokee black?
I started vehicle this morning to find a a vertical rectangular white block in the middle of the media screen, it then turned black. It prohibits viewing of the entire screen nothing in owners manual.
Why are the lights on my Jeep Cherokee going black?
The instrument cluster (dashboard, radio screen display, and gear shift lights) go black or dark grey, and we have nothing displayed – speedometer, gas gauge, climate controls, messages, or any other safety information. We are just driving along, and the instrument cluster just quits working.
I started vehicle this morning to find a a vertical rectangular white block in the middle of the media screen, it then turned black. It prohibits viewing of the entire screen nothing in owners manual.
I have been experiencing random electrical problems. The symptom is that the all the lights and gauges on the dash cluster go on and off erratically and sometimes stay off for a few minutes. This also includes the A/C system. As the gauges go off so does the A/C fan.
What causes the dash cluster to go out?
The dash cluster itself may also have gone out. This runs in order with a lot of wiring to other accessories, and may cause the others to fail. These connections to the instrument cluster also can come loose. You may want to check the terminals and make sure they are in good working order.
What is a wiring diagram for a Jeep Grand Cherokee?
A wiring diagram is usually made use of to fix problems and to make certain that all the links have been made as well as that whatever exists. 1997 jeep grand cherokee wiring diagram – 1997 Jeep Grand Cherokee Wiring Diagram Fresh Diagram 2002 Jeep Grand Cherokee Wiring Diagram.
How to diagnose electrical issues in a Jeep Cherokee?
Engine Bay schematic showing major electrical ground points for 4.0L Jeep Cherokee engines. Jeep Cherokee Electrical – Diagnosing Er… Fuse box and relay diagram for 2001 Cher… I am hoping someone has a diagram for the Fuse Boxand relays for a 2001 Jeep Cherokee Sport 4×4. Thanks Jeep Cherokee Electrical – Diagnosing Er…
What are the electrical ground points on a Jeep Cherokee?
Engine Bay schematic showing major electrical ground points for 4.0L Jeep Cherokee engines. Jeep Cherokee Electrical – Diagnosing Er… Fuse box and relay diagram for 2001 Cher…
Where to buy Jeep Cherokee parts and accessories?
For more information go to www.P65Warnings.ca.gov. Shop for Jeep Cherokee Parts and Accessories at CarParts.com Jeep Cherokee: Commonly Replaced Parts Jeep Cherokee Aftermarket Parts Why Buy Jeep Cherokee Parts Online from CarParts.com? The Jeep Cherokee is a well-built vehicle with off-road features and capabilities.
What to look for in a Jeep Cherokee?
Start shopping by entering your Cherokee’s model year into our vehicle selector. This will help narrow down your search to components compatible with your vehicle. Consult your mechanic or read through your owner’s manual to get the exact specifications of the part you’re looking for.
What causes no bus signal on Jeep Wrangler?
This not so rare “No Bus” signal and gauge “drop-off” occurs, unexpectedly, on several Jeep models, including XJ Cherokees and TJ Wranglers from the OBD-II era. According to Chrysler’s TSB #08-15-99, the cause on the XJ Cherokee, TJ Wrangler and other models is a defective wire plug.
What to do if your Cherokee says no bus?
Our Cherokee did not manifest a “No Bus” or tachometer, speedometer and gauge drop-off until 130K miles of service. You might try the unplug, clean the contacts as described in the TSB, and reinstall the panel without doing the plug change.
How many amps does a Jeep Cherokee have?
Jeep Cherokee (XJ) 1997 – 2001 Fuse & Relay Information 21 15 Amp Horn (s) 22 20 Amp Rear wiper switch & motor 23 10 Amp Right side marker, turn, parking and tai 24 – – – Spare Fuse
Is there a two door version of the Jeep Cherokee?
Both two- and four-door versions of the XJ Cherokee were offered throughout its lifetime, each having exactly the same track and wheelbase measurements. Two-door models, however, received longer doors and front seats that could fold forward to assist in rear passenger entry and exit.
Is the 1995 Jeep Cherokee a good car?
I bought my ’95 Jeep Cherokee 9 months ago and I love it. It’s built like a tank, nothing delicate about it, but it drives great. It pulls away very quick, really comfortable (in the front at least) and I like the look of it. The interior layout wasn’t really thought through, but I know my way around it now so that’s not a problem.
What causes no start on a jeep 4.0L?
Updated: 29 June 2019. Article Id: 420. A no start condition, on your 4.0L Jeep, is usually caused by a lack of fuel, or a lack of spark, or a lack of air (generally engine compression).
What kind of engine does a Jeep Cherokee have?
The new HO engine replaced the older 177 hp version of the 4.0 L engine in all installations. The Cherokee was also made in right hand drive format, initially for the United States Postal Service.
What does the Dashboard Light on a jeep mean?
This dashboard light blinks on your Jeep Grand Cherokee dashboard to indicate that you may not firmly close the door of your Cherokee. So make sure to shut all the doors adequately. This dashboard light illuminates your Jeep Grand Cherokee Instrumental cluster to notify the engine coolant temperature dropping in your Cherokee.
What does the park light on a Jeep Grand Cherokee mean?
This light activates on your Jeep Grand Cherokee when the transmission fluid temperature is running hot. In this situation, Safely stop your car and switch it into PARK mode. This light activates on your Jeep Grand Cherokee instrument cluster to notify you that a vehicle is coming towards your car.
Jeep Grand Cherokee’s additional features come out with many high technologies that include vehicle Security system, cruise control system, ABS, electronic stability control sensors, and several more that enhance the technicality of this model.
Where can I buy a new Jeep instrument cluster?
Search our inventory to get started, or order by phone at 1-800-590-2716 , we’re happy to help! Known for making quality vehicles that you’ll own for years, Jeep is one of the top car companies found on the road.
Why does my speedometer not work with a new sensor?
Had check engine light come on. Ran codes came up with p1692 speedo sensor. Put new sensor and still speedometer will not work. Any suggestions please. I dont want to buy a new pcu unless I have to.
What does an instrument cluster on a car do?
An instrument clusteris the collection of gauges, dials and lights right above the steering wheel that tell you what’s going on in your vehicle. Generally, your car’s instrument clusterwill last the lifetime of the car and you’ll never have a problem with any of them.
What does the check gauge light mean on a Jeep Grand Cherokee?
If your “Check Gauges” light is on, the light means pretty much whay it says…CHECK GAUGES! One or more of your gauges is/are reading outside of normal operating range.
This dashboard light blinks on your Jeep Grand Cherokee dashboard to indicate that you may not firmly close the door of your Cherokee. So make sure to shut all the doors adequately. This dashboard light illuminates your Jeep Grand Cherokee Instrumental cluster to notify the engine coolant temperature dropping in your Cherokee.
What does the warning sign on the Jeep Grand Cherokee mean?
This warning symbol illuminates your Jeep Grand Cherokee to notify you about the airbag sensors’ technical defect. It indicates that these sensors are not blowing well. So, we endorse you once to inspect your Cherokee at the Jeep service centre.
This light activates on your Jeep Grand Cherokee when the transmission fluid temperature is running hot. In this situation, Safely stop your car and switch it into PARK mode. This light activates on your Jeep Grand Cherokee instrument cluster to notify you that a vehicle is coming towards your car.
Where is the instrument cluster on a jeep?
Your instrument cluster display provides important information about systems and features. It also lets you customize a whole range of preferences. You’ll find it on the instrument panel. Use the steering wheel controls to browse the menus and submenus. Push the up and down arrow buttons to scroll.
This warning symbol illuminates your Jeep Grand Cherokee to notify you about the airbag sensors’ technical defect. It indicates that these sensors are not blowing well. So, we endorse you once to inspect your Cherokee at the Jeep service centre.
What kind of Relay does a Jeep Grand Cherokee use?
APPLIES TO: This Auto Shut Down (ASD) relay circuit wiring diagram applies to the following vehicles: 1993, 1994, 1995 4.0L Jeep Grand Cherokee. ASD relay troubleshooting notes: The auto shut down (ASD) relay gets power from fuse #6 (15 Amp) and fuse #2 (20 Amp) of the Power Distribution Center (PDC).
Are there any problems with the Jeep Cherokee?
Jeep Cherokee owners have reported 140 problems related to engine shut off without warning (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jeep Cherokee based on all problems reported for the Cherokee.
Jeep Cherokee owners have reported 140 problems related to engine shut off without warning (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jeep Cherokee based on all problems reported for the Cherokee.
How many times has my Jeep Cherokee engine shut off?
Incident has happened four times now at speeds of 45mph , 20mph, 25mph, and 10mph. I drive a 2019 Jeep grand charokee latitude. I approached a stop light last month at a major intersetion and the engine shut off.
What is the ignition switch on a Jeep Cherokee?
Ignition Switch – Back-up Lamps, A/C Relay Coil, Shift Selector, Speed Control, Aux. Cooling Fan Relay Coil WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
Which is Jeep has the best wiring diagram?
Jeep Grand Cherokee LaredoJeep Grand Cherokee PartsJeep Cherokee SportCherokee FoodCherokee TribeRadiosJeep Wrangler EngineTrailer Wiring DiagramCherokee Language Repair Guides Within 98 Jeep Cherokee Wiring Diagram In 2004 Grand | Best Diagram Collection
What is the wiring diagram for a 1995 Jeep Wrangler?
1995 Ford F150 Engine Wiring Diagram and Pin On Wiring Diagram – 12+ 1995 Ford F150 Engine Wiring Diagram .1995 Ford F150 Engine Wiring Diagram and Pin On Wiring Diagram – Wiringg.net Miguel Blanco Mis Pines guardados Interactive Diagram – Jeep Wrangler YJ | A/C & Heating Jeep Parts | Morris 4×4 Center
What does a fuse on a Jeep Cherokee do?
Fuse box diagram (fuse layout), location, and assignment of fuses and relays Jeep Cherokee XJ (1984, 1985, 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996). A fuse is an element for protecting the electrical system. A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system.
When does the check gauge light come on?
The Check Gauges light will only come on after it’s hit third gear and has been running in it for a least 10 seconds. I tested this for about 5 minutes riding around my neighborhood in 1st and 2nd trying to keep it under 3rd. Once I hit the main streets, the light came on within 10-15 seconds. I tried this twice.
How does the O2 sensor work on a Jeep Cherokee?
With the O2 sensor’s feedback, the PCM in your Jeep, can fine tune the amount of fuel that’s being injected into the cylinders. Why? Well, because this fine-tuning helps to control emissions and improves gas mileage. How? By reporting if the air fuel mixture is either Rich or Lean.
The Check Gauges light will only come on after it’s hit third gear and has been running in it for a least 10 seconds. I tested this for about 5 minutes riding around my neighborhood in 1st and 2nd trying to keep it under 3rd. Once I hit the main streets, the light came on within 10-15 seconds. I tried this twice.
Why are all the lights flickering in my Jeep?
Long story short, the battery was going bad. It was causing some REALLY weird things to happen: dash lights flickering, seat heaters wouldn’t work for 2 to 3 minutes after a start, then the things I described above started happening. Changed the battery 6 months ago, everything disappeared!!!
What does it mean when your dash lights go out?
My ’05 also did that a couple of times, driving down the road and the dash lights go out for several seconds, also no gauges, then pop right back on. Also, started it one night, all dash lights are flashing, seatbelt/door chime chiming away furiously, no gauges.
Are there any electrical problems with a Jeep Grand Cherokee?
To all: Jeep Cherokees & Grand Cherokees are very prone to crappy cable grounds & such can cause all kinds of intermittent wierdness.
What are the problems with a 2000 Jeep Grand Cherokee?
1 Engine Stalls/Shuts Down While Driving 2000 Grand Cherokee Average Cost to Fix: $1,000 Average Mileage: 153,000 mi 2 Engine Failure 2000 Grand Cherokee Average Cost to Fix: $1,200 Average Mileage: 150,000 mi 3 Brakes Pulsate 2000 Grand Cherokee
Should your voltage regulator work just fine, then chances are the issue is caused by a fault with wiring – one of the two causes leading to a fully non-working instrument panel. This fact is especially true for a 2000 Jeep Cherokee, whose wires tend to rub through on the steering column that causes a short with the BCM.
What to do if your YouTube gauges are not working?
Easy fix. How to reset. – YouTube Gauges not working? Instrument cluster not working ? Easy fix. How to reset. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.