What kind of oil does a 1990 Jeep Wrangler take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (Below 16) |
|---|---|
| Capacity: | 4 quarts (with filter)After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
What kind of oil should I put in my Jeep Wrangler?
Just don’t forget to change the oil filter too! The best oil for your jeep Wrangler is clean oil. Irrespective of the type, may it be full synthetic or regular oil. What doesn’t or shouldn’t change is the oil replacement intervals.
What kind of coolant does a Jeep Wrangler use?
Mishimoto Liquid Chill Performance Coolant also guards against engine wear and corrosion, plus seals pinhole-sized leaks automatically. *Please see product pages for any exceptions.
What kind of transmission does a YJ Wrangler have?
The 2.5 liter straight 4 w/manual transmission was always paired with the AX-5. The TF 904 automatic transmission option was only made available from 94-95. Both straight 6 motors were matched with the TF 999 for the entire production run.
When did the Jeep Wrangler YJ come out?
know your wrangler. For the 1987 model year, AMC introduced the first Jeep Wrangler (YJ) to the market, which Chrysler continued to produce after the buy out in 1987. It replaced the AMC CJ-7, with very little change in terms of the body and frame. The most notable, and controversial change was the square headlamps.
What kind of oil does a Jeep Wrangler use?
Typically, high-mileage Jeeps that do an excessive amount of highway travel benefit more from synthetic engine oil. Jeeps with low mileage that typically see more trail use, that cause for frequent fluid changes, benefit more from conventional oil.
How often should I change the oil in my Jeep Wrangler?
A smooth reliable engine isn’t the result of premium fully synthetic engine oils changed at 10,000 mile intervals, but rather the regular changing of the oil and filter at recommended intervals. 4-Wheel drives and off-road driving techniques has been my passion for over 20 years.
What kind of brake fluid does a Jeep Wrangler use?
Utilizing a brake bleeder with a clear hose will help monitor the air bubbles as you bleed the brake lines. All Wranglers use DOT 3 brake fluid, making the maintenance even easier. What Oil Does My Transfer Case Need?
How much limited slip additive do I need for Jeep Wrangler?
For axles with the Trac-lok differential add 4 oz. of limited slip additive. For axles with the Trac-lok differential add 4 oz. of limited slip additive. For axles with the Trac-lok differential add 4 oz. of limited slip additive. For axles with the Trac-lok differential add 4 oz. of limited slip additive.