What kind of Springs does a YJ Dana 30 use?
The YJ Dana 30 is of course set up for leaf springs and the TJ Dana 30 is set up for coil springs. The Comanche (MJ) and Cherokee (XJ) use a reverse cut Dana 30 and the Grand Cherokee (ZJ) uses a normal cut Dana 30. Like the YJ and the TJ, these axles use a 5 on 4.5″ wheel bolt pattern. All of these trucks use coil springs up front.
What kind of axle does a jeep Dana use?
To get an idea of the whole differential end to end, here’s a TeraFlex Tera 30 Heavy Duty Front Replacement Axle Housing (Part TF-3503004). Note how the ends are made to accept spindles. The Dana 44 has been used on the front and rear of Jeeps.
What kind of wheel pattern does the Dana 30 use?
The YJ and the TJ Dana 30 uses the 5 on 4.5″ wheel bolt pattern. The YJ Dana 30 is of course set up for leaf springs and the TJ Dana 30 is set up for coil springs. The Comanche (MJ) and Cherokee (XJ) use a reverse cut Dana 30 and the Grand Cherokee (ZJ) uses a normal cut Dana 30.
What are the parts for a Jeep YJ front axle?
We even have a Jeep YJ front axle diagram that refreshes your memory on how the various components fit together. Just some of the parts for your front axle you will find in our inventory include ring and pinion sets or kits with varying ratios, differential side bearing sets, and differential carrier shim kits.
What’s the difference between YJ and Dana 30 axles?
The Dana 30 gear ratios are either 3.21 or 3.73. The width of the axle shafts is 1.13 inches. The YJ Dana 30 hold a reverse cut ring and pinion, but the TJs do not. Both TJs and YJs, however, use a 5×4.5 inch bolt pattern.
What is the fluid capacity of a Jeep Wrangler?
Jeep Wrangler JK Differential Fluid Capacity: Axle: Dana 30 Axle: Capacity: 2.1 Pints / 1 Liter: Fluid Type(ALL LISTED JK AXLES): 80w-90 or 75w-140 If towing Axles w/ Trac-lok differential must add 3.4 oz. of limited slip additiv: Axle: Dana 35 Axle: Capacity: 3.5 Pints / 1.7 Liters: Axle: Dana 44 Front Axle Capacity: 2.7 Pints / 1.3 Liters
What kind of lube to use on a Dana 30?
It should take about 3.5 pints, the dana 30 would take 2.5 pints I have always liked Mobil synthetic products. However, for our 1999 Jeep XJ Cherokee Dana 30 and Chrysler 8.25″ axles with ARB Lockers, I use Mopar 75W-120 synthetic gear lube.
What kind of fill plug does a Dana 35 use?
As for the rear axle fill plug, your rear axle is definitely a Dana 35. Earlier versions do use a metal fill plug. The front axle is a Dana 30 as you note… More sharing options… Moses / nbruno, thank you very much for the information, so I will start with conventional oil for now, until a rebuild is made.