How do you reset the oil life on a Jeep Wrangler?
Turn the ignition to RUN position, don’t start the engine. Use the NAVIGATION button, navigate to VEHICLE INFO then scroll to REMAINING OIL LIFE. is displayed, press and hold the OK button until the OIL LIFE is reset to 100%.
How to reset the oil life monitor after an oil change?
Follow the steps below to reset the oil life monitor after each oil change. Turn the ignition to the “RUN” position. Immediately press and release the accelerator pedal 3 times within 10 seconds. Turn the ignition off. The 3.8 liter engine holds approximately 6 quarts (5.7 liters) of 5W-20 oil when the engine oil and filter are changed.
How to reset maintenance light on Jeep Wrangler?
1 Close all doors, gear in Park position. 2 Turn the ignition to RUN position, don’t start the engine. 3 Use the NAVIGATION button, navigate to VEHICLE INFO then scroll to REMAINING OIL LIFE. 4 Turn of the ignition.
How to reset the oil service Light Jeep Compass?
To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure: Turn the ignition switch to the ON/RUN position, do not start the engine.
Turn the ignition to RUN position, don’t start the engine. Use the NAVIGATION button, navigate to VEHICLE INFO then scroll to REMAINING OIL LIFE. is displayed, press and hold the OK button until the OIL LIFE is reset to 100%.
Follow the steps below to reset the oil life monitor after each oil change. Turn the ignition to the “RUN” position. Immediately press and release the accelerator pedal 3 times within 10 seconds. Turn the ignition off. The 3.8 liter engine holds approximately 6 quarts (5.7 liters) of 5W-20 oil when the engine oil and filter are changed.
1 Close all doors, gear in Park position. 2 Turn the ignition to RUN position, don’t start the engine. 3 Use the NAVIGATION button, navigate to VEHICLE INFO then scroll to REMAINING OIL LIFE. 4 Turn of the ignition.
To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure: Turn the ignition switch to the ON/RUN position, do not start the engine.