What type of oil does a 2004 Jeep Wrangler take?
When equipped with the 2.4-liter inline-4 engine, the 2004 Jeep Wrangler takeS3. 78 liters (4 quarts) of 5W-30 motor oil The available 4.0-liter V6 getS5.
How do you check the oil on a Jeep TJ?
How to Check the Oil in a Jeep Wrangler JK
- Release the hood of your Jeep by detaching the rubber latches on both sides of the hood.
- Locate the oil dipstick in the engine compartment.
- Pull the dipstick straight out of the tube.
- Remove the dipstick again, and check the oil level reading toward the end of the stick.
How many quarts of oil does a Jeep Wrangler take?
For JK Wranglers from 2012-2018 with the Pentastar 3.6L engine, Mopar recommends using six quarts of 5W-20 oil, however you can also use 5W-30 depending on what type of driving conditions you expect to encounter.
How often should I change the oil in my Jeep Cherokee?
While many still swear by the old 3,000 mile rule, and that is fine if you do, today’s engines and oil blends do allow for a longer duration between changes. In fact, the Jeep manual recommends a swap every 8,000 miles or six months.
Can you change the oil on a Jeep Wrangler JL?
Editor’s Note: In 2018, Jeep produced both the older generation JK Wrangler as well as a new generation Wrangler, the JL. Although both vehicles do have the 3.6L Pentastar engine, the JL version is a slightly different oil change process. You can find information on changing the oil in your 2018-20 JL Wrangler here.
What kind of fluid does a Jeep Wrangler use?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type Clutch Fluid Fill to Full Mark DOT 3 Power Steering Reservoir Fill to Full Mark ATF 4 3.8L Cooling System 13 Quarts 50/50 Antifreeze/Water Mix 3.6L Cooling System (2013-2018) 10.5 Quarts 50/50 Antifreeze/Water Mix
How much oil is in a Jeep Wrangler?
Jeep Wrangler 3.8 l engine and oil pan capacity in liters, quarts, gallon, made in year 2007, 2008, 2009, 2010, 2011. How many US gallons or liters or US quarts of oil is needed to change the oil from the motor and oil pan on a Jeep Wrangler.
What are the numbers on a Jeep Wrangler fluid bottle?
The numbers on the bottles all relate to the thickness of the oil at certain temperature thresholds. With 0 being the viscosity of water, higher numbers mean thicker/slower flowing oils. In short, a 5w-30 oil flows faster than a 10w-40 oil. The “w” in the viscosity indicates the oil’s viscosity in winter temperatures.
What are the fluid capacities for a Jeep Wrangler?
It’s better to prevent issues from arising then fixing them when they do. Here are the fluid capacities laid out for your Jeep JK, YJ and TJ. If you like to do your own service on your JK Wrangler you will need to know the specifications for fluid changes.
Can you use GL-3 fluid in a Jeep Wrangler?
If it’s a GL-4 bottle without the GL-3 rating, don’t use it in a transmission calling for GL-3. ATF+4 and ATF+3, on the other hand, are significantly simpler. ATF+4 was developed to succeed ATF+3 applications and degrade much slower.